Get Lighting and visibility Guide for Peugeot Traveller Van First Generation (2016-2026)

Lighting and visibility

Mirrors

Door mirrors

Electric folding

Electric unfolding

If your vehicle is fitted with this function, the

mirrors can be folded electrically from the inside,

with the vehicle parked and the ignition on:

The electric unfolding of the mirrors is possible

with the remote control or the key on unlocking

the vehicle, unless folding was selected using

switch A. In this case, pull the switch rearwards

from the centre position again.

Electric adjustments

F

Place switch A in the

centre position.

Pull switch A rearwards.

4

From the outside, lock the vehicle using the

remote control or the key.

The folding / unfolding on locking /

unlocking can be deactivated. Contact

a PeugeoT dealer or a qualified

workshop.

It is possible to unfold the mirrors

manually if necessary.

F

Move switch A to the right or to the left to

select the corresponding mirror.

F

Move knob B in all four directions to adjust.

Return switch A to the centre position.

141

Lighting and visibility

Heated mirrors

For more information on Rear

screen demist - defrost, refer to the

corresponding section.

As a safety measure, the mirrors should

be adjusted to reduce the blind spots.

The objects observed are, in reality,

closer than they appear.

Take this into account in order to

correctly judge the distance of vehicles

approaching from behind.

If your vehicle has heated door mirrors:

F

Press the heated rear window

button.

or

F

Press the heated mirror button.

142

Lighting and visibility

Rear view mirror

equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to

Surveillance mirror

the driver caused by the sun, headlamps from other vehicles...

Manual model

Automatic "electrochrome"

model

4

This mirror, placed on top of the central mirror,

enables the driver or front passenger to

observe all the rear seats.

Fitted on its own ball joint, its manual

adjustment is simple and provides a view of the

rear interior of the vehicle.

Adjustment

This system automatically and progressively

changes between the day and night uses by

means of a sensor, which measures the light

from the rear of the vehicle.

F

Adjust the mirror so that the glass is

directed correctly in the "day" position.

It can also be adjusted for improved visibility

during manoeuvres or when overtaking.

Day / night position

F

Pull the lever to change to the "night" anti-

dazzle position.

In order to ensure optimum visibility

during your manoeuvres, the mirror

lightens automatically when reverse

gear is engaged.

F

Push the lever to change to the normal

"day" position.

143

Lighting and visibility

Lighting control stalk

Main lighting selection ring

Dipping the headlamps

Lighting off (ignition off) / Front daytime

running lamps (engine running).

Turn the ring to align the desired symbol with

the marking.

Automatic illumination of headlamps.

Model without AUTO lighting

Sidelamps only.

Dipped or main beam headlamps.

Pull the stalk to switch between dipped and

main beam headlamps.

operation of the selected lighting is

confirmed by the illumination of the

corresponding indicator lamp.

In the lighting off and sidelamps modes, the

driver can switch on the main beam headlamps

temporarily ("headlamp flash") by maintaining a

pull on the stalk.

Model with AUTO lighting

In some weather conditions (e.g. low

temperature or humidity), the presence

of misting on the internal surface of the

glass of the headlamps and rear lamps

is normal; it disappears after the lamps

have been on for a few minutes.

144

Lighting and visibility

Foglamp ring

4

Rear foglamp only

Front and rear foglamps

It operates with the sidelamps on.

To switch it on, turn the ring forwards.

When the lighting is switched off automatically

(with AuTo model), the foglamp and the dipped

beam headlamps will remain on.

They operate with dipped beam headlamps on,

in manual or auto mode.

When the headlamps switch off with automatic

illumination of headlamps (AuTo model)

or when the dipped beam headlamps are

switched off manually, the foglamps and

sidelamps remain on.

F

Rotate and release the ring:

F

forwards once to switch on the front

foglamps,

forwards again to switch on the rear

foglamps,

rearwards once to switch off the rear

foglamps,

rearwards again to switch off the front fog

lamps.

F

Turn the ring rearwards to switch off

the foglamps, the sidelamps will then

switch off.

F

To switch it off, turn the ring rearwards.

145

Lighting and visibility

Direction indicators

In good or rainy weather, both day

and night, the front foglamps and the

rear foglamps are prohibited. In these

situations, the power of their beams

may dazzle other drivers. They should

only be used in fog or snow.

In these weather conditions, it is your

responsibility to switch on the foglamps

and dipped headlamps manually as the

sunshine sensor may detect sufficient

light.

Lighting left on audible

signal

An audible signal when a front door

is opened warns the driver that the

vehicle's exterior lighting is on, with the

ignition off and in manual lighting mode.

In this case, switching off the lighting

stops the audible signal.

The lighting goes off when you switch

off the ignition, but you can always

switch it on again using the lighting

control stalk.

Do not forget to switch off the front

foglamps and the rear foglamps when

they are no longer needed.

F

Left: lower the lighting stalk, passing the

point of resistance.

Right: raise the lighting stalk, passing the

point of resistance.

Travelling abroad

If using your vehicle in a country that

drives on the other side of the road, the

headlamps must be adjusted to avoid

dazzling on-coming drivers.

Contact a PeugeoT dealer or a

qualified workshop.

Three ﬂashes of the direction

indicators

F

Press briefly upwards or downwards,

without going beyond the point of

resistance; the direction indicators will

flash 3 times.

146

Lighting and visibility

Deactivation

Front daytime running lamps Automatic illumination of

(light-emitting diodes)

F

Turn the ring to another position.

headlamps

Deactivation of the function is

When a low level of ambient light is detected

by a sunshine sensor, the number plate lamps,

sidelamps and dipped beam headlamps are

switched on automatically, without any action

on the part of the driver. They can also come

on if rain is detected, at the same time as

automatic operation of the windscreen wipers.

As soon as the brightness returns to a

sufficient level or after the windscreen wipers

are switched off, the lamps are switched off

automatically.

accompanied by the display of a message.

Operating fault

In the event of a malfunction of the

sunshine sensor, the lighting comes

on; this warning lamp is displayed

in the instrument panel accompanied by an

audible signal and/or a message.

4

Contact a PeugeoT dealer or a qualified

workshop.

In fog or snow, the sunshine sensor

may detect sufficient light. In this

case, the lighting will not come on

automatically.

If fitted to your vehicle, they come on

automatically when the engine is started, when

the lighting control stalk is in position "0" or

"AUTO".

Activation

Do not cover the sunshine sensor,

coupled with the rain sensor and

located in the top of the windscreen

behind the rear view mirror; the

associated functions would no longer

be controlled.

F

Turn the ring to the "AUTO" position. The

activation of the function is accompanied

by the display of a message.

147

Lighting and visibility

With the audio system

Manual guide-me-home

lighting

Automatic guide-me-home

lighting

Temporarily keeping the dipped beam

headlamps on after the vehicle's ignition has

been switched off makes the driver's exit easier

when the light is poor.

When the automatic illumination of headlamps

function is activated, under low ambient

light the dipped beam headlamps come on

automatically when the ignition is switched off.

In the "Personalisation-configuration"

menu, activate/deactivate "Follow-me-home

headlamps".

Switching on

Programming

The activation, deactivation and selection of

period the guide-me-home lighting is kept on

can be set.

With the touch screen

In the vehicle settings menu, activate/

deactivate "Guide-me-home lighting".

F

With the ignition off, "flash" the headlamps

using the lighting stalk.

A further "headlamp flash" switches the

function off.

Switching off

The manual guide-me-home lighting switches

off automatically after a set time.

148

Lighting and visibility

Programming

With the touch screen

Exterior welcome lighting

The remote switching on of the lighting makes

your approach to the vehicle easier in poor

light. It is activated when the lighting control

is in the "AUTO" position and the level of light

detected by the sunshine sensor is low.

The activation, deactivation and choice of

welcome lighting duration can be set.

In the vehicle settings menu, activate/

deactivate "Welcome lighting".

With the audio system

Switching on

In the "Personalisation-configuration" menu,

activate/deactivate "Welcome lighting".

4

F

Press the open padlock on the

remote control or one of the front

door handles with Keyless entry

and Starting.

The dipped beam headlamps and sidelamps

come on; your vehicle is also unlocked.

Switching off

The exterior welcome lighting switches off

automatically after a set time, when the ignition

is switched on or on locking the vehicle.

149

Lighting and visibility

Programming

Cornering lighting

The system is activated or deactivated in the

vehicle configuration menu.

The system is activated by default.

With the audio system

In the "Personalisation-configuration" menu,

activate/deactivate "Driving lighting".

With dipped or main beams, this function

makes use of the beam from a front foglamp

to illuminate the inside of a bend, when the

vehicle speed is below 25 mph (40 km/h)

(urban driving, winding road, intersections,

parking manoeuvres...).

With cornering lighting

Switching on

The system operates:

-

when the corresponding direction indicator

is switched on,

With the touch screen

or

-

from a certain angle of rotation of the

steering wheel.

In the vehicle settings menu, activate/

deactivate "Driving lighting".

Switching off

The system does not operate:

-

below a certain angle of rotation of the

steering wheel,

-

above 25 mph (40 km/h),

when reverse gear is engaged.

Without cornering lighting

150

Lighting and visibility

Automatic headlamp dipping

System which automatically changes between

dipped and main beam according to the

ambient light level and the driving conditions,

using a camera located at the top of the

windscreen

Pause

The driver can intervene at any time if the

situation requires a change in the state of the

headlamps.

F

Flashing the headlamps

again pauses the function

and the lighting system

changes to "automatic

illumination of headlamps".

4

This automatic headlamp dipping

system is a driving aid.

The driver remains responsible for the

vehicle's lighting and for adapting its

settings to the levels of brightness and

visibility and the traffic conditions.

Activation / deactivation

The driver can intervene at any time

if the circumstances dictate by pulling

on the lighting control stalk to switch

between main and dipped beam.

F

Put the lighting control stalk ring in the

"AuTo" or dipped/main beam position.

F

Flash the headlamps

(going beyond the stiff

point) to activate the

function.

The system will be operational as soon

as you have exceeded 15 mph (25 km/h).

If the speed drops below 9 mph

(15 km/h), the system no longer

operates.

Flashing the headlamps does not

deactivate the system.

The state of the system stays

in memory when the ignition is

switched off.

151

Lighting and visibility

With the audio system

The system may suffer interference or

not work correctly:

-

under conditions of poor visibility

(for example, snowfall, heavy rain

or thick fog, ...),

if the windscreen is dirty, misted or

obscured (by a sticker, ...) in front of

the camera,

if the vehicle is facing highly

reflective signs.

If the fog is too dense, the system is

automatically deactivated.

To deactivate the system:

F

Press the button, its indicator

lamp comes on, the system is

deactivated.

The system is not able to detect:

-

road users that do not have their

own lighting, such as pedestrians,

road users whose lighting is

obscured, such as vehicles running

behind a safety barrier (on a

motorway, for example),

To activate the system:

Press this button, the indicator

-

F

lamp goes off, the system is

activated

-

road users at the top or bottom of

a steep slope, on twisty roads, on

crossroads.

With the touch screen

In the Driving menu, activate/deactivate

"Automatic headlamp dip".

152

Lighting and visibility

Switching on

Interior mood

lighting

Manual headlamp

beam height adjustment

At night, the front roof lighting and panoramic

roof lighting (if fitted to your vehicle) come

on automatically when the sidelamps are

switched on.

The interior mood lighting switches off

automatically when the sidelamps are

switched off.

Programming

4

The activation, deactivation and brightness of

the mood lighting can be set.

To avoid causing a nuisance to other road

users, the beams of the halogen headlamps

should be adjusted according to the load in the

vehicle.

With the audio system

0 - 1 or 2 people in the front seats.

1 - 5 people.

2 - 6 to 9 people.

In the "Personalisation-configuration" menu,

activate/deactivate "Ambiance lighting".

3 - Driver + maximum authorised loads.

With the touch screen

The dimmed passenger compartment lighting

improves visibility in the vehicle when the light

is poor.

The initial setting is position "0".

In the vehicle settings menu, activate/

deactivate "Mood lighting".

153

Lighting and visibility

Windscreen wipers

Wiping speed control stalk: raise or lower the

stalk to the desired position.

Wiper control stalk

Programming

Manual controls

The wipers are controlled directly by the driver.

Your vehicle may also include some functions

that can be configured:

Fast wipe (heavy rain).

-

automatic rain sensitive windscreen wipers,

rear wiping on engaging reverse gear.

Normal wipe (moderate rain).

Model with manual wiping

(intermittent)

Intermittent wipe (proportional to the

speed of the vehicle).

Park.

In wintry conditions, remove snow, ice

or frost present on the windscreen,

around the wiper arms and blades and

the windscreen seal, before operating

the wipers.

Single wipe (press downwards or pull

the stalk briefly towards you, then

release).

or

Automatic wiping (press down,

then release).

Single wipe (pull the stalk briefly

towards you).

Do not operate the wipers on a dry

windscreen. under extremely hot or

cold conditions, ensure that the wiper

blades are not stuck to the windscreen

before operating the wipers.

Model with AUTO wiping

154

Lighting and visibility

Rear wiper

Automatic rain sensitive windscreen wipers

The windscreen wipers operate automatically, without any action on the part of the driver, if rain is

detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.

Switching on

The automatic rain sensitive windscreen

wipers must be reactivated by pushing

the control stalk downwards, if the

ignition has been off for more than

one minute.

4

Operating fault

If a fault occurs with the automatic rain

sensitive wipers, the wipers will operate in

intermittent mode.

Park.

Have it checked by PeugeoT dealer or a

qualified workshop.

Intermittent wipe.

Briefly push the control stalk downwards.

A wiping cycle confirms that the

instruction has been accepted.

This warning lamp comes on in the

instrument panel and a message is

displayed.

Do not cover the rain sensor, linked with

Wash-wipe (set duration).

the sunshine sensor and located in the

top of the windscreen behind the rear view

mirror.

Switch off the automatic rain sensitive

wipers when using an automatic car wash.

In winter, it is advisable to wait until the

windscreen is completely clear of ice

before activating the automatic rain

sensitive wipers.

Switching off

Briefly push the control stalk

downwards again, or place the control

stalk in another position (Int, 1 or 2).

This warning lamp goes off in the

instrument panel and a message is

displayed.

155

Lighting and visibility

Reverse gear

Screenwash/headlamp wash

level low

Windscreen and headlamp

wash

When reverse gear is engaged, the rear wiper

will come into operation automatically if the

windscreen wipers are operating.

In the case of vehicles fitted with headlamp

washers, when the fluid reservoir low level

is reached this warning lamp comes on in

the instrument panel, accompanied by an

audible signal and a message.

Activation / Deactivation

Activation or deactivation of the function is

done in the vehicle configuration menu.

The warning lamp comes on when the ignition

is switched on, or every time the stalk is

operated, until the reservoir is refilled.

Next time you stop, refill the screenwash /

headlamp wash reservoir.

This function is activated by default.

If a significant accumulation of snow or

ice is present, or when using a bicycle

carrier on the boot, deactivate the

automatic rear wiper.

F

Pull the windscreen wiper stalk towards

you. The screenwash then the wipers

operate for a fixed period.

With the audio system

The headlamp wash is only activated if the

dipped headlamps are on and the vehicle is

moving.

With daytime running lamps, to activate the

headlamp wash, position the lighting stalk in

the dipped beam position.

In the "Personalisation-configuration" menu,

activate/deactivate "Rear wipe in reverse

gear".

With the touch screen

on vehicles fitted with automatic

air conditioning, any action on the

windscreen wash control results in

temporary closing of the air intake to

avoid odours inside the passenger

compartment.

In the vehicle settings menu, activate/

deactivate "Rear wiper in reverse".

156

Lighting and visibility

F

Any action on the wiper stalk within one

minute after switching off the ignition

places the wiper blades vertically on the

screen.

To park the wiper blades again, switch on

the ignition and operate the wiper stalk.

Switching on

Heated windscreen and

F

With the engine running, press

washer jets*

This function heats the windscreen and washer

jets under cold conditions.

this button; its indicator lamp

comes on.

The period of operation depends on the

ambient temperature.

Pressing this button again switches the function

off; its indicator lamp goes off.

To maintain the effectiveness of the

wiper blades, it is advisable to:

Special position of the

windscreen wipers

4

-

handle them with care,

clean them regularly using soapy

water,

-

avoid using them to retain

cardboard on the windscreen,

replace them at the first signs of

wear.

This position permits release of the windscreen

wiper blades.

It is used for cleaning or replacement of the

wiper blades. It can also be useful, in winter, to

release the wiper blades from the windscreen.

In area 1, the heating frees the wiper blades

when they are stuck by snow or ice.

In area 2, the heating improves visibility by

avoiding the accumulation of snow when the

wipers are operating.

* Depending on the country of sale.

157

Lighting and visibility for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals