2019-2024 Porsche Taycan 2 Door Porsche InnoDrive (PID) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Porsche InnoDrive (PID) for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
199
Porsche InnoDrive (PID)
General safety instructions
WARNING
Lack of attention
The increased comfort offered by the system should
not induce you to risk your safety. The driver remains
responsible when driving, such as by keeping a safe
distance or driving at an appropriate speed, even
when the system is activated. The system cannot
replace the driver's attentiveness.
e Drive with extreme care.
e If the system-related deceleration is insufficient,
slow the vehicle down immediately using the
footbrake.
e Make sure that it is possible to take over control
of the vehicle at all times.
WARNING
Unsafe traffic situations
and unfavourable road
conditions
Use of the system may cause accidents if the cur-
rent situation does not permit driving safely at an
adequate distance from the vehicle in front and at a
constant speed.
The system assists the driver when turning off and
driving on exits. If conditions are particularly poor,
unwanted driving situations may arise.
The vehicle may accelerate to the set speed in areas
near construction sites.
e Do not use the system in heavy traffic, in the vi-
cinity of construction sites or in built-up areas.
e When turning off and driving on exits while the
system is active, be sure to indicate in good time,
take particular care and, if necessary, take
control of the vehicle.
WARNING
Covered front camera or
radar sensor
Covering the front camera or radar sensor can ad-
versely affect or disable the function of the system.
e Always keep the radar sensor and camera area A
on the interior mirror free of dirt, ice and snow.
e Do not cover camera area A on the interior mirror
with objects (e.g. stickers).
Fig. 145: Location of the radar sensor
Fig. 146: Windscreen camera
WARNING
Damage to the radar
sensor and camera
Shocks or damage to the bumper, wheel housings or
underbody, such as through parking collisions, may
move the sensors. Stone damage in the area of the
camera on the interior mirror can impair the camera
view. This can adversely affect the system.
e Visit a qualified specialist workshop. Porsche
recommends a Porsche partner as they have
trained workshop personnel and the necessary
parts and tools.
WARNING
Foot placed on the ac-
celerator pedal
The system does not brake automatically when the
foot is placed on the accelerator pedal. Placing the
foot on the accelerator may override cruise and dis-
tance control.
e When the system is activated, remove your foot
from the accelerator pedal.
WARNING
Braking behaviour at
Stop and Yield signs
The system assists the driver when approaching
Stop and Yield signs if they are stored in the navi-
gation data. This will only slow down the vehicle but
not brake it to a standstill.
e You should brake to a standstill when approach-
ing Stop signs and, where the traffic situation
requires it, when approaching Yield signs as well.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
200
WARNING
Detecting traffic light
signals
The system does not detect traffic light signals.
e You should take control of the vehicle at traffic
lights that require your vehicle to brake and stop.
°
WARNING
Inadequate braking
power during automatic
braking by the system
If the system detects that braking assistance is re-
quired on the part of the driver, a warning signal
sounds and a warning symbol appears on the in-
strument cluster. In this case, the braking power of
the system is not sufficient to prevent a collision.
e You must brake immediately in this case.
WARNING
The system is switched
off.
The system switched off if the following situations
arise:
– PSM is deactivated.
– The driver’s door is opened.
– The driver’s seat belt is unfastened.
– Drive position N or R is selected.
– The parking lock or parking brake is activated.
– While driving on private roads and field tracks or
on streets where traffic calming measures are in
place (e.g. residential streets).
– Where the vehicle is in a position that cannot be
detected clearly by the system.
– In a country that has not been enabled.
– At a speed limit of under 30 km/h.
e You need to take control of the vehicle in such
situations.
Information
In some cases, the system automatically identifies
that driver intervention is necessary. In such cases, a
corresponding message appears in the instrument
cluster.
System limitations
WARNING
Unfavourable road and
weather conditions
Radar sensor vision can be impaired by rain, snow,
ice, fog, loose gravel or spray. Vehicles in front will
not be detected properly or may not be detected at
all.
Reflective objects such as ice, heavy rain, guardrails
or tunnel entrances may impair the functionality of
the radar sensor. A message indicating that the sys-
tem is not available will appear on the instrument
cluster.
e Do not use the system under such conditions.
WARNING
Undetected vehicles or
objects
The radar sensor detects a narrow, cone-shaped
area in front of your vehicle. As a result, vehicles or
objects may not be detected in time or cannot be
detected in the following situations:
– in the case of vehicles that change lanes or cut in
– in the case of vehicles with a small cross-section
or narrow vehicles
– when driving into and out of bends
– in the case of stationary vehicles
– in the case of vehicles with large overhangs
– in the case of pedestrians, cyclists and animals
– in the case of objects on the road
– in the case of oncoming vehicles and cross traffic
e Take action and brake if necessary.
e Drive with extreme care and always pay attention
to the traffic conditions and vehicle
surroundings.
Vehicles changing lanes or cutting in and
narrow vehicles
Fig. 147: Vehicles changing lanes or cutting in (A) and nar-
row vehicles (B)
Vehicles changing lanes will not be detected until
they are completely in the same lane and within the
detection range of the sensors.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
201
Cornering and stationary vehicles
Fig. 148: Cornering (C) and stationary vehicles (D)
When driving into and out of bends, vehicles will not
be detected or will be detected too late, or the sys-
tem will react to vehicles in adjacent lanes.
A stationary vehicle or obstacle that appears sud-
denly in the detection range of the radar sensor,
such as after a vehicle in front changes lanes or at
the end of a traffic jam, can only be detected by
Adaptive Cruise Control (ACC) to a limited extent.
Vehicles with large overhangs
Fig. 149: Vehicles with large overhangs
If there is a vehicle in front with a long overhang
(such as a timber lorry), the radar sensor may possi-
bly not detect the end of the vehicle or detect it
incorrectly.
Responding to warning messages
Always heed any warning and information messages
displayed in the vehicle.
> Please refer to chapter "Warning and information
messages" on page 271.
Operating principle
Porsche InnoDrive (PID) is a driver assistance sys-
tem that assists the driver when driving on well-
surfaced country roads and motorways.
Using navigation data as well as data from radars
and cameras, PID detects both the area directly
around the vehicle and the route ahead, determines
the best possible driving strategy in advance and
adapts the speed accordingly.
PID can assist the driver in the following situations:
Vehicle driving ahead
If a vehicle was detected ahead, PID brakes if the
vehicle is driving slower than the set desired speed
and keeps the distance from the vehicle ahead con-
stant in the preselected range. PID can continue
braking until your vehicle is stationary and starts
driving again automatically as soon as the vehicle in
front drives off again. A detected vehicle and the fact
that the vehicle has started driving again will be in-
dicated on the instrument cluster.
In bends
Navigation data and vehicle information is used to
adapt the speed to the road ahead.
Tight bends detected in advance are displayed on
the instrument cluster and the speed of the vehicle
is reduced in good time. The speed calculated for the
bend is also indicated through the speed prediction
system. If no bend ahead warning is displayed, the
speed will only be reduced slightly or will not be re-
duced at all. Vehicle handling in bends is also influ-
enced by the driving mode selected.
At roundabouts, junctions and on uphill and
downhill slopes
When navigation is active or when the driver indi-
cates in good time, PID reduces the speed before the
vehicle starts to change direction. A corresponding
display appears on the instrument cluster.
Information
When route guidance is active in the navigation
system, PID always orients itself according to the
proposed route. If route guidance is not active, it
adapts to the most plausible route.
On roads with speed limits
PID uses navigation data and data from cameras
(traffic sign recognition) to automatically detect the
speed limit within the system limits and changes the
desired speed accordingly.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
202
Speed limits detected in advance are displayed on
the instrument cluster and the speed of the vehicle
is reduced in good time. If a speed limit is not de-
tected in advance, the speed will not be reduced
until the vehicle is driving past the detected traffic
sign.
Consideration of speed limits is active automatically
when PID is activated.
At Stop and Yield signs
When approaching Stop and Yield signs, a message
appears in the instrument cluster and the speed is
reduced if the traffic signs are stored in the naviga-
tion data. It is up to the driver, however, to brake the
vehicle to a standstill.
If the driver accidentally continues driving at a Stop
sign, PID switches to passive mode and can be acti-
vated again afterwards by the driver.
If the driver continues driving at a Yield sign, PID re-
mains active, passes the Yield sign at a reduced
speed and accelerates again to the previously set
speed as soon as the traffic situation allows it. The
previously set speed can be resumed again immedi-
ately by pressing RESUME.
Controls
Fig. 150: Control stalk for driver assistance systems
R Switch systems on/off and open the options menu
S Open the options menu (when the system is switched
on)
1 Set/increase the desired speed
2 Reduce the desired speed
3 RESUME: Resume control, adopt speed/confirm speed
limit
4 CANCEL: Interrupt control
Display elements
Fig. 151: PID display
A Own speed
B Event up ahead: Display on speedometer and via sym-
bols (or one of the symbols)
C Set speed
D Status display
Status display symbols
Symbol Meaning
PID is passive.
PID is passive at set desired speed.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
203
Symbol Meaning
PID is active at set desired speed.
PID is active. A speed limit was de-
tected ahead or the set desired speed
was not yet reached.
A vehicle was detected ahead while
the desired speed was set. A vehicle
symbol is displayed instead of the
speedometer symbol.
Operating states
Passive
This mode is set after switching on and when PID is
active after pressing the brake pedal and after
pressing down the control stalk (CANCEL).
– The status display is grey.
– There is no control.
– The desired speed stored and desired distance
set are retained.
Active
This mode is set after setting the desired speed,
after resuming control (RESUME) and after tempo-
rarily overriding control by pressing the accelerator
pedal.
– The status display is green or blue.
– The speed and distance from the vehicle in front
are regulated subject to the recognised speed
limit (if activated) and the road ahead.
Temporarily passive
This mode is set while the accelerator pedal is
pressed when PID is active.
– A message indicating that PID is passive appears
on the instrument cluster.
– The status display is grey.
– There is no control.
– The stored target speed and selected target dis-
tance are retained.
– Control is active again after releasing the accel-
erator pedal.
Switching PID on and off
The system that was selected last is always
switched on. The system is initially in passive mode
when switched on. It must first be activated before
the control function starts working.
Switching the PID on
bb No driver assistance system has been switched
on yet.
1. Press the R button on the control stalk.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. If PID is not already selected, select PID using
the rotary knob on the steering wheel and press
to confirm.
PID is switched on and passive.
Switching from an already activated driver assis-
tance system to PID
1. Press the S button on the control stalk.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. Select PID using the rotary knob on the steering
wheel and press to confirm.
PID is switched on and passive.
Information
The last selected driver assistance system is re-
tained even after switching it off and operational
readiness is restored.
Switching off PID
e Press the R button on the control stalk.
The set desired speed is deleted.
The desired distance is stored.
Activating PID
bb PID switched on.
Setting the current driving speed as the desired
speed
1. Accelerate or decelerate to the desired speed
using the accelerator pedal.
2. Briefly press the control stalk forward (position
1) and release the accelerator pedal.
PID is active. The current speed is set as the desired
speed, shown in the status display and automatically
maintained unless a slower vehicle is detected
ahead.
Setting the detected speed limit as the desired
speed
bb Consider speed limits activated.
e Press the control stalk upwards (RESUME) and
release the accelerator pedal.
PID is active. The current detected speed limit is
set as the desired speed, shown in the status
display and automatically maintained unless a
slower vehicle is detected ahead.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
204
Information
– Speed limits are only considered when PID is
activated.
– The set maximum speed is adopted for roads
with no speed limit.
– When the system is active, it is also possible to
switch the driver assistance system using the S
button. The newly selected system is in passive
mode after switching.
Changing the desired speed
The set desired speed or the detected speed limit
can be changed by pressing the control stalk.
bb PID is active.
Increasing the speed
e Push the control stalk forward (position 1).
– Press briefly = 1 km/h (1 mph) increments
– Press and hold = 10 km/h (6 mph)
increments
Reduce speed
e Pull the control stalk (position 2).
– Pull briefly = 1 km/h (1 mph) increments
– Pull and hold = 10 km/h (6 mph) increments
Resetting the changed desired speed to the
detected speed limit
e Briefly push the control stalk up (RESUME).
The currently detected speed limit is confirmed.
Discarding an automatically accepted speed
limit
e Push the control stalk up for longer (RESUME).
The set speed limit is discarded and the previ-
ously set desired speed is retained.
Changing the desired distance
> Please refer to chapter "Adaptive Cruise Control
(ACC)" on page 34.
Overriding speed and distance
control temporarily
> Please refer to chapter "Adaptive Cruise Control
(ACC)" on page 34.
Interrupting and resuming cruise
control and distance control
> Please refer to chapter "Adaptive Cruise Control
(ACC)" on page 34.
Braking to a standstill and driving
off again
> Please refer to chapter "Adaptive Cruise Control
(ACC)" on page 34.
Activating and deactivating con-
sideration of speed limits
e
e Assistance e e Assistance system
settings e Porsche InnoDrive e Consider speed
limits
Manually considering a detected speed limit
If the consideration of speed limits is deactivated,
Porsche InnoDrive still displays detected events
such as bends, grades and vehicles driving ahead. A
detected speed limit can be manually accepted by
the driver.
bb Consideration of speed limits deactivated.
bb The speed limit is detected and appears grey in
the status display.
e Push the control stalk up (RESUME).
The set speed limit is displayed in the status
display in blue.
Setting the maximum speed
On roads with no speed limit or if no speed limit has
been detected, the maximum speed will be set as
the desired speed. If a speed limit is detected, the
following applies:
– If the maximum speed is above the speed limit,
the speed limit will be set as the new desired
speed.
– If the maximum speed is below the speed limit,
the maximum speed will be set as the new de-
sired speed.
Setting the maximum speed
e
e Assistance e e Assistance system
settings e Porsche InnoDrive e Maximum
speed
The maximum speed set remains active until it is
reset, even with a change of driver or when the ve-
hicle is restarted.
Additional information
Example of how Porsche InnoDrive works
The example below compares two scenarios when
driving into a city with a 50 km/h (30 mph) speed
limit - one scenario with the Consider speed limits
function activated and the other with the Consider
speed limits function deactivated.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche InnoDrive (PID)
205
Consider speed limits function activated
Fig. 152: Example of driving with the Consider speed limits
function activated
A The vehicle regulates the speed to the de-
tected speed limit of 100 km/h (60 mph).
B
The driver sets the desired speed
5 km/h (3 mph) higher based on the de-
tected speed limit. The vehicle regulates the
speed to 105 km/h (63 mph).
C
A speed limit of 50 km/h (30 mph) has been
detected ahead (e.g. built-up area boun-
dary). The vehicle progressively reduces the
speed until the municipal boundary is
reached.
The detected speed limit is displayed in
blue.
D When the municipal bounday is reached, PID
regulates the speed to the new speed limit
of 50 km/h (30 mph).
Consider speed limits function deactivated
Fig. 153: Example of driving with the Consider speed limits
function deactivated
A The vehicle regulates the speed to the de-
sired speed of 100 km/h (60 mph) set by
the driver.
B
The driver sets the speed 5 km/h (3 mph)
higher. The vehicle regulates the speed to
105 km/h (63 mph).
C
After driving past a 50 km/h (30 mph)
speed limit sign, the vehicle regulates the
speed to the desired speed of
105 km/h (63 mph) set by the driver.
The speed limit of 50 km/h (30 mph) is
displayed in grey on the instrument cluster.
D The driver acknowledges the currently de-
tected speed limit of 50 km/h (30 mph) by
pressing up the control stalk (RESUME). The
vehicle regulates the speed to
50 km/h (30 mph) and the set desired
speed appears green in the status display.
If the speed is set again before reaching the
traffic sign, the set desired speed will be
displayed in blue.

Related Topics

Popular Owner Manuals