2013-2018 Renault Captur SUV Getting to know your vehicle -> Headlight beam adjustment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Getting to know your vehicle -> Headlight beam adjustment for Your Renault Captur SUV First Generation (2013-2018)

lighting:
exterior ............................................(up to the end of the DU)
lights:
adjusting .........................................(up to the end of the DU)
lights
adjustment ......................................(up to the end of the DU)
headlight beam adjustment ..................(up to the end of the DU)
signals and lights ..................................(up to the end of the DU)
electric beam height adjustment ...........(up to the end of the DU)
1.75
ENG_UD51980_3
Réglage des faisceaux (X87 - Renault)
Headlight beam adjustment
HEADLIGHT BEAM ADJUSTMENT (1/2)
On vehicles fitted with this function,
control A allows you to adjust the height
of the beams according to the load.
Turn control A downwards to lower the
headlights and upwards to raise them.
A
For manual settings
Examples of positions for adjusting control A according to the load
Halogen
headlights
LED headlight
0 0 Driver alone or with front passenger
1 1 All seats occupied
1 2
Driver with passengers and luggage
(or load) reaching the maximum
permissible all-up weight
2 3
Driver without passengers and luggage
(or load) reaching the maximum
permissible all-up weight
4 4 To use according to the vehicle load
The table below gives some examples. In all cases, adjust control A accord-
ing to the vehicle load so that the road can be seen and other drivers are not
dazzled.
1.76
ENG_UD51980_3
Réglage des faisceaux (X87 - Renault)
HEADLIGHT BEAM ADJUSTMENT (2/2)
Temporary adjustment
Open the bonnet and identify the mark-
ing B next to one of the front headlight
projectors.
For each halogen headlight, use a
screwdriver to turn the screw 1 by a
quarter turn towards the - symbol to
lower the beams.
Return to the original position once your
trip is over: turn the screw 1 a quarter of
a turn towards the + symbol to raise the
beams.
When driving on the left in a left-
hand drive vehicle (or vice versa),
you must adjust your lights tempo-
rarily during your stay.
B
1
For an LED headlight, use a screw-
driver to turn the bolt 1 by a half turn to-
wards the - symbol to lower the beams.
Return to the original position once
your trip is over: turn the bolt 1 by a half
turn towards the + symbol to raise the
beams.

Related Topics

Popular Owner Manuals