Get Getting to know your vehicle -> Exterior Lights Guide for Peugeot Expert Van Third Generation (2016-2025)

Getting to know your vehicle

Rear window washer

Rear window wiper and

washer

2

Select

Washer fluid is sprayed onto the rear window

Rear window wiper

and the wiper wipes as long as

Exterior Lights

Warning

is selected.

Do not look directly into the LED

headlights. Risk of eye damage.

Lighting controls

Keep the sensor free from dust, dirt and ice.

Adjustable sensitivity of the rain sensor

0:

off

intermittent wiping

:

screen wash

Do not use if the rear window is frozen or when a

bicycle carrier is used.

Switch off in car washes.

The rear window wiper comes on automatically

when the windshield wiper is switched on and

reverse gear is engaged.

The function can be activated or deactivated in

the settings app in the Info Display.

To activate the rear wiper the next time the

ignition is switched on, turn to position 0 and

Turn adjuster wheel:

Turn the adjuster wheel to adjust the sensitivity.

The longest dash indicates the highest sensitivity

and the shortest dash indicates the lowest

sensitivity.

AUTO

: automatic light control switches au-

tomatically between daytime running

lights and headlights

A wiping cycle confirms the selection.

back to

.

: sidelights

: low beam/high beam

55

Getting to know your vehicle

activated, the blue

beam is on.

illuminates when high

Automatic light control

High beam

High beam assist switches automatically to low

beam when:

-

Driving in urban areas.

Camera detects heavy fog.

Rear fog light is switched on.

Oncoming or preceding vehicles are detected

by the camera.

If there are no restrictions detected, the system

switches back to high beam.

Deactivation

The system can be deactivated via the vehicle

settings menu on the Info Display.

When the adjuster wheel is in position AUTO

and the engine is running, the system switches

between daytime running lights and headlights

automatically depending on the external lighting

conditions and information given by the wiper

system.

To activate or deactivate the high beam, pull the

lever beyond the resistance point.

Headlight flash

High beam assist

The system switches from low beam to high

beam and vice versa to prevent glaring. Once

activated, high beam assist remains active and

switches high beam on and off depending on

surrounding conditions. The latest setting of the

high beam assist will remain set after the ignition

is switched on again.

Automatic headlight activation

Turn the adjuster wheel in position: AUTO

During poor lighting conditions the headlights are

switched on.

Additionally, headlights are switched on if the

windscreen wipers have been activated for

several wipes.

Activation

The high beam assist can be activated via the

vehicle settings menu on the Info Display.

High beam is switched on automatically in dark

surroundings at a speed above 45 km/h. High

beam is switched off at a speed below 35 km/h,

but high beam assist remains active.

To activate the headlight flash, pull the lever

briefly without passing the resistance point.

The green control indicator

illuminates

continuously when the high beam assist is

56

Getting to know your vehicle

Headlight height

adjustment

Turn Signals

Emergency Signals

2

Manual adjustment

Operated by pressing

.

up:

right turn light

left turn light

Hazard warning flashers are switched on

automatically in the following situations:

down:

To adapt headlight range to the vehicle load

X

to prevent dazzling: turn thumb wheel

required position.

to

-

Braking in an emergency (depending on the

force of deceleration).

A resistance point can be felt when moving the

indicator lever.

Constant flashing is activated when the indicator

lever is being moved beyond the resistance

point. It is deactivated when the steering wheel

is moved in the opposite direction or indicator

lever is manually moved back to its neutral

position. After 20 seconds the volume of the

audible signal will increase if the speed is above

80 km/h.

Activate temporary flashing by holding the

indicator lever just before the resistance point.

Turn lights will flash until indicator lever is being

released.

-

In the event of an accident.

0: front seats occupied

They are switched off the first time you

accelerate or if you press

1: up to five people or partial load

.

2: all seats occupied or driver and intermedi-

ate load

Automatic Lighting

The automatic lighting systems use a detection

3: driver and permissible max. load

camera, located at the top of the windscreen.

Headlights when driving abroad

Operating limits

If planning to use your vehicle in a country that

drives on the other side of the road, the dipped

beam headlamps must be adjusted to avoid

dazzling oncoming drivers.

The system may be disrupted or not work

correctly:

To activate three flashes, tap the indicator lever

briefly without passing the resistance point.

-

When visibility conditions are poor (e.g.

snowfall, heavy rain).

Contact your dealer or a qualified workshop.

If the windscreen is dirty, misted-up or

masked (e.g. sticker) in front of the camera.

57

Getting to know your vehicle

Turn the control wheel once to activate or

deactivate the front fog light.

Turn the adjuster wheel forwards / backwards to

switch on / off the front fog light.

-

If the vehicle is facing highly reflective signs

or safety barrier reflectors.

Light switch in position AUTO: switching on front

fog lights will switch headlights on automatically.

Turn the adjuster wheel two times forwards /

backwards to switch on / off the rear fog light.

Light switch in position AUTO: switching on rear

fog light will switch headlights on automatically.

The system is not able to detect:

-

Road users that do not have their own

lighting, such as pedestrians.

Rear foglamps

Depending on version:

Vehicles with hidden lighting (e.g. travelling

behind a safety barrier on the motorway).

Light switch in position

: rear fog light can only

be switched on with front fog lights.

Vehicles at the top or bottom of a steep

slope, on winding roads, on crossroads.

Reverse lights

The reversing light comes on when the ignition is

on and reverse gear is selected.

Caution

Clean the windscreen regularly,

particularly the area in front of the camera.

The internal surface of the windscreen can

also become misted around the camera.

In humid and cold weather, demist the

windscreen regularly.

Do not allow snow to accumulate on the

bonnet or roof of the vehicle as this could

obstruct the camera.

Daytime running lights

Daytime running lights increase visibility of the

vehicle during daylight.

They are switched on automatically when the

engine is running or by adjusting 0 or AUTO.

The system switches between daytime running

lights and low beam automatically, depending on

the lighting conditions.

Turn the adjuster wheel forwards/backwards to

switch on/off.

Front foglamps

Automatic Headlights

Dipping

Available only on versions equipped with Full

LED technology headlamps.

With the ring of the lighting control stalk in the

AUTO position and the function activated on the

touch screen, this system automatically switches

between dipped and main beam headlamps,

according to lighting and traffic conditions, using

a camera located at the top of the windscreen.

Warning

This system is a driving aid.

The driver remains responsible for the

vehicle's lighting, its correct use in the

58

Getting to know your vehicle

prevailing light, visibility and traffic conditions,

and for compliance with driving and vehicle

regulations.

Welcome Lighting

Some or all of the following lights are switched

on for a short time by unlocking the vehicle with

the radio remote control:

Corner Lights

2

NOTE:

The system becomes operational when the

vehicle exceeds 16 mph (25 km/h).

When the speed falls below 9 mph (15 km/h),

the function is no longer operational.

-

headlights

tail lights

interior lights

Activated at a speed of up to 40 km/h when

turning off. Depending on the steering angle or

the activation of the turn lights the front fog light

illuminate the direction of travel.

The number of activated lights depends on the

surrounding light conditions.

The lighting switches off immediately when the

ignition is switched on.

Guide Me Home

Automatic

With the ring of the lighting control stalk in the

AUTO position and when the light is poor, the

dipped beam headlamps come on automatically

when the ignition is switched off.

This function can be activated or deactivated in

the vehicle personalisation.

The following lights will additionally switch on

when the driver's door is opened:

-

illumination of some switches

Driver Information Centre

Interior lights

With Touch Screen & Bluetooth Radio

Courtesy Lights

During entry and exit of the vehicle, the front and

rear courtesy lights automatically switch on and

then off after a delay.

Exit lighting

The following lights are switched on when the

You can activate/deactivate this function

and adjust the guide-me-home lighting

duration in the Driving touch screen

menu.

ignition is switched off:

-

headlights

Front and rear courtesy light

interior lights

With PEUGEOT i-Connect Advanced -

PEUGEOT i-Connect

centre console lighting

They will switch off automatically after a delay.

This function works only in the dark.

The function can be activated or deactivated in

You can activate/deactivate this function

and adjust the duration of the guide-me-

home lighting in the Settings > Vehicle

touch screen application.

the settings app

in the Info Display.

Manual

-

With the ignition off, pull the lighting control

stalk toward you ("headlamp flash") to

activate/ deactivate the function.

Manual guide-me-home lighting goes off

automatically after a period of time.

59

Getting to know your vehicle -> Exterior Lights for Your Peugeot Expert Van Third Generation (2016-2025)

Related Topics

Getting to know your vehicle

Popular Owner Manuals

Latest Owner Manuals