2011-2017 Porsche Cayenne SUV Driving and Driving Safety -> Cruise Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving and Driving Safety -> Cruise Control for Your Porsche Cayenne SUV Second Generation (2011-2017)

158 Driving and Driving Safety
A - Switch cruise control on/off
1 - Set/increase desired speed
2 - Reduce desired speed
3 - Interrupt (OFF)
4 - Return to set speed (RESUME)
Cruise Control
Cruise control maintains any selected speed
between approx. 20–150 mph (30–240 km/h)
without you having to use the accelerator.
Cruise control is operated using the control stalk
at the bottom left of the steering wheel.
Vehicles with Tiptronic S
Downshifts are carried out to help maintain the
pre-selected speed (especially when driving
downhill).
If the current traffic situation does not allow you to
drive safely at a constant speed and with sufficient
distance to the vehicle in front, using the cruise
control can cause accidents.
f Do not use the cruise control in heavy traffic,
in city traffic, on twisting roads or under
unfavorable road conditions (e.g. wintry or wet
conditions, varying road surfaces).
f Observe all local and national speed limits.
f Do not reach through the steering-wheel
spokes while driving.
Switching cruise control readiness on
f Press button A on the control stalk.
Maintaining and storing speed
1. Accelerate or decelerate to the desired speed
using the accelerator pedal.
2. Push the control stalk on the steering wheel
forward (position 1).
The current driving speed is now stored as the
desired speed, which will be maintained
automatically.
Accelerating (e.g. to overtake)
Variant 1
f Increase the speed as usual with the
accelerator pedal.
When you ease off the accelerator, the
previously stored value is set again.
Variant 2
f Push the control stalk on the steering wheel
forward (position 1).
The desired speed is increased in steps
of 1 mph (1 km/h).
or
Press the control stalk on the steering wheel
forward and keep it pressed (position 1).
The desired speed is increased in steps
of 5 mph (10 km/h).
The new desired speed is displayed on the
multi-purpose display in the instrument panel.
Misuse of Cruise
Control
Cruise control readiness
The gray symbol on the multi-purpose
display of the instrument panel indicates
readiness.
WARNING
h
Desired speed
The desired speed that was stored is
displayed under the cruise control
symbol, which has now turned orange.
Driving and Driving Safety 159
Decelerating
f Briefly pull the control stalk on the steering
wheel towards the steering wheel (position 2).
The desired speed is decreased in steps
of 1 mph (1 km/h).
or
Pull the control stalk on the steering wheel
towards the steering wheel and keep it pulled
(position 2).
The desired speed is decreased in steps
of 5 mph (10 km/h).
The new desired speed is displayed on the
multi-purpose display in the instrument panel.
Vehicles with Tiptronic S
Downshifts are carried out to help maintain the
pre-selected speed (especially when driving
downhill).
Cayenne S and Cayenne Turbo only:
If the driving speed is more than 1 mph (1 km/h)
higher or lower than the set speed, the current
driving speed is set when you move the control
stalk to position 1 or 2 briefly.
Interrupting cruise control operation –
OFF
The speed driven before the interruption remains
stored in the memory and can be reactivated by
pressing the control stalk.
f Please see the chapter “RESUMING THE
STORED SPEED – RESUME” on page 159.
f Press the control stalk down (position 3).
or
Press the brake or clutch pedal or move the
Tiptronic selector lever to position N.
Cruise control operation is interrupted
automatically:
– If the set vehicle speed is exceeded by more
than approx. 16 mph (25 km/h) for longer
than 20 seconds.
– If the actual vehicle speed falls below the set
vehicle speed by approx. 37 mph (60 km/h)
for longer than 60 seconds (e.g. gradients).
– If Porsche Stability Management (PSM)
intervenes for longer than 0.5 seconds.
Resuming the stored speed – RESUME
f Press the control stalk up (position 4).
Cruise control accelerates/decelerates the
vehicle to the stored speed.
Information
The stored speed should only be recalled if traffic
and road conditions are conducive to driving at
that speed.
Switching cruise control readiness off
f Press button A on the control stalk.
The memory is cleared and the readiness
symbol disappears.
The stored desired speed is cleared when the
ignition is switched off when the vehicle is parked.
Information
On upward or downward slopes, the set speed
cannot always be maintained by cruise control.
f To obtain sufficient engine braking or a better
engine-speed range, you therefore have to
change down to a lower gear.

Related Topics

Popular Owner Manuals