Get Getting to know your vehicle -> Interior Storage / Interior Features Guide for Peugeot Expert Van Third Generation (2016-2025)

Getting to know your vehicle

Cup holders are located at the sides of the

instrument panel.

Glove Compartment

Sunroof

2

Rear cupholder

Glass panel

Sunblinds

To open the glovebox pull the handle.

Some versions have a power outlet and

the switch for the front passenger airbag

deactivation in the storage compartment.

The glovebox should be closed whilst driving.

A cupholder for the second row seat can be

located in the storage compartment in the

footwell.

The sunblinds are operated manually.

Slide the respective sunblind to the desired

position.

Cupholders

Front cupholder

Interior Storage / Interior

Features

Storage compartments

Warning

Do not store heavy or sharp objects in the

storage compartments.

Cupholders for the third row seats can be

located in the sides of the load compartment.

61

Getting to know your vehicle

Fold up the multifunctional table.

To open the storage compartment press the

button and open the cover.

There may be a storage box under the centre

and left bench seat. Lift up the seat cushion.

Depending on version the storage box can be

removed from the back to accommodate long

objects.

Front storage

Seatback Storage

Storage box

12V Power Outlets

To open the storage compartment press the

button and open the cover.

Some versions have a glovebox cooler in the

storage compartment.

There may be a storage box under the centre

bench seat next to the driver seat. Lift up the

seat cushion by pulling the handle.

A 12 V power outlet is located in the glovebox.

62

Getting to know your vehicle

deactivated in the event of low vehicle battery

voltage.

2

Electrical accessories that are connected must

comply with the electromagnetic compatibility

requirements laid down in DIN VDE 40 839.

Do not connect any current-delivering

accessories, e.g. electrical charging devices or

batteries.

Do not damage the outlet by using unsuitable

plugs.

USB Ports

Depending on version, a USB port is located

next to the Info Display. It can charge external

devices and provide a data connection to the

Infotainment system.

A 12 V power outlet may be located on the third

row left side trim.

Do not exceed the maximum power consumption

of 120 W.

Depending on version, two USB ports are

located in the instrument panel.

The left USB port can charge external

devices and provide a data connection to the

Infotainment system. The right USB port can

only charge external devices.

Two USB ports may be located at the lower left

side of the B-pillar. Both USB ports can only

charge external devices.

A 220 V power outlet may be located underneath

the front passenger seat.

Do not exceed the maximum power consumption

of 120 W.

With ignition off, the power outlets are

deactivated. Additionally the power outlets are

NOTE:

The sockets must always be kept clean and dry.

63

Getting to know your vehicle

On some mobile devices, a back cover with an

integrated coil or a jacket may be required to use

inductive charging.

Protective cover for the mobile device could

have impact on the inductive charging.

In the event that the mobile device is not

charging properly, rotate it 180° and place it on

the charging device again.

Wireless Phone Charger

Load compartment

Depending on version, the load compartment

area can be increased by folding up or removing

the seats in the second and third row.

Warning

Inductive charging can affect the operation

of implanted pacemakers or other medical

devices. If applicable, seek medical advice

before using the inductive charging device.

Vehicle version with seat benches in second

and third row

When loading the following has to be observed:

Status LED

Warning

-

Only store objects on seats of the third row

folded down to the table position, when the

seats in the second row are also folded down

to the table position.

Remove any metal objects from the

charging device before charging a mobile

device, as these objects could become very

hot.

To charge a mobile device:

-

Bench seat in the second or third row in the

tilted position: the outer seat must not be

occupied.

The LED indicates the current charging status.

Illuminates green

The mobile device is charging.

Flashes yellow

The mobile device has not been centred properly

in the charging zone or an unknown object has

been detected in the charging zone.

► Remove all objects from the charging device.

-

Single bench seat in the second or third row

in the tilted position: the center seat must not

be occupied.

► Place the mobile device on the charging

area. Note that the mobile device must be

placed between the positioning aids.

Illuminates yellow

There is a problem with the mobile device's

battery or a fault of the inductive charger has

been detected.

Qi compatible mobile devices can be charged

inductively.

If the problem persists, seek the assistance of a

workshop.

64

Getting to know your vehicle

Removing the flap (type A)

To install the load compartment cover insert it in

the retainers on both sides.

2

Lashing eyes

-

Seat in the second row folded down to the

table position: respective seat in the third row

must not be occupied.

► Release the locking device, lower the flap

and then remove it.

The lashing eyes are designed to secure items

against slippage, e.g. using lashing straps or

luggage net.

Lashing eyes may be located on the vehicle

floor. The number and location of the lashing

eyes may vary depending on the vehicle.

-

Seat in the second row in the tilted position:

respective seat in the third row must not be

occupied.

► Stow the flap behind the driver’s seat.

Turn the locking device upwards.

Put the hinges of the flap in their housing, lift

the flap and close the locking device.

Load compartment cover

Do not place any objects on the cover.

Cargo management system

Flap behind the passenger seat

Depending on version, a partition behind

the front seats protects the driver and front

passengers against the risk of load movement.

There may be a flap in the partition behind

the passenger seat which can be removed to

accommodate long objects.

If the outer passenger seat is folded and the flap

is open, the centre seat has to stay free.

Raise the load compartment cover to remove it.

65

Getting to know your vehicle

Sliding the flap (type B)

► Fix the net like shown on the picture.

► Attach the hooks to the lashing eyes in the

glovebox and on the floor.

Slide the flap to the side. It is kept in position by

magnets.

After transportation remove the protective net

and fold down the seat.

Fitting the protective net

The protective net must be installed whenever

the bench seat of the front passenger side is

folded and the partition flap is open.

Second row bench seat in the commercial

vehicle

The bench seat in the second row can be folded

to increase the load compartment.

► Lift the seat cushion of the bench seat of the

front passenger side.

Warning

See the section seat folding in the chapter Front

Seats.

When seats are being adjusted or folded,

keep hands and feet away from the moving

area. Risk of injury.

Ensure that there are no objects on the

anchor points or rails.

Never adjust seats while driving as they could

move uncontrollably.

Drive only with engaged seats and backrests.

► Fit the attachment in the opening.

To lock the attachment turn it clockwise a

quarter turn.

66

Getting to know your vehicle -> Interior Storage / Interior Features for Your Peugeot Expert Van Third Generation (2016-2025)

Related Topics

Getting to know your vehicle

Popular Owner Manuals

Latest Owner Manuals