Lighting and visibility
Reverse gear
Screenwash/headlamp wash
level low
Windscreen and headlamp
wash
When reverse gear is engaged, the rear wiper
will come into operation automatically if the
windscreen wipers are operating.
In the case of vehicles fitted with headlamp
washers, when the fluid reservoir low level
is reached this warning lamp comes on in
the instrument panel, accompanied by an
audible signal and a message.
Activation / Deactivation
Activation or deactivation of the function is
done in the vehicle configuration menu.
The warning lamp comes on when the ignition
is switched on, or every time the stalk is
operated, until the reservoir is refilled.
Next time you stop, refill the screenwash /
headlamp wash reservoir.
This function is activated by default.
If a significant accumulation of snow or
ice is present, or when using a bicycle
carrier on the boot, deactivate the
automatic rear wiper.
F
Pull the windscreen wiper stalk towards
you. The screenwash then the wipers
operate for a fixed period.
With the audio system
The headlamp wash is only activated if the
dipped headlamps are on and the vehicle is
moving.
With daytime running lamps, to activate the
headlamp wash, position the lighting stalk in
the dipped beam position.
In the "Personalisation-configuration" menu,
activate/deactivate "Rear wipe in reverse
gear".
With the touch screen
on vehicles fitted with automatic
air conditioning, any action on the
windscreen wash control results in
temporary closing of the air intake to
avoid odours inside the passenger
compartment.
In the vehicle settings menu, activate/
deactivate "Rear wiper in reverse".
156
English 
