Get QUICK HELP -> Changing a bulb Guide for Peugeot Boxer Van 2003-2013

Changing a bulb

CHANGING A BULB

TYPES OF BULB

Various types of bulb are installed on your

vehicle. To remove them:

Type A Entirely glass bulb: pull gently

as it is fitted by pressure.

Type B Bayonet bulb: press on the bulb

then turn it anticlockwise.

FRONT LAMPS

Type C Cylindrical bulb: move aside the

contacts.

Open the bonnet. To access the bulbs, reach

behind the headlamp unit.

Carry out the operations in reverse order to

refit each bulb.

Type D - E Halogen bulb: release the

retaining spring from its

housing.

Changing a bulb

-

Remove the bulb by pressing it lightly

while turning it anticlockwise.

Change the bulb.

5 - Foglamps

Type D, H1 - 55 W

-

Turn the steering fully to the left.

Unscrew the screw located in the wheel

arch then open the flap.

-

Remove the cover.

Disconnect the electrical connector.

Release the retaining spring by pressing

on the two clips.

1 - Dipped beam headlamp

3 - Main beam headlamp

-

Change the bulb taking care to align the

metal part with the grooves on the lamp.

Type D, H7 - 55 W

Type E, H1 - 55 W

-

Remove the cover by turning it

anticlockwise.

-

Remove the cover by turning it

anticlockwise.

-

Disconnect the electrical connector.

-

Disconnect the electrical connector.

Halogen bulbs must be changed after

the headlamp has been off for several

Release the retaining spring by pressing

on the two clips.

Release the retaining spring by pressing

on the two clips.

minutes (risk of serious burns). Do not

touch the bulb directly with your fingers,

use lint-free cloths.

-

Change the bulb taking care to align the

metal part with the grooves on the lamp.

-

Change the bulb taking care to align the

metal part with the groove on the lamp.

When each operation has been completed,

check the operation of the lamps.

2 - Sidelamp

4 - Direction indicators

Type A, W 5 W - 5 W

Type B, PY 21 W - 21 W

When using a high pressure washer

on stubborn dirt, do not persist on the

headlamps, the lamps and their edges to

avoid damaging their lacquer finish and

seals.

-

Remove the cover by turning it

anticlockwise.

-

Turn the bulb holder a quarter turn

anticlockwise.

Remove the bulb holder fitted by

pressure.

Change the bulb.

8

Changing a bulb

Front/Rear

DIRECTION INDICATOR SIDE

REPEATER

SIDE MARKER LAMPS

COURTESY LAMPS

Type A, W 5 W - 5 W

Type A, W 16 W F - 16 W

-

If your vehicle is fitted with these lamps

(van type L4), unscrew the two screws

using the screwdriver supplied.

Type C, 12 V 10 W - 10 W

-

Move the mirror glass to access the

screws.

-

Press the points, indicated by the

arrows, then remove the courtesy lamp.

Unscrew the two screws using the

screwdriver supplied.

-

Pull the bulb holder to release it from the

lugs.

-

Open the protective flap.

Change the bulb moving aside the

two contacts.

Pull the bulb holder to release it from the

dog points.

Pull the bulb then change it.

-

Ensure that the new bulbs are secured

correctly between the two contacts.

Pull the bulb then change it.

-

Close the protective flap.

Fix the courtesy lamp in its housing and

ensure that it is secured correctly.

Changing a bulb

-

Remove the two fixing nuts.

-

Ensure that the new bulbs are secured

correctly between the two contacts.

REAR LAMPS

For more information on the bulbs, refer to

the table "Types of bulb".

Pull the lens block from the outside.

Replace the plastic lens and press on it.

Unscrew the three screws using the

screwdriver supplied (under the front

passenger seat) and extract the bulb

holder.

1. Brake/sidelamps

Type B, P 21/5 W - 5 W

-

Remove the faulty bulb by pressing it

lightly while turning it anticlockwise.

THIRD BRAKE LAMP

Type B, P21 W - 21 W

2. Direction indicators

Change the bulb.

Type B, PY 21 W - 21 W

-

Unscrew the two screws.

Remove the lamp.

3. Reversing lamps

Remove the bulb holder moving aside

the two tabs.

Type B, P 21 W - 21 W

Type A, C 5 W - 5 W

4. Foglamps

-

Press the point, indicated by the arrow,

then remove the plastic lens.

-

Remove the faulty bulb by pressing it

lightly while turning it anticlockwise.

Type B, P 21 W - 21 W

-

Identify the faulty bulb then open the

rear doors.

-

Change the bulb by moving aside the

two contacts.

Change the bulb.

-

Disconnect the electrical connector.

8

Download User Manual App

QUICK HELP -> Changing a bulb for Your Peugeot Boxer Van 2003-2013

Related Topics

QUICK HELP

Popular Owner Manuals

Latest Owner Manuals