2019-2026 Renault Captur SUV Your Comfort User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Your Comfort for Your Renault Captur SUV Second Generation (2019-2026)

Section 3: Your Comfort  
Multi-Sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Air Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Manual air conditioning, heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
3.2  
3.3  
3.5  
Automatic climate control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11  
Air conditioning: information and advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.15  
Multimedia equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17  
Electric windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20  
Electric sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.22  
Sun visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.25  
Interior lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.26  
Passenger compartment storage, fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.29  
Accessories socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.33  
Rear headrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.34  
Rear bench seat: functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.35  
Luggage compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.37  
Rear parcel shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.38  
Luggage compartment storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.39  
Transporting objects in the luggage compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.40  
Transporting objects: towbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.41  
Roof bars, spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.42  
3.1  
MULTI-SENSE  
The MULTI-SENSE system enables a  
choice between three driving modes  
that can be used to control, depending  
on the vehicle: driving, ambient lighting,  
comfort and engine sound:  
– the Eco and Sport modes are pre-  
configured and can be partially cus-  
tomised (ambient lighting, etc.);  
Mode Eco  
1
Eco mode focuses on energy saving.  
The steering is smooth, engine and  
gearbox management enable fuel con-  
sumption to be reduced ➥ 2.30.  
Sport mode  
This mode enables an increased re-  
sponsiveness from the engine and the  
gearbox. The steering is firmer.  
– the My Sense mode is customisable.  
The drive modes affect the:  
– power-assisted steering;  
– Electronic Stability Program;  
– the response of the engine and gear-  
box.  
2
My Sense mode  
Using standard default vehicle settings,  
this mode can be used to manually con-  
figure driving, ambient lighting, comfort  
and engine sound (depending on the  
vehicle).  
They also affect the:  
– the lighting in the passenger com-  
partment and of the instrument  
panel;  
– the information on the instrument  
panel and multimedia screen;  
– depending on the vehicle, the engine  
sound.  
Accessing the menu  
You can access MULTI-SENSE, de-  
pending on the vehicle:  
– from the multimedia screen 1;  
– using the 2 switch.  
Please refer to the multimedia instruc-  
tions for further information.  
After the engine is switched off, the  
vehicle will always restart in My  
Sense mode.  
In any mode, you can change the colour of the ambient lighting as well as the  
format of the information displayed on the instrument panel and multimedia  
screen.  
Engine settings are specific to each  
of the driving modes and cannot be  
customised.  
You can also reset to the default settings.  
3.2  
AIR VENTS, air outlets (1/2)  
3
2
1
2
3
4
1
3
5
6
7
5
8
1 Side air vents  
5 Footwell heater outlets for front  
passengers  
6 Control panel  
7 Footwell heater outlets for rear  
passengers (depending on the  
vehicle)  
2 Demister outlets for side windows  
3 Windscreen demisting vents  
4 Centre air vents  
8 Rear console air vents  
3.3  
AIR VENTS, air outlets (2/2)  
9
9
1
9
8
4
7
Central 4, side 1 and rear air  
vents 8  
Rear seats  
(depending on vehicle)  
Passenger footwell heater outlets 8.  
Air flow  
To close: move the cursor 9 towards the  
outside of the vehicle beyond the resist-  
ance point.  
To open: move the cursor 9 towards the  
inside of the vehicle.  
Direction  
Do not add anything to the  
vehicle’s ventilation circuit  
(for example, to remove  
bad odours).  
Move the cursor 9 to the desired posi-  
tion.  
Do not attach any objects to the air  
vents (e.g. telephone mounting).  
There is a risk of damage or of  
fire.  
Risk of damage.  
3.4  
MANUAL AIR CONDITIONING, HEATING SYSTEM (1/6)  
A
Distribution of air in the  
passenger compartment  
There are five air distribution options.  
Turn control 1 to choose the distribution  
option.  
3
4
2
5
6
1
The air flow is directed to the  
windscreen and the front side  
window demisting vents.  
W
The air flow is distributed be-  
tween front side window de-  
misting vents, the windscreen demist-  
ing vents and the footwells.  
The air flow is directed mainly  
towards the footwells.  
The A controls  
(depending on vehicle)  
The air flow is directed to-  
wards the dashboard air vents,  
the front footwells and, depending on  
the vehicle, the second row footwells.  
1 Distribution of air in the passenger compartment.  
2 De-icing/demisting of the rear screen and, depending on the vehicle, the rear view  
The air flow is mainly directed  
to the dashboard air vents.  
mirrors.  
J
3 Adjusting the ventilation fan speed.  
4 Air recirculation.  
5 Adjusting the air temperature.  
6 Air conditioning.  
3.5  
MANUAL AIR CONDITIONING, HEATING SYSTEM (2/6)  
Switching air conditioning on  
or off  
7
B
6
3
1
Activation is not possible if the 3 control  
is set to “0” (control A) or “OFF” (con-  
trol B).  
5
Press the 6 button to deactivate the air  
conditioning. The button’s warning light  
will go out.  
The air conditioning system is used  
for:  
– lowering the temperature inside the  
passenger compartment;  
4
2
– eliminating condensation more  
quickly.  
Controls B  
(depending on the vehicle)  
1 Distribution of air in the passenger compartment.  
2 De-icing/demisting of the rear screen and, depending on the vehicle, the rear view  
mirrors.  
3 Adjusting the ventilation fan speed.  
4 Air recirculation.  
5 Adjusting the air temperature.  
6 Air conditioning control.  
7 “Clear View” function.  
3.6  
MANUAL AIR CONDITIONING, HEATING SYSTEM (3/6)  
Stopping the system  
Air recirculation (isolation of  
the passenger compartment)  
Air recirculation is for:  
Switching air conditioning on  
or off  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Turn the 3 control to “OFF” or “0” to  
switch off the system or press the 4  
button. To start it, turn the 3 control to  
adjust the fan speed.  
– isolating the vehicle from the exter-  
nal atmosphere (driving in polluted  
areas, etc.);  
Activation is not possible if the 3 control  
is set to “0” (control A) or “OFF” (con-  
trol B).  
Clear View function  
Press the 7 button: the integrated indi-  
cator light comes on.  
– to cool the passenger compartment  
temperature more quickly when air  
conditioning is activated.  
Press the 6 button to deactivate the air  
conditioning. The button’s warning light  
will go out.  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, and the door  
mirrors (depending on the vehicle). It  
automatically activates the air condi-  
tioning and rear screen de-icing func-  
tions.  
This function is managed automatically  
but you can also activate it manually. In  
this case, the operation is confirmed by  
the button’s warning light 4.  
The air conditioning system is used  
for:  
Manual use  
– lowering the temperature inside the  
passenger compartment;  
Press button 4, the button’s warning  
light comes on.  
Press button 2 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
– eliminating condensation more  
quickly.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows. To avoid this, air recir-  
culation may be disabled automatically  
under certain conditions.  
To exit this function, press button 7  
or 5.  
Fuel consumption increases when  
the air conditioning is being used  
(switch it off when it is not required).  
Using the demisting/de-icing func-  
tion will disable the air recirculation.  
3.7  
MANUAL AIR CONDITIONING, HEATING SYSTEM (4/6)  
3
5
1
Switching the air  
recirculation on  
Press button 4: the button’s warning  
light comes on. Under these conditions,  
air is taken from the passenger com-  
partment and is recirculated, with no air  
being taken from outside the vehicle.  
If the air conditioning is not acti-  
vated (“A/C” warning light on the 6  
button goes off), prolonged use of  
recirculated air may cause mist to  
form on the side windows and wind-  
screen as well as other problems  
due to the presence of non-recircu-  
lated air in the passenger compart-  
ment. To avoid this, air recirculation  
is disabled automatically after a cer-  
tain time.  
Air recirculation is for:  
– isolating the vehicle from the exter-  
nal atmosphere (driving in polluted  
areas, etc.);  
– to cool the passenger compartment  
temperature more quickly when air  
conditioning is activated.  
3.8  
MANUAL AIR CONDITIONING, HEATING SYSTEM (5/6)  
Adjusting the air temperature  
4
3
2
5
Turn control 5 to obtain the desired  
temperature. The further towards the  
red the slide is, the higher the tempera-  
ture will be.  
1
When the air conditioning system is  
used for long periods, it may begin to  
feel cold. To increase the temperature,  
turn control 5 to the right.  
Adjusting the ventilation  
speed  
Move the 3 control to adjust the amount  
of air blown. If you want to shut off the  
flow of air, set the 3 control to “0” (con-  
trol A) or “OFF” (control B).  
The system is deactivated: the ventila-  
tion speed is zero (vehicle stationary).  
You can, however, still feel a slight flow  
of air when the vehicle is moving.  
Using  
W
position on the 1 con-  
trol will disable the air recirculation  
function in order to prevent misting  
of the windscreen.  
3.9  
MANUAL AIR CONDITIONING, HEATING SYSTEM (6/6)  
4
3
2
5
1
Rapid demisting  
Rear screen de-icing/  
demisting  
Turn controls 1, 3 and 5 to:  
With the engine running, press  
button 2. The operating tell-tale comes  
on.  
– demisting  
W
;
– the fan speed in position 3 or 4;  
This function permits rapid demisting/  
de-icing of the rear screen and de-icing  
of the door mirrors (on equipped vehi-  
cles).  
– maximum temperature.  
Press the 4 button to deactivate the air  
recirculation (warning light off).  
To exit this function, press button 2  
again. Warning light goes out.  
Demisting automatically stops.  
3.10  
AUTOMATIC CLIMATE CONTROL (1/4)  
Adjusting the ventilation  
speed.  
2
3
1
4
5
6
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
You can still adjust the ventilation  
speed by turning control 1 to increase  
or reduce the ventilation speed.  
Adjusting the air temperature  
Turn control 3 to obtain the desired  
temperature.  
7
Automatic mode  
8
Turning the control to the right in-  
creases the temperature.  
The controls  
(depending on the vehicle)  
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising consumption.  
The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
1 Adjusting the ventilation fan speed.  
2 “Clear View” function.  
3 Adjusting the air temperature.  
4 Automatic mode.  
5 Air conditioning control.  
6 Distribution of air in the passenger  
compartment.  
AUTO: allows the selected comfort  
level to be best attained, depending on  
the exterior conditions. Press button 4.  
7 Air recirculation.  
8 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
rear view mirrors.  
Any action on a button other than  
button AUTO triggers deactivation  
of automatic mode.  
3.11  
AUTOMATIC CLIMATE CONTROL (2/4)  
Clear View function  
2
4
6
Press the 2 button: the integrated indi-  
cator light comes on.  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, and the door  
mirrors (depending on the vehicle). It  
automatically activates the air condi-  
tioning and rear screen de-icing func-  
tions.  
Press button 8 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
8
To exit this function, press button 2  
or 4.  
The air flow is directed towards  
the dashboard air vents, the  
front footwells and, depending on the  
vehicle, the second row footwells.  
Adjusting the distribution  
of air in the passenger  
compartment  
Turn control 6. The integrated warning  
light in the button comes on.  
The air flow is mainly directed  
to the dashboard air vents.  
All the air is then directed to  
the windscreen and front side  
window demisting vents.  
The air flow is directed mainly  
towards the footwells.  
W
The air flow is distributed be-  
tween front side window de-  
misting vents, the windscreen demist-  
ing vents and the footwells.  
3.12  
AUTOMATIC CLIMATE CONTROL (3/4)  
5
8
Rear screen de-icing/  
demisting  
Switching air conditioning on  
or off  
Press the 8 button: the integrated in-  
dicator light comes on. This function  
enables rapid demisting or de-icing of  
the rear screen and de-icing of the rear  
view mirrors (on equipped vehicles).  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Press the 5 button to deactivate the air  
conditioning. The integrated indicator  
light goes off.  
To exit this function, press button 8  
again. Demisting automatically stops.  
3.13  
AUTOMATIC CLIMATE CONTROL (4/4)  
Stopping the system  
1
4
Turn the control 1 to “OFF” to stop the  
system. To start it, turn the control 1  
again, then adjust the fan speed or  
press the button 4.  
7
Manual use  
Air recirculation (isolation of  
the passenger compartment)  
This function is managed automatically  
but you can also activate it manually. In  
this case, the operation is confirmed by  
a warning light on the button 7.  
Press the 7 button: the integrated indi-  
cator light comes on.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
To avoid this, air recirculation is disa-  
bled automatically after a certain time.  
Fuel consumption increases when  
the air conditioning is being used  
(switch it off when it is not required).  
Using the demisting/de-icing func-  
tion will disable the air recirculation.  
3.14  
AIR CONDITIONING: information and operating instructions (1/2)  
Advice on use  
Fuel consumption  
Operating faults  
In some situations (air conditioning off,  
air recirculation activated, ventilation  
speed at zero or low etc.), you may  
notice that condensation starts to form  
on the windows and windscreen.  
You will normally notice an increase in  
fuel consumption (especially in town)  
when the air conditioning is operating.  
As a general rule, contact your ap-  
proved dealer in the event of an oper-  
ating fault.  
For vehicles fitted with air conditioning  
with no automatic mode, switch off the  
system when it is not required.  
– Reduction in de-icing, demisting  
or air conditioning performance.  
This may be caused by the passen-  
ger compartment filter cartridge be-  
coming clogged.  
If there is condensation, use the “Clear  
View” function to remove it, then use  
the air conditioning in automatic mode  
to stop it forming again.  
Advice for reducing consumption  
and helping to preserve the environ-  
ment  
– No cold air is being produced.  
Check that the controls are set cor-  
rectly and that the fuses are sound.  
Otherwise, switch off the system.  
Drive with the air vents open and the  
windows closed. If the vehicle has been  
parked in the sun, open the doors for a  
few moments to let the hot air escape  
before starting the engine.  
Presence of water under the  
vehicle  
Maintenance  
Refer to the Maintenance Document  
for your vehicle for the inspection fre-  
quency.  
After prolonged use of the air condi-  
tioning system, it is normal for water  
to be present under the vehicle. This is  
caused by condensation.  
Do not add anything to the  
vehicle’s ventilation circuit  
(for example, to remove  
bad odours).  
Do not open the refriger-  
ant fluid circuit. The fluid  
may damage eyes or skin.  
Use the air conditioning system reg-  
ularly, even in cold weather, running  
it at least once a month for approxi-  
mately 5 minutes.  
There is a risk of damage or of  
fire.  
3.15  
AIR CONDITIONING: information and operating instructions (2/2)  
Type of refrigerant fluid  
Additional information  
Ñ
Depending on label and depending on  
the type of refrigerant:  
A
Type of oil in the air condi-  
tioning circuit  
Refrigerant fluid R-134yf  
– (1) 0.420 kg  
Inflammable product  
– (2) GWP 4  
Consult the driver’s hand-  
book  
– (3) 0.002t  
Maintenance  
(1) Quantity of refriger-  
ant fluid present in the  
vehicle.  
x.xxx kg  
Refrigerant fluid  
The refrigerant fluid circuit (of which  
some components are hermetically  
sealed) may contain fluorinated green-  
house gases.  
(2) Global warming po-  
tential.  
GWP xxxx  
Do not open the refriger-  
ant circuit. The fluid may  
damage eyes or skin.  
Depending on the vehicle, you will find  
the following information on label A af-  
fixed inside the engine compartment.  
CO2 eq (3) Quantity in weight  
x.xxx t and in CO2 equivalent.  
The presence and location of the infor-  
mation on label A depends on the ve-  
hicle.  
Before carrying out any  
action in the engine com-  
partment, you must switch  
off the ignition. ➥ 2.4 or  
➥ 2.6.  
3.16  
MULTIMEDIA EQUIPMENT (1/3)  
A
B
C
1
5
1
4
4
4
2
2
3
3
3
The sockets USB can also be used to  
recharge accessories with a maximum  
power rating of 12 Watts (5 Volts) per  
socket, which have been approved by  
our Technical Department.  
Multimedia system A, B or  
radio C  
The location and operation of equip-  
ment may vary according to the vehicle.  
Multimedia sockets 2  
You can use the USB sockets to access  
the multimedia content of your acces-  
sories and to update the system.  
The various sources can be selected  
using the multimedia screen or the  
radio and the steering column controls.  
1 Multimedia screen;  
2 Multimedia sockets;  
3 Steering column controls;  
4 Steering wheel controls;  
5 Radio.  
The JACK socket enables the radio to  
be used with an auxiliary cable.  
Connect accessories with a  
maximum power of 12 watts  
only.  
Fire hazard.  
Please refer to the multimedia in-  
structions for further information.  
3.17  
MULTIMEDIA EQUIPMENT (2/3)  
8
4
6
7
Steering column controls 4  
Microphone 8  
You can use the hands-free telephone 6  
and voice recognition 7 controls on ve-  
hicles fitted with these.  
3.18  
MULTIMEDIA EQUIPMENT (3/3)  
9
9
Wireless charger 9  
(depending on the vehicle)  
➥ 3.29  
Using the telephone  
We remind you of the need  
to conform to the legislation  
in force concerning the use  
of such equipment.  
3.19  
ELECTRIC WINDOWS (1/2)  
These systems operate with the igni-  
tion on or off, until one of the front doors  
is opened (limited to about 3 minutes).  
1
5
6
Driver’s responsibility  
2
Never leave your vehicle  
with the card or key inside,  
with a child, adult who is not  
self-sufficient or a pet in the vehicle,  
even for a short while.  
3
4
One-touch electric windows  
They may pose a risk to themselves  
or to others by starting the engine  
or activating equipment (such as the  
gear lever or electric windows).  
Avoid resting any objects against  
a half-open window: there is a risk  
that the electric window could be  
damaged.  
Briefly press or pull a window switch  
as far as it will go: the window will be  
raised or lowered fully. Pressing the  
switch again stops the window moving.  
Note: the rear windows do not open  
fully  
From the driver’s seat, use switch:  
1 for the driver’s side;  
2 for the front passenger side;  
3 and 5 for the rear passengers.  
From the passenger seats, use  
switch 6.  
If any part of the body becomes  
trapped, reverse the direction of the  
window immediately by pressing the  
relevant switch.  
Passenger safety  
The driver can prevent the  
front and rear passenger  
electric windows from op-  
erating (and the driver’s window)  
by pressing switch 4. A confirmation  
message is displayed on the instru-  
ment panel.  
Risk of serious injury.  
3.20  
ELECTRIC WINDOWS (2/2)  
One-touch electric windows  
(continued)  
Note: if the window detects resistance  
when closing (e.g. tree branch etc.), it  
stops and then lowers again by a few  
centimetres.  
Remote control window  
closing  
Operating faults  
In case of a fault when closing a  
window, the system reverts to normal  
mode: pull the switch concerned up as  
often as necessary to fully close the  
window (the window will close gradu-  
ally), hold the switch (still on the clos-  
ing side) for one second then lower and  
raise the window fully to reinitialise the  
system.  
When the doors are locked from the  
outside, if you double-press the lock-  
ing button on the driver’s door in  
hands-free mode, on the card or, de-  
pending on the vehicle, on the key,  
all of the windows (and sunroof de-  
pending on the vehicle) equipped with  
a one-touch electric window will close  
automatically.  
It is recommended that the user only  
operates the system when the vehi-  
cle can be seen clearly and no one is  
inside.  
Impossible to operate the  
one-touch electric window  
The one-touch electric window is  
equipped with heat protection: if you  
press the switch for the window more  
than 16 consecutive times it goes into  
protection mode (locking the window).  
If necessary, contact an approved  
Dealer.  
You can:  
– use the electric window switch briefly  
and with intervals of approximately  
30 seconds;  
– with the engine running, the window  
will be unlocked after approximately  
20 minutes of inaction on the electric  
window switch.  
When closing the windows, ensure that no part of the body (arm, hand,  
etc.) is protruding from the vehicle.  
Risk of serious injury.  
3.21  
ELECTRIC SUNROOF (1/3)  
1
Driver’s responsibility  
Never leave an animal,  
child or non-autonomous  
adult alone in your vehicle,  
even for a short time.  
B
A
C
2
The reason for this is that the child  
may endanger himself or others by  
starting the engine, activating equip-  
ment such as the window winders  
for example, or locking the doors.  
D
0
4
3
If something gets trapped, reverse  
the direction of travel as soon as  
possible by turning button 4 fully to  
the right (position D).  
To slide the curtain 1  
To slide the sunroof  
Risk of serious injury.  
– To open: push the handle 2 rear-  
wards to move the blind to the de-  
sired position;  
– To tilt: move the marked position 3  
to position A;  
– to open: move the marked posi-  
tion 3 to position B, C or Ddepending  
on the type of opening required;  
– to close: pull the handle 2 forwards  
to move the blind to the desired posi-  
tion.  
– to close: move the marked posi-  
tion 3 to position 0.  
If the vehicle is equipped  
with this function, this action  
will activate deadlocking.  
➥ 1.5 or ➥ 1.9.  
Check that there is no-one still  
inside the vehicle  
3.22  
ELECTRIC SUNROOF (2/3)  
Closing the sunroof by  
remote control  
If you press the locking button on the  
card twice in quick succession, the  
windows and sunroof will close auto-  
matically.  
B
A
C
It is recommended that the user only  
operates the system when the vehi-  
cle can be seen clearly and no one is  
inside.  
0
D
4
3
Special features  
Your vehicle is fitted with an anti-pinch  
facility: when the sunroof encounters  
resistance whilst closing (branch of  
a tree, etc.), it stops and then moves  
back a few centimetres.  
After closing the sunroof by remote  
control, pressing button 4 allows the  
sunroof to return to its previous posi-  
tion.  
If the vehicle is equipped  
with this function, this action  
will activate deadlocking.  
➥ 1.5 or ➥ 1.9.  
When closing the sunroof,  
ensure that no part of the  
body (arm, hand, etc.) is  
protruding from the vehicle.  
The sunroof will not open when the  
temperature is below -20°C. However,  
it will still close.  
Check that there is no-one still  
inside the vehicle  
Risk of serious injury.  
3.23  
ELECTRIC SUNROOF (3/3)  
Precautions during use  
– Vehicle with loaded roof bars.  
As a general rule, if there is a load  
on the roof, use of the sunroof is not  
recommended.  
Before using the sunroof, check the  
objects and/or accessories (bike  
racks, roof boxes, etc.) attached to  
the roof bars: they should be prop-  
erly arranged and secured and  
should not interfere with the opera-  
tion of the sunroof.  
B
A
C
0
D
Driver’s responsibility  
Never leave an animal,  
child or non-autonomous  
adult alone in your vehicle,  
4
3
Contact an approved dealer for de-  
tails of possible conversions;  
even for a short time.  
The reason for this is that the child  
may endanger himself or others by  
starting the engine, activating equip-  
ment such as the window winders  
for example, or locking the doors.  
Operating faults  
– check that the sunroof is properly  
closed before leaving your vehicle;  
If the sunroof will not close, move the  
marked position 3 to position 0 then  
press button 4 until the sunroof is com-  
pletely closed: consult an approved  
dealer.  
– clean the seal every three months  
using products recommended by our  
Technical Department;  
If something gets trapped, reverse  
the direction of travel as soon as  
possible by turning button 4 fully to  
the right (position D).  
– do not open the sunroof immedi-  
ately after it has rained or immedi-  
ately after washing the vehicle.  
Risk of serious injury.  
Important: during this operation, the  
sunroof anti-pinch function is de-  
activated. Contact your approved  
Dealer as soon as possible;  
3.24  
SUN VISOR  
2
1
3
Front sun visor  
Lower sun visor 1.  
Courtesy mirrors  
(depending on the vehicle)  
Lift the cover 2. The light 3 switches on  
automatically.  
When driving, ensure the  
courtesy mirror cover is  
closed.  
Risk of injury.  
3.25  
INTERIOR LIGHTING (1/3)  
2
1
3
2
3
A
C
B
Courtesy light A  
Press switch 1 for:  
Reading lights B or C  
Press the 2 switch for the driver, 3  
switch for the front passenger, for per-  
manent lighting.  
– permanent lighting;  
– lighting controlled by the unlocking of  
the vehicle or by opening one of the  
doors. This switches off after a time  
delay, once the doors concerned  
have been closed correctly;  
Note: on vehicles fitted with a multime-  
dia screen, you can use the multime-  
dia screen to deactivate/activate the  
reading lights which switch on when  
the doors or luggage compartment are  
opened. ➥ 1.83.  
– lighting switches off immediately.  
3.26  
INTERIOR LIGHTING (2/3)  
D
E
4
5
6
7
Courtesy light D  
Press switch 4 for:  
Map reading lights E  
Press switch 5 6 or 7 for constant light-  
ing  
– permanent lighting;  
Note: on vehicles fitted with a multime-  
dia screen, you can use the multime-  
dia screen to deactivate/activate the  
reading lights which switch on when  
the doors or luggage compartment are  
opened. ➥ 1.83.  
– lighting controlled by the unlocking of  
the vehicle or by opening one of the  
doors. This switches off after a time  
delay, once the doors concerned  
have been closed correctly;  
– lighting switches off immediately.  
3.27  
INTERIOR LIGHTING (3/3)  
9
8
8
Glove box light  
Luggage compartment light  
Depending on the vehicle, the 8 light  
switches on when the cover is opened.  
Light 9 comes on when the luggage  
compartment is opened.  
Unlocking and opening the doors or  
tailgate switches on the timed cour-  
tesy lights and lights.  
3.28  
PASSENGER COMPARTMENT STORAGE, FITTINGS (1/4)  
2
3
1
Front door storage pockets 1  
They can hold a 1.5-litre bottle.  
Sun blind storage  
compartment 2  
This can be used for storing motorway  
tickets, cards, etc.  
Centre console storage  
compartment/induction  
charging zone 3  
For more information on the induction  
charging zone, please refer to the mul-  
timedia instructions.  
Nothing should be placed  
on the floor area in front of  
the driver as such objects  
may slide under the pedal  
during braking manoeuvres, thus  
obstructing its use.  
Ensure that no hard, heavy  
or pointed objects are  
placed in the “open” storage  
compartments in such a  
way that they may fall onto passen-  
gers during sudden turning, braking  
or in the event of an accident.  
3.29  
PASSENGER COMPARTMENT STORAGE, FITTINGS (2/4)  
4
7
8
6
5
Centre console storage  
compartment 4/ induction  
charging zone 5  
Passenger storage  
compartment  
Pull handle 6 to open it.  
Passenger storage drawer  
To open, press the button 7 to unlock  
the drawer and pull the handle 8.  
For more information on the induction  
charging zone, please refer to the mul-  
timedia instructions.  
The glove box can hold A4-sized docu-  
ments, a bottle etc.  
Ensure that no hard, heavy  
or pointed objects are  
placed in the “open” storage  
compartments in such a  
way that they may fall onto passen-  
gers during sudden turning, braking  
or in the event of an accident.  
3.30  
PASSENGER COMPARTMENT STORAGE, FITTINGS (3/4)  
10  
11  
9
12  
Centre armrest storage  
Cup holders 12  
compartment 11  
Lift the cover 9 of the sliding armrest by  
pressing the 10 button.  
Depending on the vehicle, the cup  
holder may be equipped with retaining  
hooks to keep the cup in place.  
This can be used to store a mobile ash-  
tray, drink cans, etc.  
When turning corners,  
accelerating or braking,  
ensure that the recepta-  
cle being held by the cup  
holder is not dislodged.  
There is a risk of injury if hot  
liquid escapes.  
3.31  
PASSENGER COMPARTMENT STORAGE, FITTINGS (4/4)  
15  
14  
13  
Rear door storage  
Rear seat storage pockets 14  
Grab handle 15  
compartment 13  
They can hold a 0.5-litre bottle.  
This offers support and can be held  
when the vehicle is moving.  
Do not use it for getting into or out of  
the vehicle.  
Ensure that no hard, heavy  
or pointed objects are  
placed in the “open” storage  
compartments in such a  
way that they may fall onto passen-  
gers during sudden turning, braking  
or in the event of an accident.  
3.32  
ACCESSORIES SOCKET  
1
1
Accessories socket 1  
You can use the 1 socket. It is provided  
for connecting accessories approved  
by our Technical Department.  
Connect accessories with  
a
maximum power of  
120 watts (12 V) only.  
When several accessory  
sockets are used at the same time,  
the total power of the connected  
accessories must not exceed  
180 watts.  
Fire hazard.  
3.33  
REAR HEAD RESTS  
2
1
When the headrest is set at the  
lowest position, this is for storage  
only. It should not be in this position  
when a seat is occupied.  
Position for use  
Lift the headrest fully until it locks.  
To refit the headrest  
Enter the rods in their housing and  
push down the headrest until it locks to  
use it in the high position.  
Check that the bonnet is correctly  
locked.  
Check that the bonnet is correctly  
locked.  
To remove the headrest  
Raise the headrest as far as it will go,  
then press button 1 and remove the  
headrest.  
Folding positions 2 for the  
headrest  
Press the button 1 and lower the head-  
rest completely.  
The headrest is a safety  
component; check that it is  
fitted and in the correct po-  
sition.  
3.34  
REAR BENCH SEAT: functions (1/2)  
Pull the vane 1 and lower the seat-  
back B.  
1
A
Note: for safety reasons, the seat-  
back B is equipped with a retaining  
system. You may experience resist-  
ance when handling.  
B
To replace the seatback, proceed in  
the reverse order to removal.  
Raise the seatback again until it reaches  
the locking joint of the seatback.  
Be careful not to jam the safety strap  
between the backrest and the parcel  
shelf.  
Check the operation of the seat belt.  
To fold down the seatback  
Ensure that the front seats are far  
enough forward.  
Before folding down a seatback:  
– lower the headrest fully;  
When refitting the seat-  
back, make sure it is cor-  
rectly locked in place.  
– place the seat belt in the belt guide A  
and buckle the seat belt. This pre-  
vents the seat belt from locking when  
the seatback is lifted up again.  
If seat covers are fitted,  
make sure these do not prevent the  
seatback latch from locking in.  
Make sure that the seat belts are  
positioned correctly.  
Reposition the headrests.  
Before moving the seatback, put  
the seat belt in belt guide A to avoid  
damaging it.  
3.35  
REAR BENCH SEAT: functions (2/2)  
2
To move forwards or  
backwards  
Lift the lever 2 from the rear seats to  
unlock the bench seat.  
Move the seat forwards or back to the  
required position.  
For safety reasons, carry  
out any adjustments when  
the vehicle is not being  
driven.  
Release the lever 2 and ensure that the  
bench seat is properly locked.  
When moving the rear  
seats, ensure that nothing  
obstructs the anchorage  
points (passenger’s arm or  
leg, a pet, gravel, cloth, toys, etc.).  
3.36  
BOOT  
2
3
1
To open  
Press the 1 button to open the luggage  
Opening the doors manually  
from the inside  
compartment lid a few centimetres.  
If it is impossible to unlock the tailgate,  
it can be done manually from inside:  
Lift the luggage compartment lid.  
– access the luggage compartment by  
tilting the rear bench seatback(s),  
To close  
Lower the tailgate using the handles 2  
inside the tailgate to help you.  
– insert a pencil or similar object in  
recess 3 and slide the unit as shown  
in the illustration;  
The attaching of any carry-  
ing device (bike rack, lug-  
gage box etc.) resting on  
the luggage compartment  
lid is prohibited. To install a carrying  
device on your vehicle, contact an  
Approved Dealer.  
– push the tailgate to open it.  
3.37  
REAR PARCEL SHELF  
1
A
2
2
Removal  
– Unhook the two straps 1 of the door  
of the boot;  
– lift the shelf 2 to unclip it (move-  
ment A);  
– pull the shelf towards you.  
To refit, proceed in the reverse order to  
removal.  
Do not place any heavy or  
hard object on the parcel  
shelf. These may pose a  
risk to the vehicle occu-  
pants if the driver has to brake sud-  
denly or if the vehicle is involved in  
an accident.  
3.38  
BOOT ARRANGEMENTS  
1
1
2
1
3
Intermediate position  
Storage position  
(depending on the vehicle)  
Mobile floor 1  
In the blocked position, it allows you to  
access the tools stored under the boot  
carpet.  
Flat position  
This allows for more space to store  
things in the boot.  
Enables you to flatten the floor by fold-  
ing down the back of the rear bench  
seat and to compartmentalise the boot  
into two distinct spaces.  
– Remove the mobile floor 1;  
– Remove the mobile floor 1;  
– position it in the luggage compart-  
ment, using the 2 runners provided.  
– move the rear seat forwards using the  
lever located beside the rear seats  
➥ 3.35;  
The mobile floor is positioned on the  
runner 2.  
– place the mobile floor 1 in the luggage  
compartment, under the runner 2.  
If necessary, remove the inflation kit 3  
before placing the false floor in the  
lower position.  
Maximum weight for the mobile  
floor: 100 kg evenly distributed.  
3.39  
TRANSPORTING OBJECTS IN THE LUGGAGE COMPARTMENT  
Always position the objects transported  
so that the largest surface is against:  
– the rear bench seatback, for normal  
A
loading (example A);  
1
1
– the front seatbacks with the rear seat-  
B
backs folded down, as is the case for  
maximum loads (example B).  
Always position the heav-  
iest items directly on the  
floor.  
Ensure that the objects being trans-  
ported are evenly distributed throughout  
the loading area.  
Use the lashing points 1 on  
the boot floor, if these are fitted to  
the vehicle.  
If you have to place objects on the folded  
seatback, it is necessary that you lower  
the headrests before folding the seat-  
back so that it can be folded as flat as  
possible against the seat.  
The luggage should be loaded in  
such a way that no items will be  
thrown forward and strike the occu-  
pants if the driver has to brake sud-  
denly.  
Note: in the absence of an emergency  
spare wheel or tyre inflation kit, do not  
load the bottom of the luggage compart-  
ment.  
Fasten the rear seat belts, even if  
the seats are not occupied.  
3.40  
TRANSPORTING OBJECTS towbar  
A
Permissible nose weight, maxi- -  
mum permissible towing weight  
braked and unbraked: ➥ 6.9.  
Choice and fitting of towing  
equipment  
Maximum weight of towing equip-  
ment:  
– 10 kg on a vehicle with towing  
pre-equipment;  
Maximum dimension A: 837 mm.  
– 28 kg on a vehicle without towing  
pre-equipment.  
It is not permitted to fit a mechanical  
towing device (ball, hook, etc.) that  
is removable without tools or retract-  
able if it cannot be easily removed  
or repositioned when not in use.  
Any towing device must not ob-  
struct any lighting component or  
the number plate when not in use.  
Mechanical towing devices (ball,  
hook, etc.) which can be removed  
without tools or which are retract-  
able must be removed or reposi-  
tioned when they are not in use.  
For fitting and conditions of use,  
refer to the equipment’s fitting in-  
structions.  
Please keep these instructions with  
the rest of the vehicle documenta-  
tion.  
In all cases, you must comply with  
the regulations of the particular  
country you are in.  
3.41  
ROOF BARS, SPOILER (1/2)  
1
3
2
For information on the range of  
equipment adapted to your vehi-  
cle, we advise you to consult an ap-  
proved Dealer.  
Refer to the fitting instructions for in-  
formation on how to fit roof bars and  
conditions of use.  
Vehicles not fitted with longitudinal  
roof bars  
Accessing the mounting  
points  
Please keep these instructions with  
the rest of the vehicle documenta-  
tion.  
Open the doors to access the fixing  
points 3.  
Vehicles fitted with longitudinal roof  
bars  
Maximum permissible load on  
roof rack ➥ 6.9.  
The attachment inserts 2 are located on  
the longitudinal roof bars 1.  
If original roof bars, ap-  
proved by our Technical  
Department, are supplied  
with screws, only use these  
screws for attaching the roof bars to  
the vehicle.  
3.42  
ROOF BARS, SPOILER (2/2)  
Precautions during use  
Handling the tailgate  
A
Before handling the tailgate, check the  
objects and/or accessories (bike rack,  
roof box, etc.) fitted to the roof bars:  
these must be correctly positioned and  
secured, so as not to hinder the opera-  
tion of the tailgate.  
Spoiler A  
It is prohibited to attach any  
carrying equipment (bike  
rack, luggage box etc.)  
resting against the spoiler  
or tailgate. To install a carrying  
device on your vehicle, contact an  
Approved Dealer.  
3.43  
3.44  

Related Topics

Multi-Sense Air vents, air outlets Automatic climate control Multimedia equipment Electric windows Electric sunroof Sun visor Interior lighting Accessories socket Rear head rests Boot Rear parcel shelf Boot arrangements Transporting objects in the luggage compartment Roof bars, spoiler

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot