Snow screen
6. REFITTING THE REPAIRED
WHEEL
The wheel is refitted as described in
step 5, not forgetting to refit the wheel
trim.
Refer to the "Identification
markings" section of chapter 8 to
locate the tyre label.
Refer to the "Instruments and
controls" section of chapter 2,
"Tyre under-inflation detection"
part, for recommendations after
changing a wheel fitted with a tyre
under-inflation detection sensor.
REMOVABLE SNOW SCREEN
FITTING
The spare wheel is not designed
to be used over long distances.
Have the tightening of the bolts
According to country, the removable
snow screen is installed on the lower
part of the front bumper to prevent the
accumulation of snow at the radiator
cooling fan.
Do not forget to remove the snow
screen when the exterior temperature
is higher than 10°C (no risk of snowfall)
and when towing.
-
-
Offer up the snow screen facing its
centring pin A on the front bumper.
Put it in place by pressing at each
clip B located in the four corners.
and the tyre pressure checked by
a PEUGEOT dealer or a qualified
workshop as soon as possible. Have
the original wheel repaired and refitted
by a PEUGEOT dealer or a qualified
workshop as soon as possible.
REMOVAL
-
-
Pass a screwdriver into the hole
located near each of the clips.
Use the screwdriver as a lever to
unclip the four clips B in turn.
7
English 