Practical information
CREW CAB
Bench seat
Head restraints and seat belts
Placing the bench seat in
the fully folded position
The three seats are equipped with
inertia reel seat belts. The seat belts
of the outer seats are secured to the
body, whereas the seat belt of the
centre seat is secured to the back of
the bench seat.
Each seat has a head restraint bolted
onto the load retaining grille and which
can be removed.
-
If necessary, move the front seats
forward and fasten the strap of the
seat belt of the centre seat.
The crew cab consists of a 3-seat
bench, located in row 2, the one-piece
back of which is in unit with the "load
retainer" grille.
Access to the rear seats is via the
sliding side door.
-
Check that the seat belt straps and
buckles are positioned correctly
along the side panels, to ensure
that the sliding of the seat back is
not hindered.
Do not store a head restraint inside the
vehicle unless it is properly stowed or
fixed to a support.
-
Release the seat back using the
control A.
Do not drive with rear passengers
without first bolting the head restraints
in place.
English 