In the event of a breakdown -> Towing for Your Peugeot Rifter 4 Door First Generation (2018-2023)

In the event of a breakdown  
Reconnecting the (+) terminal  
Referring to the corresponding section, you  
must reinitialise certain systems yourself, such  
as:  
F switch off all electrical consumers (audio  
system, wipers, lighting, etc.).  
F switch off the ignition and wait for four  
minutes.  
-
the remote control or electronic key  
(depending on version),  
the electric windows,  
At the battery, detach the (+) terminal only.  
-
-
-
-
the electric doors,  
the date and time,  
the radio preset stations.  
Quick-release terminal clamp  
Disconnecting the (+) terminal  
The Stop & Start system may not be  
operational during the trip following the  
next engine start.  
In this case, the system will only be  
available again after a continuous  
period of immobilisation of the vehicle,  
a period which depends on the exterior  
temperature and the state of charge of the  
battery (up to about 8 hours).  
F Raise the lever A fully.  
F Replace the open clamp B on the (+)  
terminal.  
F Push the clamp B fully down.  
F Lower the lever A to lock the clamp B.  
Do not force the lever as locking will be  
impossible if the clamp is not positioned  
correctly; start the procedure again.  
F Raise the lever A fully to release the clamp  
Towing  
Procedure for having your vehicle towed or  
for towing another vehicle using a removable  
mechanical device.  
B.  
Following reconnection of the  
battery  
F Remove the clamp B by lifting it off.  
Following reconnection of the battery, turn on  
the ignition and wait 1 minute before starting  
the engine, in order to enable the electronic  
systems to initialise.  
Access to the eye  
However, if minor problems persist following  
this operation, contact a PEUGEOT dealer or  
a qualified workshop.  
For more information on the Tool kit, refer  
to the corresponding section.  
214