Get EASE OF USE AND COMFORT -> Ventilation Guide for Peugeot Boxer Van 2003-2013

Ventilation

Air flow

The force of the blown air, from

the vents, varies from 1 to the

strongest 4. Remember to adjust

this control in order to reach the

ambient air comfort level. To switch off the

blower, place the control in position 0.

Air distribution

The air supply distribution is directed by the

control turned towards:

WITH MANUAL ADJUSTMENT

Temperature adjustment

the side vents and the central

vents,

If your vehicle is fitted with these controls,

they are located on the dashboard on the

centre console control panel.

Control positioned:

-

in the blue zone provides cool

air,

the side vents, the central vents

and the footwells,

-

in the red zone provides

heating of the interior ambient

air.

Air conditioning

The air conditioning mode can only operate

with the engine running.

the footwells,

The air blower must be set to at

least 1.

Pressing the button triggers the

operation of the air conditioning,

the LED is on. Pressing the button again

switches the function off and the LED is

switched off.

the windscreen, the footwells and

the side windows,

the windscreen and the side

windows.

3

Ventilation

Intake of exterior air

This is the preferred operating

position.

Recommended settings for the Air Conditioning

For optimum operation of the system, the settings below are recommended:

Recirculation of interior air

This position should only be

temporary.

Air

If I require...

Heating

Temperature

Air flow

AC

distribution

recirculation

Used with the air conditioning

switched on and setting of the

force of blown air (from 1 to 4), recirculation

enables you to obtain the required ambient

air comfort level with both hot or cold

settings.

-

Recirculation temporarily prevents exterior

odours and smoke from entering the

passenger compartment.

Cooling

When your ambient air comfort level has

been reached, return to the intake of exterior

air position to permit renewal of the air in the

passenger compartment and demisting. This

operating mode is preferable.

Demisting

Defrosting

Ventilation

setting displayed and sufﬁcient recirculation of

air in the passenger compartment.

No further adjustments are required.

AUTO mode with personalisation

Switch on in AUTO mode, certain

settings can be modified: the

distribution, the air flow, the air

conditioning and the air intake/

recirculation.

The display changes from FULL AUTO to

AUTO.

To return to fully automatic operation, press

this button again. The display on the control

panel changes from AUTO to FULL AUTO.

If the system is not able to maintain

the setting selected following manual

adjustments, the setting flashes then AUTO

is cleared. Press the AUTO control to return

to the automatic settings.

MONO ZONE DIGITAL AIR

CONDITIONING

AUTO mode

Switching on FULL AUTO

mode: pressing the AUTO

control switches on the

If your vehicle is fitted with this system, the

controls are located in the middle of the

dashboard. The system can be identifid by

its control screen.

Switching off the air conditioning

system's functions, confirmed

by the display of FULL AUTO. This is the

normal operating mode for the digital air

conditioning system.

Pressing this control switches

off the air conditioning functions.

The snowflake is cleared from the

screen.

Control screen for your digital air

conditioning system.

Using the moving ring surrounding the AUTO

control, set the comfort temperature to be

reached according to a setting between:

When the engine is running and the air

conditioning is on, this symbol and the

message FULL AUTO are displayed.

Complete switch-off

-

HI (High to ≈ 32) and,

LO (Low to ≈ 16).

Pressing this control switches

the system off. The LED and the

screen switch off.

The other components are displayed

according to the settings selected by the user.

The system controls the distribution, ﬂow and

intake of air to ensure comfort equivalent to the

3

Ventilation

Air flow

Rapid demisting/defrosting

Comfort value adjustment ring

Successive presses of this button

increase (+) or reduce (-) the

force of the air flow to the interior.

Pressing this control permits

rapid clearing of the windows.

The LED is on.

The settings range between:

-

increasing the interior ambient air

temperature HI (High) which goes up to

to a maximum setting of 32,

The system manages the air conditioning,

the flow and intake of air, the defrosting

of the rear screen and provides optimum

distribution of the air to the windscreen and

front side windows.

-

cooling the interior ambient air

temperature LO (Low) which goes down

to a setting of 16.

Intake of exterior air/

recirculation of interior air

If your vehicle is fitted with additional

heating, switch it off to ensure rapid and

effective demisting/defrosting.

When the LED is on, the air

recirculates inside the passenger

compartment to prevent the entry of exterior

odours and smoke. This position should be

temporary.

Air distribution

Pressing illuminates the LED on the buttons

which distribute the air flow towards:

the windscreen and front side

window vents (demisting/

defrosting the windows),

When the ambient air comfort level has been

reached, pressing the button switches the

LED off and reopens the exterior air intake.

Pressing the AUTO button also restores

the intake of exterior air. Returning to this

position permits renewal of the air in the

passenger compartment and demisting.

Pressing the AUTO button again restores

the FULL AUTO function.

the central and side vents (chest

and face),

the vents in the front and rear

areas (feet).

The combination of buttons permits

improvement of air distribution.

Ventilation

ADDITIONAL HEATING SYSTEMS

Additional heating

This is an additional passenger compartment

heating system which supplements the

standard equipment.

It can operate independently of the engine.

Depending on the level of finish of the

equipment, its start-up can be programmed.

Additional heater or programmable

heating

This is an additional and separate system

which heats the Diesel engine hot coolant

loop to make starting easier.

Supplementary heating

REAR HEATING AND/OR AIR

CONDITIONING

On the 2-3 seats version, this is located

under the seat on the driver's side with air

diffusion directed forwards.

If your vehicle is fitted with an

additional air conditioning unit,

located in the rear of the vehicle:

It improves the demisting and defrosting

performance and that of the heated seats, if

fitted to the vehicle.

On the 5-9 seats version, it is

located at the rear. Depending

on the model version, the air

the distribution duct located in

The passenger compartment heating is

brought up to temperature more rapidly.

the roof and the individual diffusion vents

provide a perfect diffusion of cold air.

diffusion is either direct from the

rear or comes from the rail located under

each of the two rows of seats.

This system must be programmed to start up

before you enter the vehicle.

The warm air diffused at the floor, from the

front air conditioning unit, is distributed at

the feet of the rear passengers of rows 2

and 3.

Press this control to activate/

deactivate the heating. The LED

is on if the heating is activated.

When rapid demisting and

defrosting is required, switch off

the control.

A warm air diffusion vent, located on the rear

left wheelarch, may complete the assembly

for the feet of the rear passengers of row 3.

3

Ventilation

To deactivate the blower, place the control in

position 0.

However, a safety device will ventilate the

rear circuit automatically, even if the control

is in position 0, to prevent the formation of

condensation.

Activation/Deactivation

This control, located on the

control panel at the right-hand

end of the dashboard, enables

you to activate/deactivate the

operation of the rear controls from the

driver's seat.

Comfort value adjustment

Control positioned:

-

on the blue, produces cool air,

The first press activates (LED on).

A second press deactivates (LED off).

-

on the red, produces heating

of the ambient air.

Air flow

The force of the blown air, via

the vents, varies from 1 to the

strongest 4.

To obtain a comfortable level of

ambient air, remember to adjust this control.

The OFF control on the "Mono-zone" central

control panel switches the function off.

Ventilation

Heating cycle indicator lamp

Display on

Displaying the programme

number selected

Time display button

Time setting buttons

Selection of the stored

programme

An integrated clock permits programming of

its start time. The passenger compartment

will be heated more quickly.

PROGRAMMABLE ADDITIONAL

HEATING

Button for immediate switching

on of the heating

If your vehicle is fitted with separate

programmable heating: it gradually brings

the engine up to a good temperature to

facilitate starting.

Digital programming control

Time setting and reading

indicator lamp

The programmable heating system control

panel is located at the bottom right of the

dashboard.

3

Ventilation

Setting the time of the internal clock

Immediate switching on of the

heating

Set the clock on the control panel before

programming the deferred switching on of

the heating.

Before switching on the heating, check that:

-

the temperature setting control is in the

"Hot air" position (red).

Press this button.

-

the air flow setting control is in

position 2.

This symbol or the previous stored time

and the number (e.g. 1) corresponding to

the recalled pre-selection are displayed for

ten seconds.

The screen and the associated

indicator lamp come on.

Press this button.

Within ten seconds, press these two setting

buttons until the correct time is displayed.

The screen and the heating

cycle indicator lamp come on

and remain on throughout the

duration of operation.

Note: if you wish to recall the other

pre-selected times, press the SET button

several times before the ten seconds have

elapsed.

Press ">" to increase the hours or

"<" to decrease.

Switching on the deferred heating

Press and hold the button for

more rapid scrolling of the digits.

Switching on can be programmed between

one minute and twenty-four hours in

advance.

Within the ten seconds, press

these two setting buttons to

select the required start time.

You can store up to three different start

times, but programme one deferred start

only.

Reading the time

Setting of the stored time is

confirmed by clearing of the start

time, display of the pre-selection

number (e.g. 1) and increased

brightness of the screen

illumination.

Press this button.

Note: if you wish to start the heating at a

fixed time each day, simply reprogramme

the stored time each day.

This indicator lamp comes

on, the time is displayed for

approximately ten seconds.

Press this button, the screen

becomes brighter.

Ventilation

Have the additional heating system

Cancelling the programming

Good practice

checked at least once a year at the

beginning of winter. Maintenance and

repairs should only be carried out by a

PEUGEOT dealer.

Press this button briefly to clear

the programmed start time.

To avoid any risk of poisoning or

asphyxiation, the additional heating must

not be used, even for short periods, in

an enclosed space such as a garage or

workshop which is not fitted with an exhaust

gas extraction system.

The screen illumination and the

pre-selection number (e.g. 1) are

switched off.

Use only genuine replacement parts.

Recalling one of the pre-selected

start times

The additional heating is supplied by the

vehicle’s fuel tank.

Two different types of equipment

Ensure that the fuel gauge indicator lamp is

not at reserve.

Press this button as many times

as necessary until the number

corresponding to the required

pre-selected start time (e.g. 2)

appears.

The additional heating is separate and

programmable. Before you enter the vehicle,

it gradually increases the temperature of the

engine to make starting easier.

Always switch off the additional heating

when filling with fuel to avoid any risk of fire

or explosion.

After ten seconds, the time is cleared but

remains stored for as long as the number

(e.g. 2) and the screen remain on.

Do not park the vehicle on an inflammable

surface (dry grass, dead leaves, paper…),

there is a risk of fire.

This also facilitates passenger compartment

heating, demisting and defrosting.

The temperature near the heater must not

exceed 120 °C. A temperature higher than

this (for example in the case of painting in

an oven) could damage the components of

the electronic circuits.

The additional passenger compartment

heating system supplements the

standard equipment. Its operation may be

independent of the engine.

Switching off the heating

Press this button.

The heating cycle indicator lamp

and the screen are switched off.

Switching on of the heating may be

programmable.

The additional heating system is fitted with

a temperature limiter which cuts off the

combustion in the event of overheating due

to a lack of coolant.

Top up the coolant, then press the

programme selection control before

switching the heating on again.

3

Seats

SEATS

DRIVER'S SEAT

Head restraint

Press the tab to adjust the height of the

head restraint.

To remove the head restraint, press the tabs

and raise the head restraint.

Adjustable armrest

Turn the control located under the end of

the armrest.

Seats

Heated seat

Use this control to switch the heating of the

seat on or off.

Lumbar support

Seat cushion height adjustment

Turn the control.

Lift the handle 1 to raise

or lower the front of the seat.

Lift the handle 2 to raise

or lower the rear of the seat.

Seat with variable damping

If your seat is fitted with this system, turn the

control to adjust the level of damping to suit

the driver's weight.

Seat back angle

Forwards-backwards adjustment

Turn the control to adjust the angle of

the seat back.

Lift the control bar, located under the seat,

and adjust to the required position.

Rotating seat

If fitted on your seat, press the control to

rotate the seat by 180°.

3

Download User Manual App

EASE OF USE AND COMFORT -> Ventilation for Your Peugeot Boxer Van 2003-2013

Related Topics

EASE OF USE AND COMFORT

Popular Owner Manuals

Latest Owner Manuals