REAR HEAD RESTS
2
1
When the headrest is set at the
lowest position, this is for storage
only. It should not be in this position
when a seat is occupied.
Position for use
Lift the headrest fully until it locks.
To refit the headrest
Enter the rods in their housing and
push down the headrest until it locks to
use it in the high position.
Check that the bonnet is correctly
locked.
Check that the bonnet is correctly
locked.
To remove the headrest
Raise the headrest as far as it will go,
then press button 1 and remove the
headrest.
Folding positions 2 for the
headrest
Press the button 1 and lower the head-
rest completely.
The headrest is a safety
component; check that it is
fitted and in the correct po-
sition.
3.34
English 
