Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

EASE OF USE and COMFORT -> wipers for Your Peugeot Partner Van 2008-2014

Steering mounted controls  
In the AUTO position, the windscreen  
wipers operate automatically and  
adapt their speed to the intensity of the  
rainfall.  
When not in AUTO mode, for the  
other positions, refer to the manual  
windscreen wipers section.  
Activation  
Press the control downwards.  
Activation of the function is  
accompanied by a message in the  
screen.  
The automatic rain sensitive  
windscreen wipers function must  
be reactivated by pressing the stalk  
downwards, if the ignition has been  
switched off for more than one minute.  
Deactivation / Switching off  
Place the windscreen wipers stalk in  
position I, 1 or 2. Deactivation of the  
function is accompanied by a message  
in the screen.  
In the event of malfunction of the  
automatic windscreen wipers, the  
windscreen wipers will operate in  
intermittent mode.  
Whenever the ignition has been  
switched off for more than one minute,  
with the windscreen wiper stalk in  
position 2, 1 or I, the stalk must be  
reactivated:  
Manual windscreen wipers  
2 Fast wipe (heavy rain).  
1 Normal wipe (moderate rain).  
l Intermittent wipe.  
0 Off.  
È Single wipe  
(press downwards).  
-
-
move the stalk to any position,  
then move it back to the required  
position.  
Contact a PEUGEOT dealer or a  
qualied workshop to have the system  
checked.  
In the Intermittent position, the wiping  
speed is in proportion to the vehicle  
speed.  
When using an automatic car  
wash, switch off the ignition to  
avoid triggering the automatic  
wiping.  
Automatic rain sensitive windscreen wipers  
Do not cover the rain sensor,  
located in the centre of the  
windscreen, behind the mirror.  
In winter, it is advisable to wait for the  
windscreen to completely clear of ice  
before operating automatic wipe.  
3
Steering mounted controls  
Wash-wipe and headlamp wash  
Pull the stalk towards you, the wash-  
wipe is accompanied by a timed sweep  
of the wipers.  
The headlamp wash is linked with the  
wash-wipe, it is triggered if the dipped  
headlamps are on.  
To top up the levels, refer to the  
"Levels" section of chapter 6.  
Special position of the  
windscreen wipers  
In the minute following switching  
off of the ignition, any action on  
the stalk positions the wipers  
against the windscreen uprights.  
This action enables you to position  
the wiper blades for winter parking,  
cleaning or replacement.  
Rear wiper  
Rear screenwash  
Turn the ring to the rst  
position.  
Turn the ring past the rst  
position: the windscreen  
wash then the windscreen  
wiper operate for a xed  
time.  
Refer to the "Changing a  
windscreen wiper blade" section  
of chapter 7.  
To park the wipers in their normal  
position after this has been done,  
switch on the ignition and move the  
stalk.  
In winter, in the event of a  
considerable amount of snow or  
ice, switch on the heated rear  
screen. Once the screen is clear is  
complete, remove the snow or ice  
which has accumulated on the rear  
wiper blade. You can then operate the  
rear windscreen wiper.