REAR HEADRESTS
A
B
B
2
1
When the headrest is set at the
lowest position, this is for storage
only. It should not be in this position
when a seat is occupied.
Position for use
To adjust the angle of the
Lift the headrest fully until it locks.
headrest
Depending on the vehicle, move sec-
tion A towards or away from you to the
required position.
To remove the headrest
Lower the seatback slightly, press the
tab 1 and remove the headrest.
To adjust side supports
Depending on the vehicle, sections B
can be adjusted independently to the
desired position.
To refit the headrest
Insert the headrest rods into the
sleeves, and lower the headrest until it
locks.
The headrest is a safety
component; check that it is
fitted and in the correct po-
sition. The top of the head-
rest should be as close as possible
to the top of the head.
Storage position 2 for the
headrest
Press tab 1 and lower the headrest
completely.
3.39
English 
