REAR LIGHTS AND SIDE LIGHTS: replacing the bulbs (1/3)
1
2
3
5
4
– release the light assembly from out-
side the vehicle by pulling towards
the rear;
Refitting
LED side light/brake light 1
Consult an approved dealer
To refit, proceed in the reverse order,
taking care not to damage the wiring.
– remove the 4 bulb holder by un-
screwing it a quarter of a turn, then
replace the bulb.
Direction indicators 5
– Open the boot;
Bulb type: WY16W.
– remove the trim 2;
– unscrew the nut 3;
The bulbs are under pres-
sure and can break when
replaced.
To comply with current legislation, or
as a precaution, you can obtain an
emergency kit from your approved
dealer containing a set of spare
bulbs and fuses.
Risk of injury.
5.15
English 
