2016-2026 Peugeot Traveller Van Driving -> Reversing camera / 180? vision User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Reversing camera / 180? vision for Your Peugeot Traveller Van First Generation (2016-2026)

Driving  
Reversing camera with display in the interior mirror  
opening the tailgate or rear door  
(depending on equipment) can interfere  
with the display.  
If a side door is open, allow for the  
space it occupies.  
Some deformation of the image is  
normal.  
The image is displayed in the interior mirror.  
Check the cleanliness of the camera  
lens regularly.  
Clean the reversing camera regularly  
using a soft, dry cloth.  
The visual aid reversing camera is activated  
automatically when reverse gear is engaged.  
High pressure jet washing (if muddy,  
for example)  
When washing your vehicle, do not  
place the tip of the lance within 30 cm  
of the camera as there is a risk of  
damaging it.  
The function may be completed with parking  
sensors.  
The reversing camera cannot in any  
circumstances be a substitute for  
vigilance on the part of the driver.  
The blue lines represent the width of your  
vehicle including the mirrors.  
The red line represents a distance of 30 cm  
from the rear bumper and the thin blue lines  
respectively 1 m (A) and 2 m (B).  
254  
Driving  
using the rear camera, the system records the  
vehicle's surroundings during a manoeuvre.  
An image from above your vehicle in its close  
surroundings is reconstructed (represented  
between the blue brackets) in real time and as  
the manoeuvre progresses.  
180° rear vision  
This representation facilitates the alignment of  
your vehicle when parking and allows you to  
see all of the obstacles close to the vehicle.  
This reconstructed view is automatically erased  
if the vehicle remains stationary for too long.  
The system displays the contextual view  
(left-hand part) as well as the view from above  
the vehicle in its close surroundings.  
By default, automatic mode is activated.  
In this mode, the system chooses the best view  
to display (standard or zoom) according to the  
information received from the parking sensors.  
The 180° view is only available through the  
menus.  
This system is a visual aid and cannot  
in any circumstances replace the need  
for vigilance on the part of the driver.  
The images provided by the cameras  
may appear distorted by the  
This system allows the near surroundings of the  
vehicle to be viewed in the display screen using  
cameras located at the rear of the vehicle. The  
parking sensors in the rear and/or front bumper  
complete the information on the view from  
above the vehicle (right-hand part).  
In addition to the view from above the vehicle  
(right-hand part) several types of view can be  
displayed (left-hand part):  
surroundings (exterior conditions,  
driving mode, ...).  
6
The presence of areas in shadow, bright  
sunlight, or poor lighting conditions  
may make the image dark and reduce  
contrast.  
Principle of image  
reconstruction  
-
-
-
standard rear view,  
180° rear view,  
reconstructed zoom rear view.  
The display disappears above  
approximately 6 mph (10 km/h).  
The system is automatically deactivated  
about 7 seconds after coming out of  
reverse or on opening a door or the  
boot.  
255  
Driving  
"180° view"  
"Zoom view" (reconstructed)  
Rear views  
engage reverse gear to activate the camera,  
located on the tailgate or rear door.  
"Standard view"  
180° view makes it possible to reverse out of  
a parking space while being able to see the  
arrival of vehicles, pedestrians or cyclists.  
This view is not recommended for carrying out  
a complete manoeuvre.  
The camera records the surroundings during a  
manoeuvre in order to create a reconstruction  
of the view from above the rear of the vehicle in  
its close surroundings, allowing the vehicle to  
be manoeuvred among the obstacles nearby.  
This view is available with AuTo view or by  
selecting of the view in the change view menu.  
It is made up of the following:  
The area to the rear of your vehicle is displayed  
in the screen.  
The blue outline represents the width of your  
vehicle (with mirrors): its orientation depends  
on the position of the steering wheel.  
The red line represents a distance of 30 cm  
from the rear bumper and the two blue lines,  
1 m and 2 m respectively.  
The rear parking sensors also  
provide information on the vehicle's  
surroundings.  
obstacles may appear further away  
than they are in reality.  
It is important to check the side views  
using the mirrors during the manoeuvre.  
256  
Driving  
A message is displayed advising you to check  
your vehicle's surroundings before starting the  
manoeuvre.  
on display of the sub-menu, select one of the  
four views:  
"AUTO mode"  
"Standard view".  
"180° view".  
Activation  
Activation is automatic on engaging reverse.  
The function is displayed in the touch screen.  
To close the window displayed, press on the  
red cross at the top left of the screen.  
"Zoom view".  
"AuTo mode".  
This mode is activated by default.  
using sensors in the rear bumper, the  
automatic view allows a change from the rear  
view to the view from above as an obstacle is  
approached during a manoeuvre.  
Check the cleanliness of the camera  
lenses regularly.  
Periodically clean the reversing camera  
with a soft dry cloth.  
Quick start mode  
6
High pressure jet wash (if muddy, for  
example)  
When washing your vehicle, do not  
place the tip of the lance within 30 cm of  
the camera lenses, as otherwise there  
is a risk of damaging them.  
You can choose the display mode at any time  
by pressing on this area.  
The system is automatically deactivated  
when towing a trailer or carrying a  
bicycle on the towbar (vehicle fitted with  
a towbar installed as recommended by  
the manufacturer).  
This mode displays, as quickly as possible, the  
contextual view (left-hand part) and the view  
from above the vehicle.  
257  

Related Topics

Popular Owner Manuals