vEHIcLE sETTINgs cUsTOmIsATION mENU
1
Once a line has been selected, keep
pressing either button 2 or 3 to change
the function: If you select either “Parking
sensor volume” or “LANGUAGE”, you
will be given a new choice of options
(parking distance control volume or in-
strument panel language). In this case,
make your selection and confirm it by
holding either button 2 or 3, the value
2
3
selected is shown by a
of the line.
~
in front
To exit the menu, select “EXIT” or
“BACK” then confirm by holding either
button 2 or 3. It may be necessary to
carry out this operation several times.
On equipped vehicles, this function,
Adjusting the settings
which is integrated in the trip compu-
ter and warning system 1, allows you
to activate/deactivate some of the vehi-
cle’s functions.
Press one of buttons 2 or 3 to select a
function to change:
a) Auto door locking while driving;
b) Unlock driver’s door only;
c) Auto rear wipe with reverse gear;
d) Auto dipped-beam headlights;
e) Front parking sensor;
Accessing the settings
customisation menu
f) Rear parking sensor;
The vehicle settings customisation
menu cannot be used when driving.
Atspeedsofabove12mph(20km/h)
for vehicles with a manual gearbox
(0 mph for vehicles with an auto-
matic gearbox), the on-board dis-
play returns automatically to the
trip computer and warning system
mode.
g) Parking sensor volume ;
h) LANGUAGE.
With the vehicle stationary, press either
button 2 or 3 untilthemessage“Settings
menu: press and hold” appears on dis-
play 1. Press either button 2 or 3 for
longer than 2 seconds to enter the
menu.
=
<
function activated
function deactivated
1.66
English 
