
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Lights
150
or deactivated. The beam in the relevant area in front
of the vehicle is low, the rest remains high. This en-
sures that the environment is lit without dazzling
other road users.
Dynamic high beam is switched on or off at speeds
between 30 km/h (20 mph) and
60 km/h (37 mph)), depending on the navigation
data. Full high beam illumination is switched to dip-
ped beam when the camera detects street lights.
The dynamic high beams can be activated or deac-
tivated in the central display:
e
e Setting eVehicle eLight and visibility
e Exterior lights e Full beam adaptation on
vehicle recognition
Information
To avoid impairing the detection performance:
e Do not cover the camera area on the interior
mirror with objects (e.g. stickers).
e The camera must always be kept free of dirt, ice
and snow.
Passing lights
bb No oncoming traffic.
bb Vehicle ahead.
e Operate the direction indicator for overtaking
while driving.
The area next to the vehicle ahead is illuminated
brightly. This makes it easier to see the road
ahead.
Passing lights are automatically deactivated
again when the turn signal is deactivated or if
oncoming traffic is detected.
Encounter lights
bb No vehicle ahead.
bb Oncoming traffic with detected headlights.
The light distribution is briefly changed so that the
lane being driven on is illuminated brightly. This
draws the direction of vision onto the lane being
driven on. The driver is less dazzled by the oncoming
traffic.
Signage glare reduction
bb Dynamic high beam is switched on.
The glare of reflective traffic signs and other signage
can – particularly when driving with high beams –
cause the driver to be dazzled.
The signage glare reduction briefly dims individual
LED segments of the vehicle's low or high beam
headlights in a targeted manner. The driver is
dazzled less due to reflecting traffic signs and other
signage.
Automatic headlight calibration
bb No object in the field of vision that could be af-
fected by the headlights during calibration.
bb Vehicle positioned as straight as possible in front
of a projection surface, such as a wall (distance
> 5 m).
bb Dipped beam on when vehicle stationary.
bb Test run performed automatically when low
beams are activated.
Automatic headlight calibration starts on its own if
the conditions are right (depending on ambient
lighting, a good projection surface). The LED seg-
ments of the headlight are automatically activated
and deactivated repeatedly from right to left during
calibration and detected by the camera (A).
Calibration is used to check headlight alignment and
does not replace manual headlight adjustment.
Operating direction indicators and
the high-beam stalk
Fig. 111: Operating direction indicators, high beam and
headlight flasher
1 Direction indicator / left parking light
2 Direction indicator / right parking light
3 High beams
4 Headlight flasher
Operating direction indicators
e Push the stalk past pressure point 1 or 2. The
direction indicator remains active until the stalk
is returned to the initial position manually or au-
tomatically due to steering wheel movement.
Engaging comfort direction indication
e Push the stalk once to pressure point 1 or 2.
The direction indicators flash three times.
e In order to interrupt comfort direction indication,
press the stalk in the opposite direction.
Switching high beam on and off
bb Vehicles without Porsche Dynamic Light System
Plus (PDLS Plus).
– or –
Dynamic high beam deactivated.
Switching on
e Push the stalk once to pressure point 3.