Get EASE OF USE AND COMFORT -> Seats Guide for Peugeot Boxer Van 2003-2013

Seats

2-SEAT FRONT BENCH

This is fitted with two seat belts.

Grab handle

This is located above the centre passenger.

Writing table

The back of the centre seat folds to form a

writing table.

Pull the handle located at the top of the seat

back cushion.

Seats

REAR SEATS

Seat back angle

Turn the control to adjust the

angle of the seat back.

Access to the rear seats

To gain access to row 3, manoeuvre the

control on the outer seat of row 2 and tilt the

seat back forwards.

To return the seat back to its initial position,

bring it to the vertical position without

touching the control.

Seat back folded position of the

central seat (rows 2 and 3)

The back of the central seat can be folded

fully onto the cushion and used as a cup

holder table.

Lower the head restraint then raise the

control and fold the seat back forwards.

To return the seat back to its initial position,

raise the control again.

3

Seats

Turn the two levers upwards.

Raise the bench seat and remove it.

REAR BENCH SEATS

Good practice

Removing the bench seat

Following the various operations:

Access to the rear seats

-

do not remove a head restraint without

storing it securely,

At least two people are required to

remove the bench seat.

Lower the head restraints then raise the

control and tilt the seat back forwards.

do not travel in row 3 with the row 2

bench seat in the vertical position,

Fold the seat back onto the cushion as

described above.

Seat back folded position

do not store any kind of object on the

folded seat back of row 2,

Turn the two levers forwards.

Remove the head restraints then tilt the seat

back as described above.

Tilt the base of the bench seat forwards to

place the assembly in the vertical position.

check that the seat belts are always

accessible and easy for the passenger

to use,

With your right hand, raise the lever then tilt

the seat back 5° towards the rear.

With your left hand, tilt the seat back

forwards onto the cushion.

-

a passenger must not take their seat

without correctly adjusting their seat's

head restraint and adjusting and

fastening their seat belt.

Seats

CREW CAB

Access to the box under the bench seat Good pratice

Do not tilt the bench seat cushion during

transportation.

Consisting of an ergonomic 4-seat bench

and a high-strength partition, it offers

comfort and safety.

From the cab

Tilt the seat cushion forwards to gain access

to the large box.

No not attach anything to the cab fixing

structure.

Each seat of the bench is fitted with an

inertia reel seat belt.

Do not exceed the number of passengers

indicated on the registration certificate.

From the load space

Refer to section 5 to read the "Good

practice" recommendations.

Raise the two flaps which make the full

length at the floor available. The flaps are

retained in the raised position by magnets

on the back of the partition.

Do not install child seats, booster cushions or

carrycots on the rear seats of the crew cab.

In the rear, the load space is intended for

the transportation of goods only.

You are advised to place the goods or heavy

objects as far forwards as possible in the

load space (towards the cab) and secure

them by means of straps using the stowing

rings on the floor.

3

Practical information

PRACTICAL INFORMATION

CAB FITTINGS

Central storage tray

Front seat storage

Folding writing table

This may be lockable (according to

specification).

A storage drawer is provided under the front

seat (driver's).

This is located in the centre of the

dashboard.

The space under the passenger's seat is

used to store the tools required in order to

change a wheel.

The clip can be used to secure documents,

slips, ...

Pull or push the top of the table to unfold or

fold it.

If your vehicle is fitted with a seat with

variable damping, it does not have any

storage compartments.

If your vehicle is fitted with a front

passenger airbag, the table cannot be

raised.

Practical information

Glove box

Cooled glove box

Sun visor

This is located on the top right part of

the fascia panel.

To avoid glare from ahead, fold the sun

visor down.

The ventilation flap can be opened or

closed. The air blown into the glove box is

the same as that blown out via the vents.

Pockets are arranged in the sun visors for

storing toll cards, tickets, ...

3

Download User Manual App

EASE OF USE AND COMFORT -> Seats for Your Peugeot Boxer Van 2003-2013

Related Topics

EASE OF USE AND COMFORT

Popular Owner Manuals

Latest Owner Manuals