Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

EASE OF USE and COMFORT -> Lighting control for Your Peugeot Partner Van 2008-2014

Steering mounted controls  
Lighting off  
Automatic illumination of  
headlamps  
Sidelamps  
Dipped beam (green)  
Main beam (blue)  
DIRECTION INDICATORS  
Direction indicators  
LIGHTING CONTROL  
Dipped beam/main beam change  
Pull the stalk fully towards you.  
Front and rear lighting  
Selection is by turning ring A.  
Left: downwards passing the  
point of resistance.  
Right: upwards passing the  
point of resistance.  
Lighting-on buzzer  
Checking by means of  
On switching of the ignition, all of the  
lamps turn off, except dipped beam if  
automatic guide-me-home lighting has  
been activated.  
To activate the lighting control, turn  
ring A to the lighting off position "0"  
then to the selection of your choice.  
On opening the driver's door, there  
is an audible warning if you have left  
the lighting on.  
the indicator lamps on the  
instrument panel is described in  
the "Instruments and controls"  
section of chapter 2.  
"Motorway" function  
Press the control up or down to ash  
the corresponding direction indicator  
three times.  
Steering mounted controls  
If the user does not operate any  
equipment for 30 minutes, the  
Economy mode engages to avoid  
discharging the battery (see "Battery"  
in section 7). Electrical functions are  
put on standby and the battery warning  
lamp ashes.  
Do not forget to switch them off  
when they are no longer needed.  
Operation of the automatic illumination  
of headlamps switches off the rear  
foglamps, but the front foglamps  
remain on.  
Automatic illumination of headlamps  
The sidelamps  
and dipped beam  
headlamps switch  
on automatically if  
the light is poor, or  
during operation of the windscreen  
wipers. They switch off as soon as the  
light becomes bright enough or the  
windscreen wipers stop.  
Sidelamp operation is not affected by  
Economy mode.  
This function is not compatible with the  
daytime running lamps.  
Front and rear foglamps  
Rotate ring B forwards to switch on  
and rearwards to switch off. The status  
is conrmed by the warning lamps in  
the instrument panel.  
They operate with the sidelamps and  
dipped beam headlamps.  
In foggy weather or in snow,  
the sunshine sensor may detect  
sufcient light. As a consequence,  
the lighting will not come on  
automatically. If necessary, you must  
switch on the dipped beam headlamps  
manually.  
LED daytime running lamps  
On starting the vehicle, in daylight the  
LED daytime running lamps come on  
automatically.  
If the sidelamps and headlamps are  
switched on manually or automatically,  
the daytime running lamps go off.  
Do not cover the sunshine sensor  
located on the windscreen,  
behind the mirror. It is used for the  
automatic illumination of headlamps and  
for the automatic rain sensitive wipers.  
Programming  
Front foglamps (green,  
1st rotation of the ring  
forwards).  
For countries where exterior lighting by  
day is not a legal requirement, you can  
activate or deactivate the function via  
the conguration menu.  
Activation  
Turn the ring to the AUTO position.  
The activation of this function is  
accompanied by a message in the  
screen.  
Rear foglamps (amber,  
2nd rotation of the ring  
forwards).  
Deactivation  
To switch off the front and rear  
foglamps, turn the ring rearwards twice  
in succession.  
In clear weather or in rain, both day  
and night, rear foglamps dazzle and  
their use is prohibited.  
Turn the ring forwards or rearwards.  
The deactivation of this function is  
accompanied by a message in the  
screen.  
The function is deactivated temporarily  
when you use the manual lighting  
control stalk.  
3
Steering mounted controls  
If the sunshine sensor  
does not function correctly,  
the lighting comes on  
accompanied by the service  
warning lamp, an audible  
signal and a message in the screen.  
Contact a PEUGEOT dealer or a  
qualied workshop.  
Guide-me-home lighting  
Cornering lighting  
Keeping the dipped beam headlamps  
on temporarily with the ignition off,  
makes the driver's exit easier when the  
light is poor.  
With dipped or main beam headlamps,  
this function makes use of the beam  
from a front foglamp to illuminate the  
inside of a bend, when the vehicle  
speed is below 25 mph (approximately  
40 km/h) (urban driving, winding road,  
intersections, parking manouevres...).  
Manual operation  
HEADLAMP BEAM  
-
With the ignition off, "ash" the  
headlamps within one minute after  
switching off the ignition.  
Depending on the load in your vehicle,  
the beam setting must be adjusted.  
0 - No load.  
1 - Partial load.  
2 - Average load.  
3 - Maximum authorised load.  
Switching on  
This function starts:  
The guide-me-home lighting switches  
off automatically after a set time.  
-
when the corresponding direction  
indicator is switched on,  
or  
from a certain angle of rotation of  
the steering wheel.  
-
Automatic operation  
Switching off  
The system does not operate:  
Activate the function via the  
vehicle conguration menu.  
Initial setting is position 0.  
-
below a certain angle of rotation of  
the steering wheel,  
above 25 mph (40 km/h),  
-
-
when reverse gear is engaged,  
Refer to the "Screen menu map"  
section of chapter 9.  
Programming  
The system is activated or deactivated  
in the vehicle conguration menu.  
The system is activated by default.