Instruments
Under-inflation detection
Range indicator
You have to reinitialise the under-inflation
detection system after adjusting one or more
tyre pressures or after changing one or more
wheels.
This function gives an estimate of the number
of miles (km) that your vehicle can still cover,
based on the recent conditions of use (driving
style, use of heating, air conditioning...).
Selecting the set of wheels and
tyres fitted
If you have previous registered a second set
of wheels and tyres with sensor, you have to
select the corresponding set in the instrument
panel screen after fitting them.
Carry out the following procedure to do this.
F
F
Press button A to select the system.
Press and hold button A for at least
3 seconds.
Carry out the following procedure to do this.
F
F
Press button A to select the system.
Press and hold button A for more than
10 seconds, to change from set of tyres
and wheels 1 to set 2 or the other way
round.
When the remaining range falls to a low level,
"- - -" is displayed in the instrument panel.
There is an audible signal and the under-
inflation warning lamp flashes slowly until the
initialisation is complete.
24
English