2019-2024 Porsche Taycan 2 Door Porsche Stability Management (PSM) -> ABS brake system (Anti-lock Brake System) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Porsche Stability Management (PSM) -> ABS brake system (Anti-lock Brake System) for Your Porsche Taycan 2 Door First Generation (2019-2024)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche Stability Management (PSM)
207
Fig. 154: PSM OFF button
e Press and hold the
button for at least
2 seconds.
The
button lights up yellow and PSM OFF is
displayed on the instrument cluster.
Information
When you brake in the ABS control range, the vehicle
is stabilised even when PSM is switched off. One-
sided spinning of the wheels is prevented even when
PSM is switched off.
In exceptional situations, however, it can be advan-
tageous to switch off PSM temporarily:
– on loose surfaces
– in deep snow
– when "rocking the vehicle free"
Information
When PSM SPORT mode is active, it is only possible
to switch to PSM OFF mode if PSM was activated
beforehand.
Switching PSM back on
e Press the
button.
PSM is active immediately.
The
button lights up white.
PSM SPORT or PSM OFF no longer appears on
the instrument cluster.
ABS brake system (Anti-lock
Brake System)
WARNING
Loss of control over the
vehicle
ABS does not reduce the risk of accidents owing to
an inappropriate driving speed.
The increased safety provided should not induce you
to take greater risks with your safety. The limits set
by the laws of driving physics cannot be overcome,
even with ABS.
e Despite the advantages of ABS, the driver is re-
sponsible for adapting his or her driving style and
manoeuvres in line with road and weather con-
ditions, as well as the traffic situation.
Operating principle
The anti-lock brake system (ABS) prevents the
wheels from locking during full braking. This gives
the vehicle improved driving stability and manoeu-
vrability in hazardous situations.
ABS begins to take control as soon as one wheel
shows a tendency to lock.
This controlled braking process is comparable with
extremely rapid cadence braking. A pulsating brake
pedal and a "juddering noise" alert the driver to
adapt his or her driving speed to the road conditions.
Performing full braking with ABS
Full braking is necessary:
e Fully depress the brake pedal during the entire
braking operation, despite the pulsing pedal. Do
not reduce the braking pressure.
Multi-collision braking
During an accident, multi-collision braking can help
the driver reduce the risk of skidding and further
collisions during the accident through automatically
initiated braking.
Prerequisites
Multi-collision braking only works:
– in the event of front, side and rear-end collisions
– if the airbag control unit detects a corresponding
activation threshold during an accident
– if an accident occurs when the vehicle is travel-
ling at a speed of more than approx. 10 km/h
Information
The vehicle is decelerated automatically by the PSM
system, provided the hydraulic brake system, PSM,
and electrical system remain undamaged and op-
erational during the accident.
Exceptional conditions
The following activities prevent automatic braking in
the event of an accident:
– The driver presses noticeably on the accelerator
pedal.
– The braking pressure exerted by the driver on the
brake pedal is stronger than the brake pressure
applied by the system.

Related Topics

Popular Owner Manuals