FUSES (1/2)
B
1
A
Fuse box
Tweezers 1
If any electrical component does not
work, check the condition of the fuses.
Remove the fuse using tweezers 1, lo-
cated at the back of flap A or B.
Unclip cover A or B (depending on ve-
hicle).
To remove the fuse from the tweezers,
slide the fuse to the side.
Check the fuse in question
and replace it, if neces-
sary, by a fuse of the same
rating.
It is not advisable to use the free fuse
locations.
If a fuse is fitted where the rating is
too high, it may cause the electrical
circuit to overheat (risk of fire) in the
event of an item of equipment using
an excessive amount of current.
It may be necessary to use clips
to remove and replace the fuses.
These can be purchased at an au-
thorised dealer.
To comply with current legislation, or
as a precaution, you can obtain an
emergency kit from your approved
dealer containing a set of spare
bulbs and fuses.
5.25
English 
