2025-2026 Porsche Taycan 2 Door 12-volt battery -> Replacing the 12 V lithium battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

12-volt battery -> Replacing the 12 V lithium battery for Your Porsche Taycan 2 Door Second Generation (2025-2026)

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
12-volt battery
285
3. Fold open the cap on the positive terminal for
jump-lead starting +.
4. Connect the red positive cable to the positive
terminal for jump-lead starting +.
5. Connect the red positive cable to the positive
terminal of the donor battery.
6. Connect the black negative cable to the negative
terminal of the donor battery.
7. Connect the black negative cable to the ground
point–.
8. Allow the engine of the donor vehicle to run at a
higher engine speed.
9. Charge the 12 V lithium battery from the exter-
nal power supply (min. 5 minutes).
The electrical system is reactivated
automatically.
10.Ready for operation:
First, disconnect the black negative cable from
the ground point – then from the negative ter-
minal of the donor battery.
11.Ready for operation:
Disconnect the red positive cable from the pos-
itive terminal of the donor battery first, then from
the positive terminal for jump-lead starting +.
12.Close the cap on the positive terminal for jump-
lead starting +.
13.Install the plastic cover. Please refer to
chapter "Installing and removing the plastic cov-
er in the front luggage compartment" on
page 155.
14.To continue charging the 12 V lithium battery:
Charge the 12 V lithium battery using the
charger. Please refer to chapter "Charging the 12
V battery using the charger" on page 283.
– or –
Establish operational readiness. Please refer to
chapter "Starting, driving and stopping the ve-
hicle" on page 236.
Replacing the 12 V lithium battery
WARNING
Danger of fire due to un-
suitable 12 V lithium
battery
In addition to significant malfunctions of the vehicle
electrical system, use of an unsuitable 12 V lithium
battery or its incorrect installation may in excep-
tional cases cause a fire (e.g. during charging).
e Never attempt to replace the 12 V lithium bat-
tery yourself. Only have the 12 V lithium battery
of this vehicle replaced with a 12 V lithium bat-
tery explicitly specified by Porsche for this ve-
hicle. The use of other lithium or lead-acid
batteries results in significant malfunctions in-
cluding total failure of the electrical system.
e Always have the 12 V lithium battery replaced by
a qualified specialist workshop. Porsche recom-
mends a Porsche partner as they have trained
workshop personnel and the necessary parts and
tools.
e Observe the disposal instructions for lithium
batteries.
Power interruption
Following a temporary power interruption, some
equipment has to be reinitialised.
1. Store the end position for the power windows.
> Please refer to chapter "Windows" on
page 277.
2. Registering wheels and tyres in Tyre Pressure
Monitoring (TPM).
> Please refer to chapter "Tyres and Wheels"
on page 249.

Related Topics

Popular Owner Manuals