In the event of a breakdown
Do not drive more than 125 miles (200 km)
with the repaired tyre; see a PEUGEOT
dealer or a qualified workshop to change
the tyre.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on Under-inflation
detection, refer to the corresponding
section.
F Screw the pipe onto the valve and tighten
F Start the compressor by placing the switch
at position "I" and adjust the pressure to the
value shown on the vehicle's tyre pressure
label. To deflate: press the black button
located on the compressor pipe, near the
valve connection.
firmly.
F Check that the compressor switch is at the
"O" position.
F Uncoil fully the electric cable, stowed under
the compressor.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Switch on the ignition.
Procedure for changing a damaged wheel with
the spare wheel using the tools provided with
the vehicle.
If a pressure of 2 bars is not reached after
7 minutes, this indicates that the tyre is not
repairable; contact a PEUGEOT dealer or
a qualified workshop for assistance.
Only the 12 V socket located at the front
of the vehicle can be used to power the
compressor.
For more information on the Tool kit, refer
to the corresponding section.
8
F Park the vehicle without obstructing any traffic
and apply the parking brake.
F Once the correct pressure is reached, put
the switch to the "O" position.
F Remove the kit then stow it.
F Follow the safety instructions (hazard warning
lamps, warning triangle, wearing high visibility
vest, etc.) according to the legislation in force
in the country where you are driving.
F Switch off the ignition.
The tyre inflation pressures are given on
this label.
199
English