Driving -> Parking sensors for Your Peugeot Rifter 4 Door First Generation (2018-2023)

Driving  
After three first level alerts, the system triggers  
a new alert with the message "Take a break!",  
accompanied by a more pronounced audible  
signal.  
Clean the windscreen regularly,  
This function is a manoeuvring aid which  
particularly the area in front of the camera.  
The internal surface of the windscreen can  
also become misted around the camera.  
In humid and cold weather, demist the  
windscreen regularly.  
Do not allow snow to accumulate on the  
bonnet or roof of the vehicle as this could  
conceal the detection camera.  
cannot, in any circumstances, replace the  
need for vigilance on the part of the driver.  
The driver must remain attentive and stay  
in control of their vehicle.  
They must always check the vehicle's  
surroundings before undertaking  
a manoeuvre.  
In certain driving conditions (poor road  
surface or strong winds), the system may  
give alerts independent of the driver's  
level of vigilance.  
During the entire manoeuvre, the driver  
must ensure that the space remains clear.  
The following situations may interfere with  
the operation of the system or prevent it  
from working:  
Rear parking sensors  
Parking sensors  
The system is switched on by engaging reverse  
gear.  
This is confirmed by an audible signal.  
The system is switched off when you come out  
of reverse gear.  
-
poor visibility (inadequate lighting of  
the roadway, falling snow, heavy rain,  
dense fog, etc.),  
dazzle (headlamps of an oncoming  
vehicle, low sun, reflections on a damp  
road, leaving a tunnel, alternating  
shade and light, etc.),  
-
6
-
-
windscreen area located in front of the  
camera dirty, misted up, frost-covered,  
snow-covered, damaged or covered by  
a sticker,  
lane markings absent, worn, hidden  
(snow, mud) or multiple (roadworks,  
etc.),  
Audible assistance  
-
-
close to the vehicle ahead (lane  
markings not detected),  
roads that are narrow, winding, etc.  
Using sensors located in the bumper, this  
function warns of the proximity of obstacles  
(e.g. pedestrian, vehicle, tree, barrier) entering  
their field of detection.  
The function signals the presence of obstacles  
present both within the sensors' detection  
zone and in the vehicle path defined by the  
orientation of the steering wheel.  
165