STARTING THE ENGINE
Note:
- if any one of the starting
conditions is not applied, the
1
message “brake
+
start” is
displayed on the instrument
panel.
- in some cases it will be necessary
to move the steering wheel while
pressing start button 3 to assist in
unlocking the steering column; a
message on the instrument panel
“Steering not unlocked” warns of
this.
3
4
2
Remote control RENAULT card
Starting conditions.
The message “Insert card” appears
Follow the starting instructions on
the instrument panel describing
the following conditions:
on trip computer display 1.
Insert the RENAULT card fully
into card reader 2.
Press the brake or clutch pedal
(you must continue to press the
pedal throughout the entire
starting phase) and press button 3.
If a gear is engaged, the engine can
only be started if the clutch pedal
is pressed.
Hands-free RENAULT card
The card must be within the
detection zone
4
(passenger
compartment and boot, but
excluding some elevated areas
such as sun visors, spectacle
holder, top of dashboard, etc.).
Special note for vehicles with
automatic transmission: depress
the brake pedal with the lever in
position N or P.
2.03
English 
