Get Your comfort Guide for Renault Scenic 4 Door Fourth Generation (2017-2022)

Section 3: Your comfort

Multi-Sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual air conditioning, heating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Automatic climate control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2

3.4

3.6

3.9

Air conditioning: information and advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.19

Multimedia equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.21

Outside air quality function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.23

Electric windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.24

Fixed glass roof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.26

Interior lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.27

Sun visor, blinds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.29

Passenger compartment storage, fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.30

Accessories socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.38

Ashtray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.38

Cigarette lighter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.38

Rear headrests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.39

Rear seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.40

Luggage compartment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.46

Rear parcel shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.47

Luggage cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.48

Luggage compartment storage space and fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.49

Transporting objects in the luggage compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.51

Transporting objects: towbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.52

Luggage net. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.53

Roof bars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.56

3.1

MULTI-SENSE (1/2)

The Multi-Sense system enables once

of five modes to be selected which, de-

pending on the vehicle, affect the drive,

the light environment, the comfort and

the engine noise:

– modes Comfort, Neutral, Eco and

Sport are preset and associated with

customisable light environments and

engine noise;

Mode Eco

Multi-Sense

Comfort

Sport

Neutral

Eco

Perso

Mode Eco is geared towards saving

energy and the environment. The

steering is smooth, engine and gearbox

management enable fuel consumption

to be lowered. Air conditioning is man-

aged to be used only when necessary.

Please refer to the information on

“Driving advice, Eco-driving” in

Section 2.

– mode Perso is fully customisable.

The drive modes affect the:

– power-assisted steering;

– engine and gearbox responsiveness;

– heating level.

They also affect the:

– passenger compartment and instru-

ment panel lighting;

– the information on the instrument

panel and multimedia screen;

– engine noise;

Mode Comfort

This mode favours smooth steering.

The interior environment is softened.

– massage seat.

Mode Neutral

Default mode, mode Neutral selects the

vehicle factory settings.

Every time it starts, the vehicle can start

in the current mode or in Neutralmode.

In any mode, you can change the

colour of the ambient lighting as well

as the format of the information dis-

played on the instrument panel and

multimedia screen.

You can also reset to the default set-

tings.

3.2

MULTI-SENSE (2/2)

Sport mode

This mode enables an increased re-

sponsiveness from the engine and the

gearbox. The steering is firmer.

1

Mode Perso

This mode enables you to manually

configure the drive, light environment

and, depending on the vehicle, the

comfort and engine noise.

3

2

Accessing the menu

You can access Multi-Sense, depend-

ing on the vehicle:

– from the multimedia screen 1. Select

menu “Vehicle” then “Multi-Sense”;

– using switch 2;

– using button Eco 3 which automati-

cally launches Eco mode and opens

the “Multi-Sense” menu on the multi-

media screen 1 for a few seconds.

Stopping the engine in Sport

mode, or Perso mode with

engine setting in Sport mode.

Depending on the vehicle, when you

restart the vehicle, a message asks

you if you wish to keep the engine

setting in Sport mode.

3.3

AIR VENTS: air outlets (1/2)

1

2

3

4

1

2

1 side window demister outlets

2 side air vents

3 windscreen demister outlet

4 centre air vents

5 passenger footwell heater outlets

6

7

multifunction screen

rear air vents

6

5

7

5

7

3.4

AIR VENTS: air outlets (2/2)

8

10

9

To remove bad odours from your ve-

hicles, only use the systems designed

for this purpose. Consult an approved

Dealer.

Front seats

2nd row rear seats

Direction

Output/direction

Up/down: lower or raise tabs 8.

Move the cursor 10:

– downwards to decrease the air flow

and direct it downwards;

Air flow

Turn control knob 9.

To fully close, turn beyond the point of

resistance.

– upwards to increase the air flow and

direct it upwards;

– to the right or left.

Do not add anything to the

vehicle’s ventilation circuit

(for example, to remove

bad odours).

There is a risk of damage or of

fire.

3.5

MANUAL AIR CONDITIONING (1/3)

A

1

2

3

5

4

8

10

9

11

7

6

The controls

1 Air temperature adjustment/”Clear

Indicators

The following indicators are displayed

Switching air conditioning on

or off

View” function

on the multimedia screen A:

The air conditioning is switched on (in-

dicator light on) or off (indicator light off)

using the control 3.

2 De-icing/demisting of the rear screen

and, depending on the vehicle, the

door mirrors.

8 Air temperature.

9 Active mode.

10Fan speed.

The air conditioning system is used

for:

3 Air conditioning.

4 Air recirculation.

11 Distribution of air in the passenger

– lowering the temperature inside the

passenger compartment;

compartment.

5 Adjusting air distribution in the pas-

senger compartment.

– eliminating condensation more

quickly.

6 Adjusting the ventilation fan speed.

7 Adjusting the ventilation speed and

stopping the system.

3.6

MANUAL AIR CONDITIONING (2/3)

Distribution of air in the

passenger compartment

There are five air distribution options.

Turn control 5 to choose the distribution

option.

5

1

2

The air distribution is displayed on the

multimedia screen.

The air flow is directed to the

windscreen and the front side

window demisting vents.

õ

The air flow is distributed be-

tween all the air vents, the

front side window demisting vents, the

windscreen demisting vents and the

footwells.

÷

Adjusting the air temperature

Rear screen de-icing/

demisting

With the engine running, press the

control 2. The operating tell-tale comes

on.

The air flow is directed mainly

towards the footwells.

Turn control 1 to obtain the desired

temperature. The more bars are dis-

played on the multimedia screen, the

higher the temperature.

ó

G

The air flow is directed towards

the dashboard air vents, the

front footwells and, depending on the

vehicle, the second row footwells.

When the air conditioning system is

used for long periods, it may begin to

feel cold. To increase the temperature,

turn control 1 to the right.

This function permits rapid demisting/

de-icing of the rear screen and de-icing

of the door mirrors (on equipped vehi-

cles).

All the air flow is directed to the

dashboard vents.

J

To exit this function, press the con-

trol 2 again.

Demisting automatically stops.

3.7

MANUAL AIR CONDITIONING (3/3)

Varying the ventilation speed

You can adjust the fan speed by press-

ing the controls 6 or 7 to increase or

reduce the fan speed.

1

4

The system is deactivated (OFF): the

ventilation speed is zero (vehicle sta-

tionary). You can, however, still feel

a slight flow of air when the vehicle is

moving.

Stopping the system

7

6

To switch off the system, press the

control 7 several times until the mes-

sage “OFF” appears on the multimedia

screen.

Clear View function

Switching the air

recirculation on

You may, however, feel a slight flow of

air when the vehicle is moving.

Press the control 1: the integrated indi-

cator light in the button comes on.

This function quickly demists and de-

ices the windscreen, the rear screen,

the front side windows, and the exte-

rior rear view mirrors (depending on the

vehicle). The air conditioning and rear

screen de-icing functions must be ac-

tivated.

Press the control 4: the integrated in-

dicator light in the button comes on.

Under these conditions, air is taken

from the passenger compartment and

is recirculated, with no air being taken

from outside the vehicle. Air recircula-

tion operates as follows:

– isolating the vehicle from the exter-

nal atmosphere (driving in polluted

areas, etc.);

– lowering the passenger compart-

ment temperature as quickly as pos-

sible.

Prolonged use of air recirculation can lead to condensation forming on the side windows and windscreen, and discomfort due

to the use of non-renewed air in the passenger compartment. We therefore advise you to return to normal mode (external air)

as soon as the air recirculation function is no longer required, by pressing the control 4 again.

3.8

AUTOMATIC CLIMATE CONTROL: Controls A (1/5)

Automatic mode

1

Climate

10

8

9

The automatic climate control system

guarantees comfort in the passen-

ger compartment and good visibility

(except in the event of extreme condi-

tions), while optimising consumption.

The system controls the ventilation

speed, air distribution, air recirculation,

and starting and stopping the air condi-

tioning and air temperature.

A

19

11

12

18

17

16

15

14

13

2

7

This mode consists of a choice of three

programmes:

NORMAL : allows the selected comfort

level to be best attained, depending on

the exterior conditions. Press button 4

or key 9.

5

6

13

4

3

11 and 18 Ventilation speeds.

Controls A

12 Passenger compartment air distri-

Press zone 14 to access the multifunc-

tion screen controls 1. The presence of

the controls detailed below will depend

on the vehicle model.

SOFT: reaches the desired comfort

level more gently and silently. Press

button 8.

bution.

13 Right and left temperature display.

FAST: increases the flow of air in the

passenger compartment. This mode

is recommended in particular to opti-

mise comfort in the rear seats. Press

button 10.

14 Zone displaying air conditioning set-

2 and 7 Left and right temperature indi-

tings.

cation adjustment.

15 “DUAL” function.

3 De-icing/demisting of the rear screen

and, depending on the vehicle, the

door mirrors.

16 “Automatic recirculation” function.

17 Air conditioning.

4, 8, 9 and 10 automatic modes

5 Air recirculation.

19 Stopping the system.

6 “Clear View” function.

Some buttons have a warning light

indicating their operative state.

3.9

AUTOMATIC CLIMATE CONTROL: Controls A (2/5)

Note: the air conditioning configura-

tion depends on the mode selected in

the “Multi-Sense” menu (please refer

to the information on “Multi-Sense” in

Section 3).

Climate

10

8

9

19

18

20

11

7

2

15

14

4

The displayed temperature values

show a comfort level.

Varying the ventilation speed

In automatic mode, the system uses

the most suitable amount of air to reach

and maintain the desired comfort level.

Temperature adjustment

There are two types of settings:

– uniform passenger compartment

setting;

– DUAL function setting to independ-

ently adjust the left and right sides.

When starting the engine, increas-

ing or decreasing the value dis-

played will not allow the com-

fort level to be reached any more

quickly. The system will always op-

timise the temperature increase or

decrease (the ventilation system

does not start instantly at maximum

speed: it gradually increases). This

may take several minutes.

You can still adjust the ventilation speed

by pressing buttons 11 or 18 or by slid-

ing your finger in zone 20.

Uniform passenger compartment

setting

Use control 7.

DUAL function setting

Press button 15 to activate. Use con-

trol 7 to adjust the left side and control 2

for the right side.

Generally speaking, unless there is

a particular reason not to, the dash-

board air vents should remain open.

3.10

AUTOMATIC CLIMATE CONTROL: Controls A (3/5)

To exit this function, press either:

– button 4;

Climate

8

9

10

– again button 6;

– on button 8, 9 or 10.

20

11

18

6

4

3

Press button 6 – the integrated indica-

tor light comes on.

Clear View function

This function quickly demists and de-

ices the windscreen, the rear screen,

the front side windows, and the door

mirrors (depending on the vehicle). It

imposes automatic operation of the

air conditioning and rear screen de-ic-

ing and, depending on the vehicle, the

windscreen electric de-icer.

Press button 3 to stop the heated rear

screen operating, and the integrated in-

dicator goes out.

To adjust the ventilation speed: press

buttons 11 or 18 or slide your finger in

zone 20.

3.11

AUTOMATIC CLIMATE CONTROL: Controls A (4/5)

Rear screen de-icing/

demisting

Climate

8

9

10

Press button 3 – the integrated indica-

tor light comes on. This function en-

ables rapid demisting or de-icing of the

rear screen and de-icing of the door

mirrors (on equipped vehicles).

19

To exit this function, press button 3

again. Demisting automatically stops.

17

14

4

3

Switching air conditioning on

or off

In automatic mode, the system switches

the air conditioning system on or off,

depending on the climate conditions.

Stopping the system

Press button 19 to activate or deacti-

vate the system (the operating warn-

ing light on button 19 notifies you of the

system status).

Press button 17 to:

– activate the air conditioning (a warn-

ing light in zone 14 comes on);

It is preferable to use one of the automatic programmes NORMAL, SOFT or

FAST.

– deactivate the air conditioning (the

warning light in zone 14 goes out).

In automatic mode (4 warning light is lit), all air conditioning functions are control-

led by the system.

You can still change the selection made by the system. In this case, the indicator

light for button 4 goes out.

To return to automatic mode, press one of the programmes NORMAL 9, SOFT 8

or FAST10 or the button 4.

3.12

AUTOMATIC CLIMATE CONTROL: Controls A (5/5)

Automatic usage

Climate

Press button 16 (a warning light comes

on in zone 14).

Manual use

Press button 5 to force air recirculation.

Prolonged use of this position may lead

to odours, caused by non-renewal of

air, and the formation of condensation

on the windows.

16

12

We advise you to return to automatic

mode as soon as air recirculation is no

longer needed, by pressing key 16 or

button 5 again.

14

5

To exit this function, press key 16 or

button 5 again.

Adjusting the distribution

of air in the passenger

compartment

Press buttons 12 to select the desired

distribution (a warning light is displayed

in zone 14):

Air recirculation

This function is managed automatically

but you can also activate it manually.

Note:

– during recirculation, air is taken from

the passenger compartment and

is recycled, with no air being taken

from outside the vehicle;

The air flow is mainly directed

to the demisting vents for the

windscreen and the side windows.

Ø

– air recirculation allows the exter-

nal atmosphere to be cut off (when

driving in polluted areas, etc.) and

to cool the passenger compartment

temperature more quickly.

The air flow is mainly directed

to the dashboard air vents.

½

¿

The air flow is directed mainly

towards the footwells.

The demisting/de-icing will still take

priority over the air recirculation.

3.13

AUTOMATIC CLIMATE CONTROL: Controls B and C (1/5)

Automatic mode

1

C

B

2

3

The automatic climate control system

guarantees comfort in the passen-

ger compartment and good visibility

(except in the event of extreme condi-

tions), while optimising consumption.

The system controls the ventilation

speed, air distribution, air recirculation,

and starting and stopping the air condi-

tioning and air temperature.

2

3

4

5

18

17

16

7

12

11

13 14 15

17

11

10

18

16

7

15

12 13 14

This mode consists of a choice of three

programmes:

10

6

AUTO: allows the selected comfort

level to be best attained, depending

on the exterior conditions. Press the

button 15.

9

8

9

8

Controls B and C

Indicators

5 and 11 Left and right temperature in-

dication adjustment.

6 De-icing/demisting of the rear screen

and, depending on the vehicle, the

door mirrors.

7 Passenger compartment air distribu-

tion.

8 “Automatic recirculation” function.

9 Air recirculation.

The following indicators are displayed

on the screen 3:

SOFT: reaches the desired comfort

level more gently and silently. Press the

button 14.

1 Active mode, ventilation speed and

air distribution in the passenger com-

partment (temporary display after

pressing the associated controls).

FAST: increases the flow of air in the

passenger compartment. This mode is

recommended in particular to optimise

comfort in the rear seats. Press the

button 16.

2 Outside air temperature.

4 Air temperature, left and right.

10 “Clear View” function.

12 and 18 Ventilation speeds.

13

“DUAL" function.

14, 15, and 16 Automatic modes.

17 Air conditioning.

Some buttons have a warning light

indicating their operative state.

3.14

AUTOMATIC CLIMATE CONTROL: Controls B and C (2/5)

Note: the air conditioning configura-

tion depends on the mode selected in

the “Multi-Sense” menu (please refer

to the information on “Multi-Sense” in

Section 3).

5

18

12

11

13

11

18

5

12 13

19

The displayed temperature values

show a comfort level.

Varying the ventilation speed

In automatic mode, the system uses

the most suitable amount of air to reach

and maintain the desired comfort level.

Temperature adjustment

There are two types of settings:

– uniform passenger compartment

setting;

– “DUAL” function setting to independ-

ently adjust the left and right sides.

When starting the engine, increas-

ing or decreasing the value dis-

played will not allow the com-

fort level to be reached any more

quickly. The system will always op-

timise the temperature increase or

decrease (the ventilation system

does not start instantly at maximum

speed: it gradually increases). This

may take several minutes.

You can still adjust the ventilation

speed by pressing buttons 12 or 18 or,

depending on the vehicle, by sliding

your finger in zone 19.

Uniform passenger compartment

setting

Use control 11.

“DUAL” function setting

Press button 13 to activate. Use con-

trol 11 to adjust the left side and con-

trol 5 for the right side.

Generally speaking, unless there is

a particular reason not to, the dash-

board air vents should remain open.

3.15

AUTOMATIC CLIMATE CONTROL: Controls B and C (3/5)

To exit this function, press either:

– again button 10;

– one of the buttons 14, 15 or 16.

18

16

15

12

14

18

16

15

19

12

14

10

6

Press button 10 – the integrated indica-

tor light comes on.

Clear View function

This function quickly demists and de-

ices the windscreen, the rear screen,

the front side windows, and the door

mirrors (depending on the vehicle). It

imposes automatic operation of the

air conditioning and rear screen de-ic-

ing and, depending on the vehicle, the

windscreen electric de-icer.

Press button 6 to stop the heated rear

screen operating, and the integrated in-

dicator goes out.

To adjust the ventilation speed: press

buttons 12 or 18 or slide your finger in

zone 19.

3.16

AUTOMATIC CLIMATE CONTROL: Controls B and C (4/5)

Rear screen de-icing/

demisting

1

Press button 6 – the integrated indica-

tor light comes on. This function en-

ables rapid demisting or de-icing of the

rear screen and de-icing of the door

mirrors (on equipped vehicles).

1

To exit this function, press button 6

again. Demisting automatically stops.

15 16 17

14

17

16

12

14 15

12

6

Switching air conditioning on

or off

In automatic mode, the system switches

the air conditioning system on or off,

depending on the climate conditions.

Stopping the system

To switch the system off, press

button 12 repeatedly until the message

OFF appears in zone 1.

Press button 17 to:

– activate the air conditioning (a warn-

ing light in zone 1 comes on);

It is preferable to use one of the automatic programmes AUTO, SOFT or

FAST.

– deactivate the air conditioning (the

warning light in zone 1 goes out).

In automatic mode (indicator light on button 14, 15 or 16 lit), all air conditioning

functions are controlled by the system.

You can still change the selection made by the system. In this case, the indicator

light for button 14, 15 or 16 goes out.

To return to automatic mode, press one of programmes AUTO 15, SOFT 14 or

FAST 16.

3.17

AUTOMATIC CLIMATE CONTROL: Controls B and C (5/5)

Automatic usage

1

Press button 8 (a warning light comes

on in zone 1).

Manual use

1

Press button 9 to force air recirculation.

Prolonged use of this position may lead

to odours, caused by non-renewal of

air, and the formation of condensation

on the windows.

We advise you to return to automatic

mode as soon as air recirculation is no

longer needed, by pressing button 8 or

button 9 again.

9

8

7

9

8

7

To exit this function, press button 8 or

button 9 again.

Adjusting the distribution

of air in the passenger

compartment

Press buttons 7 to select the desired

distribution (a warning light is displayed

in zone 1):

Air recirculation

This function is managed automatically

but you can also activate it manually.

Note:

– during recirculation, air is taken from

the passenger compartment and

is recycled, with no air being taken

from outside the vehicle;

The air flow is mainly directed

to the demisting vents for the

windscreen and the side windows.

Ø

– air recirculation allows the exter-

nal atmosphere to be cut off (when

driving in polluted areas, etc.) and

to cool the passenger compartment

temperature more quickly.

The air flow is mainly directed

to the dashboard air vents.

½

¿

The air flow is directed mainly

towards the footwells.

The demisting/de-icing will still take

priority over the air recirculation.

3.18

AIR CONDITIONING: information and operating instructions (1/2)

Advice on use

Fuel consumption

Operating faults

In some situations (air conditioning off,

air recirculation activated, ventilation

speed at zero or low etc.), you may

notice that condensation starts to form

on the windows and windscreen.

You will normally notice an increase in

fuel consumption (especially in town)

when the air conditioning is operating.

For vehicles fitted with air conditioning

with no automatic mode, switch off the

system when it is not required.

As a general rule, contact your ap-

proved dealer in the event of an oper-

ating fault.

– Reduction in de-icing, demisting

or air conditioning performance.

This may be caused by the passen-

ger compartment filter cartridge be-

coming clogged.

If there is condensation, use the “Clear

View” function to remove it, then use

the air conditioning in automatic mode

to stop it forming again.

Advice for reducing consumption

and helping to preserve the

environment

Drive with the air vents open and the

windows closed. If the vehicle has been

parked in the sun, open the doors for a

few moments to let the hot air escape

before starting the engine.

– No cold air is being produced.

Check that the controls are set cor-

rectly and that the fuses are sound.

Otherwise, switch off the system.

Presence of water under the

vehicle

After prolonged use of the air condi-

tioning system, it is normal for water

to be present under the vehicle. This is

caused by condensation.

Vehicles equipped with

mode ECO

Maintenance

Refer to the Maintenance Document

for your vehicle for the inspection fre-

quency.

Once activated, ECO mode may

reduce air conditioning perform-

ance. Please refer to the informa-

tion on “Driving advice, Eco-driving”

in Section 2.

Do not add anything to the

vehicle’s ventilation circuit

(for example, to remove

bad odours).

Do not open the refriger-

ant fluid circuit. The fluid

may damage eyes or skin.

Use the air conditioning system reg-

ularly, even in cold weather, running

it at least once a month for approxi-

mately 5 minutes.

There is a risk of damage or of

fire.

3.19

AIR CONDITIONING: information and operating instructions (2/2)

Type of refrigerant fluid

Ñ

A

Type of oil in the air condi-

tioning circuit









Inflammable product

Consult the driver’s hand-

book

Maintenance

Quantity of refrigerant

fluid present in the ve-

hicle.

x.xxx kg

The refrigerant circuit may contain

fluorinated greenhouse gases.

Global

Warming

GWP xxxxx

Potential (CO2 equi-

valent).

Depending on the vehicle, you will find

the following information on label A af-

fixed inside the engine compartment.

Do not open the refriger-

ant circuit. The fluid may

damage eyes or skin.

CO2 eq Quantity in weight and

x.xx t in CO2 equivalent.

The presence and location of the infor-

mation on label A depends on the ve-

hicle.

Before performing any

action in the engine com-

partment, the ignition must

be switched off (please see

the information on “Starting, stop-

ping the engine” in Section 2).

3.20

MULTIMEDIA EQUIPMENT (1/2)

1

4

3

2

Multimedia systems

The location and operation of equip-

ment may vary according to the vehicle.

Hands-free telephone

integrated control

For equipped vehicles, use the steering

wheel controls 3.

1 Multimedia touchscreen display;

2 Steering column controls;

3 Steering wheel controls;

4 or 5 Microphone (depending on the

vehicle).

5

Using the telephone

We remind you of the need

to conform to the legislation

in force concerning the use

of such equipment.

Please refer to the multimedia in-

structions for further information.

3.21

MULTIMEDIA EQUIPMENT (2/2)

Multimedia sockets 7

USB sockets only allow the recharging

of accessories approved by the brand's

Technical Services for which the power

must not exceed 12 watts (5 volts) per

outlet.

The JACK socket enables the radio to

be used with an auxiliary cable.

7

6

The USB sockets can also be used to

recharge accessories with a maximum

power rating of 12 Watts (5 Volts) per

socket, which have been approved by

our Technical Department.

Multimedia sockets 6

You can use the USB sockets or the

card reader SD to access the multime-

dia content of your accessories and to

update the system.

The JACK socket enables the radio to

be used with an auxiliary cable.

The various sources can be selected

from the multimedia screen and from

the steering column controls.

Connect accessories with a

maximum power of 12 watts

only.

Fire hazard.

3.22

OUTSIDE AIR QUALITY FUNCTION

A

Take care

B

1

With the air conditioning switched on,

from the multimedia screen 1, select

“Menu”, “Vehicle”, “Take care”.

Visual B

Outside air quality

Air quality is shown on the multimedia

screen 1 by visual A or visual B, de-

pending on the vehicle.

Air quality is indicated by a graph.

Three colours indicate the air quality

level (from the cleanest to the most pol-

luted):

Visual A

1 (blue)

Air quality is shown by an animation

and an explanatory text.

2 (light grey)

3 (grey)

Please refer to the multimedia in-

structions for further information.

3.23

ELECTRIC WINDOWS (1/2)

These systems operate:

– with the engine running;

– with the ignition off until one of the

front doors is opened (limited to ap-

proximately 12 minutes).

– before starting, with the front doors

closed, after pressing the start

button.

1

Press the window switch down or pull it

up to lower or raise the window to the

desired height: the rear windows do not

open fully.

5

2

6

3

4

From the driver’s seat, use switch:

1 for the driver’s side;

2 for the front passenger side;

3 and 5 for the rear passenger win-

dows.

From the passenger seats, use

switch 6.

Safety of rear occupants

The driver can prevent operation of the rear electric windows by pressing

switch 4. A confirmation message is displayed on the instrument panel.

Driver’s responsibility

Never leave your vehicle with the RENAULT card or key inside, and never leave

a child, adult who is not self-sufficient or a pet, even for a short while. They may

pose a risk to themselves or to others by starting the engine or activating equip-

ment (such as the gear lever or electric windows). If any part of the body becomes

trapped, reverse the direction of the window immediately by pressing the relevant

switch.

Avoid resting any objects against

a half-open window: there is a risk

that the electric window could be

damaged.

Risk of serious injury.

3.24

ELECTRIC WINDOWS (2/2)

One-touch mode

Remote control window

Operating faults

closing

This mode works in addition to the ope-

ration of the electric windows described

previously.

In case of a fault when closing a

window, the system reverts to normal

mode: pull the switch concerned up

as often as necessary to fully close

the window, then hold the switch (still

on the closure side) for approximately

one second, then lower and raise the

window fully to reinitialise the system.

(vehicles with 4 one-touch electric win-

dows).

When you lock the doors from the out-

side, press the locking button on the

RENAULTcard twice in quick suc-

cession, or on the driver's door in

hands-free mode, and all the windows

will close automatically (and, depend-

ing on the vehicle, the sunroof).

Briefly press or pull the window switch

fully: the window is fully lowered or

raised. Pressing the switch again stops

the window moving.

Note: if the window detects resistance

when closing (e.g. tree branch, etc.), it

stops and then lowers again by a few

centimetres.

If necessary, contact an approved

Dealer.

It is recommended that the user only

operates the system when the vehi-

cle can be seen clearly and no one is

inside.

When closing the windows,

ensure that no part of the

body (arm, hand, etc.) is

protruding from the vehicle.

Risk of serious injury.

3.25

FIXED GLASS ROOF

1

A

2

0

B

2

Driver’s responsibility

Never leave your vehicle

with the RENAULT card or

key inside, and never leave

3

a child, adult who is not self-suffi-

cient or a pet, even for a short while.

Special features

To slide the curtain 1

With the ignition on:

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or by locking the

doors.

If the fixed sunroof blind detects resist-

ance when closing (arm etc.), it stops

and then moves back several centime-

tres.

– full opening: move the mark 3 on

the button 2 towards position B. The

marks in between correspond to the

intermediate positions of the sun-

blind.

If something gets trapped, reverse

the direction of travel as soon as

possible by turning button 2 fully to

the right (position B).

Operating fault

– to close: move mark 3 on button 2

to position 0.

If the blind will not close, turn switch 2

to position A or B to open the blind,

then turn switch 2 to position 0 until the

blind is fully closed.

Risk of serious injury.

If the blockage persists, contact an ap-

proved dealer.

3.26

INTERIOR LIGHTING (1/2)

1

2

Map reading lights

Footwell lights

Press switch 1 to get:

– permanent lighting;

– immediate switching off.

The lights 2 come on when the doors

are opened.

Note: for vehicles fitted with a multi-

function screen, you can use the mul-

tifunction screen to deactivate/acti-

vate the courtesy lights which come on

when the doors or luggage compart-

ment are opened. To do this, please

refer to “Vehicle settings customisation

menu” in Section 1.

1

When the doors or boot are un-

locked and opened, the reading and

footwell lights come on temporarily.

3.27

INTERIOR LIGHTING (2/2)

4

5

3

Centre console storage

compartment light

The light 3 comes on when the storage

Glove box light 4

Light 4 comes on when the cover is

opened.

Boot lights

Light 5 comes on when the luggage

compartment is opened.

3.28

SUN VISOR, BLINDS

3

1

2

4

5

Front sun visor

Lateral sun visor

Child minder mirror

Lower the sun visor 1 on the wind-

screen or unclip it and lower it over the

side window.

Pull the sun visor upwards using the

tab 3 until the hooks 4 engage in their

housings (make sure the hooks are

properly locked in position).

Pull on recess 5 to open it.

Vanity mirror

Slide cover 2, depending on the vehi-

cle, and the mirror is lit.

3.29

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (1/8)

4

3

2

5

1

Door pockets 1

It can hold a bottle.

Dashboard storage

compartment 2

Passenger storage drawer 3

To open, move your fingers into area 4 -

it will open by itself. If on a steep slope,

assist the drawer opening by pulling the

handle 5. It can hold A4 documents. It

is ventilated and refrigerated.

Ensure that no hard, heavy

or pointed objects are

placed in the “open” sto-

rage compartments in such

a way that they may fall onto pas-

sengers during sudden turning or

braking.

Nothing should be placed

Maximum load allowed in the pas-

senger storage compartment: 6 kg,

evenly distributed.

on the floor area in front of

the driver as such objects

may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

When driving, ensure

that the storage drawer is

closed. Risk of injury.

3.30

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (2/8)

7

8

6

9

Passenger storage

compartment

Cup holders 7

Central storage

compartment 8

Pull handle 6 to open it.

Slide the curtain 9 to open the storage

compartment.

The glove box can hold A4-size docu-

ments, a large bottle of water, etc.

The storage compartment is ventilated

and refrigerated.

When turning corners,

accelerating or braking,

ensure that the recepta-

cle being held by the cup

holder is not dislodged.

There is a risk of burning if hot

liquid escapes.

3.31

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (3/8)

10

11

Central armrest 10

Central storage

compartment 11

Lift up the armrest 10.

Nothing should be placed

on the floor area in front of

the driver as such objects

may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

3.32

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (4/8)

B

12

13

In cases of intensive use, a protective

system will prevent it from operating for

a few minutes.

Centre console 12

To move the centre console forward

or backward (movement B), press the

button 13 and slide the console. Once

in position, release the button and

check that it is correctly locked.

In any case, the load must not

exceed 6 kg.

3.33

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (5/8)

14

16

15

Storage compartment 14

Cup holders 15

This can be used for storing a mobile

ashtray, cup holder, etc.

Front and rear underfloor

storage 16

These compartments can hold road

maps, manuals, cloths, etc.

Nothing should be placed

on the floor area in front of

the driver as such objects

may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

3.34

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (6/8)

18

17

Rear armrest with cup holder

Cup holders 18

Lower armrest 17.

When turning corners,

accelerating or braking,

ensure that the recepta-

cle being held by the cup

holder is not dislodged.

There is a risk of burning if hot

liquid escapes.

3.35

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (7/8)

20

19

21

Rear door storage

compartment 19

Storage drawer 20 under the

centre console

Front seat storage pockets 21

Nothing should be placed

Ensure that no hard, heavy

or pointed objects are

placed in the “open” stor-

age compartments in such

a way that they may fall onto pas-

sengers during sudden turning or

braking.

on the floor area in front of

the driver as such objects

may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

3.36

PASSENGER COMPARTMENT STORAGE SPACE AND FITTINGS (8/8)

25

23

26

22

24

For a multimedia tablet

Rear parcel shelf 22

Retaining straps 23

They can be used, for example, to

retain a multimedia tablet etc.

Grab handle 25

This offers support and can be held

when the vehicle is being driven.

Attach the upper section of the parcel

shelf using the straps 23 and place the

lower section in one of the housings 24.

Do not use it for getting into or out of

the vehicle.

Clothes hooks 26

3.37

ASHTRAY, CIGAR LIGHTER, ACCESSORIES SOCKET

3

1

3

2

Cigarette lighter 1

Accessories sockets

With the ignition on, push in cigar

lighter 1. It will spring back with a click

when it is ready. Pull it out to use. After

use, replace it without pushing it all the

way in.

You can use the one of the sockets 1

or 3. They are provided for connecting

accessories approved by our Technical

Department.

Connect accessories with

Ashtray location 2

a

maximum power of

120 watts (12 V) only.

When several accessory

sockets are used at the same time,

the total power of the connected

accessories must not exceed

180 watts.

If your vehicle is not fitted with a

cigar lighter and an ashtray, these

can be obtained from an authorised

dealer.

Fire hazard.

3.38

REAR HEADRESTS

A

B

2

1

When the headrest is set at the

lowest position, this is for storage

only. It should not be in this position

when a seat is occupied.

Position for use

To adjust the angle of the

Lift the headrest fully until it locks.

headrest

Depending on the vehicle, move sec-

tion A towards or away from you to the

required position.

To remove the headrest

Lower the seatback slightly, press the

tab 1 and remove the headrest.

To adjust side supports

Depending on the vehicle, sections B

can be adjusted independently to the

desired position.

To refit the headrest

Insert the headrest rods into the

sleeves, and lower the headrest until it

locks.

The headrest is a safety

component; check that it is

fitted and in the correct po-

sition. The top of the head-

rest should be as close as possible

to the top of the head.

Storage position 2 for the

headrest

Press tab 1 and lower the headrest

completely.

3.39

REAR SEATS (1/6)

2

4

3

1

To move the seats forwards

To fold down the seatback

To raise the seatback

Be sure to position the seat belt cor-

rectly, hold the seatback, lift and ensure

that it is correctly locked.

or backwards

(flat-floor position)

Lift lever 1 to unlock the seat. Once in

the desired position, release the lever

and check that the seat is correctly

locked.

Lower the headrest 3 and lift the

handle 2 to fold down the seat. Make

sure the seat is correctly locked in po-

sition.

Note: before folding down the seat-

back, check that no device is plugged

into the sockets 4.

To tilt the seatback

Move the seat forwards if necessary.

Lift handle 2 and tilt the seatback to the

desired position.

When moving the rear

seats, ensure that nothing

obstructs the anchorage

Release the handle 2 and ensure that

the seatback is fully locked into posi-

tion.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

points (passenger’s arm or

leg, a pet, gravel, cloth, toys, etc.).

3.40

REAR SEATS (2/6)

7

When refitting the seat-

back, make sure it is cor-

rectly locked in place.

If seat covers are fitted,

make sure these do not prevent the

seatback latch from locking in.

Make sure that the seat belts are

positioned correctly.

6

5

Reposition the headrests.

To access the third row rear

seats

To unfold a seat in the third

row

When moving the rear

seats:

– Lift the handle 5;

– Hold the seatback and lower it at the

front until it locks;

– sit in the third row rear seat;

– hold the second row seatback and

fold it down;

– Make sure the seat is correctly

locked in position.

– Access the third row seats;

– check that no one is near

to any of the moving parts;

– place seat belt in hook 6 to avoid

damaging it;

– check that there is sufficient

space around the seat;

– Pull the strap 7 to lift the seatback.

Check that the bonnet is correctly

locked.

– check that nothing is obstructing

the section of the boot reserved

for storing the seat;

For safety reasons, carry out any

adjustments when the vehicle is sta-

tionary.

Before moving a second row seat forwards, ensure that the seat is not in the flat-

floor position.

3.41

REAR SEATS (3/6)

9

8

11

10

Note: If the lever 8 does not work, pull

the emergency exit strap 9.

To get out of the third row

rear seats

To fold down a third row seat

manually

– Lift the lever 8;

– From the luggage compartment,

lower the headrest;

– guide the seat forwards until it locks.

– pull strap 10. Depending on the vehi-

cle, it is located above or below the

false floor 11.

Using the emergency exit

strap 9 causes the second

row rear seats to move

backwards. During the op-

eration, ensure that nothing is ob-

structing the movement of the seat

(body parts, pets, toys etc.).

For safety reasons, carry out any

adjustments when the vehicle is sta-

tionary.

Risk of injury.

3.42

REAR SEATS (4/6)

Disabling the function

– With the engine running, a buckled

seat belt prevents the movement of

the relevant seat.

13

– Once the vehicle is moving the two

controls are deactivated.

12

To raise the seats manually

Raise each seat as described on the

previous pages.

Conditions of use

To automatically fold down

the seats (flat position)

The rear seats are electrically unlocked

to fold down in order to create a flat

floor.

When moving the rear

seats:

With the vehicle at a standstill and the

rear seat belts unlocked:

– check that no one is near

to any of the moving parts;

– from control 12, with the boot lid

open;

– check that there is sufficient

space around the seat;

There are two ways to manoeuvre the

seats:

– from the boot using control 12;

– from the multimedia screen 13.

– from the multimedia screen 13, with

the engine running.

– check that nothing is obstructing

the section of the boot reserved

for storing the seat;

Note: Before performing any unlock-

ing operations to fold down the seats,

the trays on the back of the front seats

must be folded away.

For safety reasons, carry out any

adjustments when the vehicle is sta-

tionary.

3.43

REAR SEATS (5/6)

Encountering an obstacle

13

While being moved, if a seat encoun-

ters an obstacle, the movement stops

of its own accord. You will then have

to manually fold back the seat after re-

moving the obstacle.

A

B

Operating fault

C

If all user conditions have been ful-

filled and the folding action still fails to

operate, please contact an authorised

dealer.

12

D

E

Using control 12

From the multimedia screen 13

Depending on the vehicle, folding

switches:

With the vehicle at a standstill, select

menu “Vehicle”, “Seats” then “One-

touch folding”.

A the rear left seatback in the second

row.

Press on the seat you wish to fold away,

or on all seats, then confirm.

B the rear centre and right-hand seat-

backs in the second row.

C the rear right seatback in the third

row.

D the rear left seatback in the third row.

E all seats.

When moving the rear

seats, ensure that nothing

obstructs the anchorage

points (passenger’s arm or

leg, a pet, gravel, cloth, toys, etc.).

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

3.44

REAR SEATS (6/6)

Use restriction

It is not permitted to drive with a second

row rear seatback or seat folded down

when there is a passenger occupying a

third row rear seat.

3.45

TAILGATE

2

1

3

Manual controls

Opening the doors manually

from the inside

If it is impossible to unlock the tailgate,

it can be done manually from inside:

To open

Press button 1 and lift the tailgate.

– access the luggage compartment by

folding forward the seatback(s) of

the rear bench seat;

To close

Lower the boot lid using the handle

inside the boot 2 to assist you.

– insert a pencil or similar object in

recess 3 and slide the unit as shown

in the illustration;

The attaching of any carry-

ing device (bike rack, lug-

gage box, etc.) resting on

the luggage compartment

lid is prohibited. To install a carrying

device on your vehicle, contact an

Approved Dealer.

– push the tailgate to open it.

3.46

REAR PARCEL SHELF

1

2

Removal

– Unhook the two cords 1.

– Lift the parcel shelf 2 upwards, then

pull it towards you.

To refit it, proceed in reverse order to

removal.

Do not place any heavy or

solid objects on the parcel

shelf.

These may pose a risk to

the vehicle occupants if the driver

has to brake suddenly or if the vehi-

cle is involved in an accident.

3.47

LUGGAGE COMPARTMENT COVER

2

B

C

1

A

4

5

3

1

To remove the flexible

section of the luggage cover

Pull handle 1 gently to release the pins

from their mounting points located on

each side of the boot.

Guide the luggage cover 2 onto the

roller (movement A).

Removing the luggage cover

Slide the button 2 (movement B) and

lift the right-hand side of the roller at the

same time (movement C).

Luggage compartment cover

storage

Lift up the rear of luggage compartment

carpet 4

Then lift the left-hand side of the roller

and remove it.

Remove cover 3 from the side storage

compartment then tilt cover 5

To refit the luggage cover, carry out this

procedure in reverse.

Pivot the luggage cover so that the

handle 1 is visible and towards the front

of the vehicle.

Do not place any heavy or

solid objects on the luggage

cover.

Store the luggage cover with the

handle 1 forwards, inserting it one side

at a time;

These may pose a risk to

the vehicle occupants if the driver

has to brake suddenly or if the vehi-

cle is involved in an accident.

Reposition the cover 5 and the flap 3.

3.48

LUGGAGE COMPARTMENT FITTINGS AND STORAGE (1/2)

1

3

2

1

B

A

Intermediate position

(depending on vehicle)

Storage position

Mobile floor 1

Depending on the vehicle, the mobile

floor is reversible.

This allows for more space to store

things in the boot.

In the blocked position, it allows you to

access the tools stored under the boot

carpet.

– Remove the mobile floor 1;

Flat position

– place it in the boot under the runners

(2 and 3).

It allows you to have a flat floor by fold-

ing down the backs of the rear bench

seats and to compartmentalise the boot

into two distinct spaces.

– Remove the mobile floor 1 by moving

it back (movement A) and pivoting it

upwards (movement B);

– place it in the boot, letting it be

guided by the runners (2 and 3).

The mobile floor is positioned on the

runners (2 and 3).

Maximum load allowed on the

mobile floor: 120 kg, evenly distrib-

uted.

3.49

LUGGAGE COMPARTMENT FITTINGS AND STORAGE (2/2)

6

4

5

Hook 4

Anchorage points

Side storage compartment 6

You can use this to secure a bag.

Attachment points 5.

Depending on the vehicle, this may be

used to hold the tyre inflation kit.

Please refer to “Tyre inflation kit” in

Section 5.

Always position objects being trans-

ported so that the heaviest items

are resting against the back of the

rear seat.

If your vehicle is not equipped with

anchorage points, you can get them

from an authorised dealer.

3.50

TRANSPORTING OBJECTS IN THE BOOT

A

B

Always place the objects to be trans-

ported so that their largest side rests

against the back of the rear seat for

normal loads (e.g.: A), or against the

back of the front seats B when the rear

seatbacks are folded down.

Always position the heavi-

est items directly on the

floor. Use the lashing points

on the floor of the luggage

If you have to place objects on the

folded seat back, it is vital that you

remove the headrests before folding

the seat back so that it can be folded as

flat as possible against the seat.

compartment, if these are fitted to

the vehicle. The luggage should be

loaded in such a way that no items

will be thrown forward and strike the

occupants if the driver has to brake

suddenly. Fasten the rear seat belts,

even if the seats are not occupied.

3.51

TRANSPORTING OBJECTS towbar

A

A: 866 mm (short chassis).

A: 1,023 mm (long chassis).

Permissible nose weight, maxi-

mum permissible towing weight,

braked and unbraked: refer to

the information on “Weights” in

Section 6.

Choice and fitting of towing

equipment

Maximum weight of towing equip-

ment: 38 kg

For fitting and conditions of use,

refer to the equipment’s fitting in-

structions.

If the towbar ball obscures the regis-

tration plate or the rear fog lights, it

should be removed when not in use.

Please keep these instructions with

the rest of the vehicle documenta-

tion.

In all cases, comply with local leg-

islation.

3.52

LUGGAGE NET (1/3)

A

1

2

B

4

3

5

Depending on the vehicle, this may be

used when transporting animals or lug-

gage to isolate them from the passen-

ger section.

– attach the two hooks 5 of the straps 3

from the net onto the anchoring

points 4;

Fitting the luggage net

behind the front seats

Inside the vehicle on each side:

– adjust the net strap 3 so that it is taut.

– lower cover 1 to gain access to the

anchoring points for the top part of

the luggage net;

It can be positioned:

– behind the rear seats A;

– behind the front seats B.

– insert the top rod of net 2 into the an-

choring points;

The luggage net is de-

signed to retain a maximum

weight of 10 kg.

Do not install the luggage

net in this position when a

passenger is occupying a

rear seat.

Risk of injury.

3.53

LUGGAGE NET (2/3)

6

7

– lift cover 6 to access the luggage net

Fitting the luggage net

behind the rear seats

(behind the second row rear seats)

upper mounting rail;

– insert upper rod 7 for the net into the

rail;

Inside the vehicle on each side:

– push the second row seats fully

forward;

– fit the mobile floor in the storage po-

sition (refer to the information on

“Boot storage space and fittings” in

Section 3) or remove it;

3.54

LUGGAGE NET (3/3)

8

9

10

8

– attach the hook 10 of the luggage

strap to the anchor points 8 closest

to the position of the mobile floor

(please refer to the information in

“Passenger Compartment Storage,

boot storage”, section 3);

– adjust net strap 9 so that it is taut.

– adjust the position of the second row

seats: ensure that the seatbacks do

not touch the luggage net.

The luggage net is de-

signed to retain a maximum

weight of 10 kg.

Risk of injury.

3.55

ROOF BARS

1

3

2

For information on the range of

equipment adapted to your vehi-

cle, we advise you to consult an ap-

proved Dealer.

Refer to the fitting instructions for in-

formation on how to fit roof bars and

conditions of use.

Please keep these instructions with

the rest of the vehicle documenta-

tion.

Accessing the mounting

points

User precautions

Handling the tailgate

Maximum permissible load on

roof rack: refer to the information

on “Weights” in Section 6.

Vehicles fitted with longitudinal roof

bars

Before operating the tailgate, check the

objects and/or accessories (bike rack,

roof box, etc.) fitted on the roof bars:

these must be correctly positioned and

secured, and must not prevent the tail-

gate from operating correctly.

The attachment inserts 2 are located on

the longitudinal roof bars 1.

Vehicles not fitted with longitudinal

roof bars

The attaching of any carry-

ing device (bike rack, lug-

gage box, etc.) resting on

the luggage compartment

lid is prohibited. To install a carrying

device on your vehicle, contact an

Approved Dealer.

Open the doors to access the fixing

points 3.

3.56

Your comfort for Your Renault Scenic 4 Door Fourth Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals