2016-2026 Peugeot Traveller Van Lighting and visibility -> Automatic illumination of headlamps User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lighting and visibility -> Automatic illumination of headlamps for Your Peugeot Traveller Van First Generation (2016-2026)

Lighting and visibility  
Deactivation  
Front daytime running lamps Automatic illumination of  
(light-emitting diodes)  
F
Turn the ring to another position.  
headlamps  
Deactivation of the function is  
When a low level of ambient light is detected  
by a sunshine sensor, the number plate lamps,  
sidelamps and dipped beam headlamps are  
switched on automatically, without any action  
on the part of the driver. They can also come  
on if rain is detected, at the same time as  
automatic operation of the windscreen wipers.  
As soon as the brightness returns to a  
sufficient level or after the windscreen wipers  
are switched off, the lamps are switched off  
automatically.  
accompanied by the display of a message.  
Operating fault  
In the event of a malfunction of the  
sunshine sensor, the lighting comes  
on; this warning lamp is displayed  
in the instrument panel accompanied by an  
audible signal and/or a message.  
4
Contact a PeugeoT dealer or a qualified  
workshop.  
In fog or snow, the sunshine sensor  
may detect sufficient light. In this  
case, the lighting will not come on  
automatically.  
If fitted to your vehicle, they come on  
automatically when the engine is started, when  
the lighting control stalk is in position "0" or  
"AUTO".  
Activation  
Do not cover the sunshine sensor,  
coupled with the rain sensor and  
located in the top of the windscreen  
behind the rear view mirror; the  
associated functions would no longer  
be controlled.  
F
Turn the ring to the "AUTO" position. The  
activation of the function is accompanied  
by the display of a message.  
147  
Lighting and visibility  
With the audio system  
Manual guide-me-home  
lighting  
Automatic guide-me-home  
lighting  
Temporarily keeping the dipped beam  
headlamps on after the vehicle's ignition has  
been switched off makes the driver's exit easier  
when the light is poor.  
When the automatic illumination of headlamps  
function is activated, under low ambient  
light the dipped beam headlamps come on  
automatically when the ignition is switched off.  
In the "Personalisation-configuration"  
menu, activate/deactivate "Follow-me-home  
headlamps".  
Switching on  
Programming  
The activation, deactivation and selection of  
period the guide-me-home lighting is kept on  
can be set.  
With the touch screen  
In the vehicle settings menu, activate/  
deactivate "Guide-me-home lighting".  
F
F
With the ignition off, "flash" the headlamps  
using the lighting stalk.  
A further "headlamp flash" switches the  
function off.  
Switching off  
The manual guide-me-home lighting switches  
off automatically after a set time.  
148  

Related Topics

Popular Owner Manuals