Get Getting to know your vehicle -> Front seats Guide for Renault Megane SUV Third Generation (2009-2016)

fRONT sEATs WITH mANUAL cONTROL (1/2)

To tilt the seatback

Turn control knob 3 to the required po-

sition.

3

4

Heated seats

(depending on vehicle)

2

1

With the engine running, turn control 4

to either position 1, 2 or 3 (depending

on the temperature required). An in-

dicator light on the instrument panel

lights up once the front seat heating

system is operating.

The system, which has a thermostat,

decides whether or not the heating is

needed, according to the position se-

lected.

To move the seat forwards or

back

Lift handle 1 to release. Release the

handle once the seat is in the correct

position and ensure that the seat is fully

locked into position.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

We would advise you not to recline

the seatbacks too far to ensure that

the effectiveness of the seat belts is

not reduced.

To raise or lower the seat

base

Move lever 2 as many times as neces-

sary upwards or downwards.

Nothing should be placed on the

floor (area in front of driver) as such

objects may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

1.17

fRONT sEATs WITH mANUAL cONTROL (2/2)

5

6

To adjust the lumbar support

on the driver’s seat:

Lower handle 5 to increase the support

and lift to decrease it.

Table function

Depending on the vehicle, the passen-

ger seatback may be folded down onto

the seat base to create a table.

When the front seat is in

table position, the front pas-

senger air bag must be dis-

abled (see information on

“Child safety: activating/deactivat-

ing the front passenger air bag” in

Section 1).

Lower the headrest, move the seat

back, tilt handle 6 and completely lower

the seatback.

Risk of serious injury caused by

items resting on the seatback table

which may be dislodged when the

air bag is deployed.

The label (on the dashboard) and

the markings (on the windscreen)

remind you of these instructions.

For your safety, attach any

transported objects when

the seat is in the table po-

sition.

1.18

fRONT sEATs WITH ELEcTRIc cONTROL

Switch 3 is used for adjusting the seat-

back and switch 4 is used for adjusting

the seat squab.

On equipped vehicles, buttons 1 are

used to store the chosen driving posi-

tion (refer to the following page).

1

2

5

Adjusting the seat squab:

– To move the seat forwards or back

Move switch 4 forwards or back-

wards.

3

– To raise or lower the seat base

Move the switch 4 upwards or down-

wards.

4

Adjusting the seatback:

To tilt the seatback, move the top of

switch 3 forwards or backwards.

Adjusting the lumbar support

on the driver’s seat:

Lower handle 5 to increase the support

and lift to decrease it.

Heated seats

We would advise you not

to recline the seatbacks too

far to ensure that the effec-

tiveness of the seat belts is

(depending on vehicle)

With the engine running, turn control 2

to either position 1, 2 or 3 (depending

on the temperature required). An in-

dicator light on the instrument panel

lights up once the front seat heating

system is operating.

The system, which has a thermostat,

decides whether or not the heating is

needed, according to the position se-

lected.

not reduced.

Nothing should be placed on the

floor (area in front of driver) as such

objects may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

1.19

fRONT sEATs WITH ELEcTRIc cONTROL WITH sTORAgE Of sETTINgs

It is possible to store three driving po-

sitions.

Recalling a stored driving

position

A driving position includes the settings

for the seat base and seatback of the

driver’s seat.

With the vehicle stationary, briefly

press button 1, 2 or 3 depending on the

required stored driving position.

3

2

5

1

Note: recall of the stored driving po-

sition is interrupted if one of the seat

adjustment buttons is pressed during

recall.

The system operates:

– with the “hands-free” card de-

tected or, depending on the vehicle,

RENAULT card in the card reader;

4

When driving, it is not possible to

recall a driving position.

– when the driver’s door is opened.

storing your driving position

– Adjust the seat using switches 4

and 5 (see previous page);

– press one of buttons 1, 2 or 3 until a

beep is heard: the driving position is

stored;

We would advise you not

to recline the seatbacks too

far to ensure that the effec-

tiveness of the seat belts is

not reduced.

– to store other driving positions repeat

this procedure with the other but-

tons.

Nothing should be placed on the

floor (area in front of driver) as such

objects may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

1.20

fRONT sEATs: AccEss TO REAR sEATs

When a person, an object or a child

seat prevents the front seats from lock-

ing, perform the following operations:

– ask all of the passengers to leave

the vehicle and remove any bulky

objects from the rear seats;

1

2

– lock the seat(s) in the initial position

again;

– move the seat(s) forwards in order to

create sufficient space;

– ask the passengers to get back into

the vehicle, and refit the child seat or

objects on the rear seats.

Electrically controlled seats

Lift handle 1 and tilt the seatback com-

pletely: the seat moves forward.

Three door version

manually controlled seats

Lift handle 1 and slide the seat for-

ward.

Check that no object or

person prevents the front

seat from locking. If so,

To bring the seat into position, bring the

seatback into position. The seat returns

to its original position.

remove any obstacles

To bring the seat into position, bring the

seatback into position.

behind the front seats. Adjust the

seat to allow sufficient room in the

rear. The rear occupants/objects

should then return to the vehicle.

Repeat the above until the seat is

locked correctly.

Risk of seat moving on its runners

during vehicle acceleration or brak-

ing.

Do not move handle 1 and handle 2

at the same time.

1.21

Getting to know your vehicle -> Front seats for Your Renault Megane SUV Third Generation (2009-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals