In the event of a breakdown
Changing a fuse
Before changing a fuse:
Changing a fuse
Access to the tool kit
F the cause of the failure must be identified
and rectified,
Tweezers
F all electrical consumers must be switched
off,
F the vehicle must be immobilised with the
ignition off,
F identify the faulty fuse using the existing
allocation tables and diagrams.
Replacement with a fuse not shown in
the allocation tables below may cause
a serious malfunction of your vehicle.
Contact a PEUGEOT dealer or a qualified
workshop.
To remove or fit a fuse, it is essential to:
F use the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
F always replace the failed fuse with a fuse
of the same rating (same colour); using
a different rating could cause faults (risk of
fire).
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a PEUGEOT dealer or a qualified
workshop.
If the fault recurs after replacing a fuse, have
the electrical system checked by a PEUGEOT
dealer or a qualified workshop.
The extraction tweezers are located behind the
fusebox cover.
PEUGEOT will not accept responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied and not recommended by
PEUGEOT and not installed in accordance
with its instructions, in particular when
the combined consumption of all of the
additional equipment connected exceeds
10 milliamperes.
F Unclip the cover by pulling at the top left,
then right.
F Disengage the cover completely.
F Take the tweezers from their housing.
8
Good
Failed
209
English 
