Get Instruments -> Service indicator Guide for Peugeot Ion 4 Door First Generation (2010-2020)

Instruments

Lighting dimmer

Service indicator

System which informs the driver when the

next service is due in accordance with the

manufacturer's servicing schedule.

The point at which the next service is due is

calculated from the last service indicator zero

reset.

This point can be indicated in one of two ways:

-

the miles (km) remaining,

the time remaining to the next service.

System for manual adjustment of the

brightness of the instruments and controls in

relation to the exterior brightness.

With the lighting on or off, press button A to

select the function, then hold down to change

the intensity of the lighting of the instruments

and controls in "day" or "night" mode.

The intensity of the lighting increases each time

button A is pressed.

When the lighting reaches the maximum

setting, press again to change to the minimum

setting.

When the lighting reaches the required

intensity, release button A.

Operation

1. The screen indicates that 620 miles

(1000 km) or 1 month remain before the

next service.

2. The screen indicates that the date for the

service has been exceeded.

Every time the ignition is switched on,

the service spanner is displayed for a

few seconds to remind you that a service

should be carried out as soon as possible.

3. Once the service has been carried out, the

distance or the number of months to the

next service is displayed again.

When the ignition is switched on, press

button A several times in succession until the

service indicator is displayed in the desired

units.

The setting is saved when you release button A

and retained when the ignition switch is turned

to OFF.

22

Instruments

1

Resetting the service indicator to zero

After each service, the service indicator should

be rest to zero.

The procedures is as follows:

The display of "---", indicating that the

service date has arrived, comes on

automatically after a certain time and

distance travelled. The screen then

indicates the time remaining before the

next service is due.

F

Switch off the ignition (switch in the LOCK

or ACC position).

Press the reset button A several times in

succession until the service indicator is

displayed.

F

Press and hold the reset button for a few

seconds until the spanner flashes.

Press the reset button while the spanner is

flashing to change the display from "---" to

"CLEAR".

The distance (or time) remaining before the

next service is due is displayed.

23

Instruments

Under-inflation detection

Range indicator

You have to reinitialise the under-inflation

detection system after adjusting one or more

tyre pressures or after changing one or more

wheels.

This function gives an estimate of the number

of miles (km) that your vehicle can still cover,

based on the recent conditions of use (driving

style, use of heating, air conditioning...).

Selecting the set of wheels and

tyres ﬁtted

If you have previous registered a second set

of wheels and tyres with sensor, you have to

select the corresponding set in the instrument

panel screen after fitting them.

Carry out the following procedure to do this.

F

Press button A to select the system.

Press and hold button A for at least

3 seconds.

Carry out the following procedure to do this.

F

Press button A to select the system.

Press and hold button A for more than

10 seconds, to change from set of tyres

and wheels 1 to set 2 or the other way

round.

When the remaining range falls to a low level,

"- - -" is displayed in the instrument panel.

There is an audible signal and the under-

inflation warning lamp flashes slowly until the

initialisation is complete.

24

Instruments -> Service indicator for Your Peugeot Ion 4 Door First Generation (2010-2020)

Related Topics

Instruments