COMING OUT OF ECONOMY MOdE
These functions are reactivated automatically next time the vehicle is
started.
ENERGY ECONOMY MODE
System which manages the duration of use of certain functions to
conserve a sufficient level of charge in the battery.
To resume the use of these functions immediately, start the engine and
let it run for at least 5 minutes.
After the engine has stopped, you can still use functions such as
the audio and telematics system, windscreen wipers, dipped beam
headlamps, courtesy lamps, etc. for a maximum combined duration of
thirty minutes.
Observe this minimum period of engine running to maintain the correct
level of charge in the battery.
Do not repeatedly restart of the engine to restore immediate use of
systems.
This period may be reduced considerably if the battery is not fully
charged.
A flat battery prevents the engine from starting (refer to the "12 V
battery" section).
GOING INTO TO ECONOMY MOdE
Once this period has elapsed, a message appears in the multifunction
screen indicating that the vehicle has gone into economy mode and the
active functions are put on standby.
LOAD REDUCTION MODE
System which manages the use of certain functions according to the
level of charge remaining in the battery.
If a telephone call is being made at this time, it will be maintained
for 5 minutes with the hands-free kit of your PEUGEOT Connect
Sound (RD5) or PEUGEOT Connect Navigation (RT6).
When the vehicle is being driven, the load reduction function temporarily
deactivates certain functions, such as the air conditioning, the heated
rear screen...
The deactivated functions are reactivated automatically as soon as
conditions permit.
164
English