2017-2022 Renault Scenic 4 Door Your comfort -> Automatic climate control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Your comfort -> Automatic climate control for Your Renault Scenic 4 Door Fourth Generation (2017-2022)

AUTOMATIC CLIMATE CONTROL: Controls A (1/5)  
Automatic mode  
1
Climate  
10  
8
9
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising consumption.  
The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
A
19  
11  
12  
18  
17  
16  
15  
14  
13  
2
7
This mode consists of a choice of three  
programmes:  
NORMAL : allows the selected comfort  
level to be best attained, depending on  
the exterior conditions. Press button 4  
or key 9.  
5
6
13  
4
3
11 and 18 Ventilation speeds.  
Controls A  
12 Passenger compartment air distri-  
Press zone 14 to access the multifunc-  
tion screen controls 1. The presence of  
the controls detailed below will depend  
on the vehicle model.  
SOFT: reaches the desired comfort  
level more gently and silently. Press  
button 8.  
bution.  
13 Right and left temperature display.  
FAST: increases the flow of air in the  
passenger compartment. This mode  
is recommended in particular to opti-  
mise comfort in the rear seats. Press  
button 10.  
14 Zone displaying air conditioning set-  
2 and 7 Left and right temperature indi-  
tings.  
cation adjustment.  
15 “DUAL” function.  
3 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
door mirrors.  
16 “Automatic recirculation” function.  
17 Air conditioning.  
4, 8, 9 and 10 automatic modes  
5 Air recirculation.  
19 Stopping the system.  
6 “Clear View” function.  
Some buttons have a warning light  
indicating their operative state.  
3.9  
AUTOMATIC CLIMATE CONTROL: Controls A (2/5)  
Note: the air conditioning configura-  
tion depends on the mode selected in  
the “Multi-Sense” menu (please refer  
to the information on “Multi-Sense” in  
Section 3).  
Climate  
10  
8
9
19  
18  
20  
11  
7
2
15  
14  
4
The displayed temperature values  
show a comfort level.  
Varying the ventilation speed  
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
Temperature adjustment  
There are two types of settings:  
– uniform passenger compartment  
setting;  
– DUAL function setting to independ-  
ently adjust the left and right sides.  
When starting the engine, increas-  
ing or decreasing the value dis-  
played will not allow the com-  
fort level to be reached any more  
quickly. The system will always op-  
timise the temperature increase or  
decrease (the ventilation system  
does not start instantly at maximum  
speed: it gradually increases). This  
may take several minutes.  
You can still adjust the ventilation speed  
by pressing buttons 11 or 18 or by slid-  
ing your finger in zone 20.  
Uniform passenger compartment  
setting  
Use control 7.  
DUAL function setting  
Press button 15 to activate. Use con-  
trol 7 to adjust the left side and control 2  
for the right side.  
Generally speaking, unless there is  
a particular reason not to, the dash-  
board air vents should remain open.  
3.10  
AUTOMATIC CLIMATE CONTROL: Controls A (3/5)  
To exit this function, press either:  
– button 4;  
Climate  
8
9
10  
– again button 6;  
– on button 8, 9 or 10.  
20  
11  
18  
6
4
3
Press button 6 – the integrated indica-  
tor light comes on.  
Clear View function  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, and the door  
mirrors (depending on the vehicle). It  
imposes automatic operation of the  
air conditioning and rear screen de-ic-  
ing and, depending on the vehicle, the  
windscreen electric de-icer.  
Press button 3 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
To adjust the ventilation speed: press  
buttons 11 or 18 or slide your finger in  
zone 20.  
3.11  
AUTOMATIC CLIMATE CONTROL: Controls A (4/5)  
Rear screen de-icing/  
demisting  
Climate  
8
9
10  
Press button 3 – the integrated indica-  
tor light comes on. This function en-  
ables rapid demisting or de-icing of the  
rear screen and de-icing of the door  
mirrors (on equipped vehicles).  
19  
To exit this function, press button 3  
again. Demisting automatically stops.  
17  
14  
4
3
Switching air conditioning on  
or off  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Stopping the system  
Press button 19 to activate or deacti-  
vate the system (the operating warn-  
ing light on button 19 notifies you of the  
system status).  
Press button 17 to:  
– activate the air conditioning (a warn-  
ing light in zone 14 comes on);  
It is preferable to use one of the automatic programmes NORMAL, SOFT or  
FAST.  
– deactivate the air conditioning (the  
warning light in zone 14 goes out).  
In automatic mode (4 warning light is lit), all air conditioning functions are control-  
led by the system.  
You can still change the selection made by the system. In this case, the indicator  
light for button 4 goes out.  
To return to automatic mode, press one of the programmes NORMAL 9, SOFT 8  
or FAST10 or the button 4.  
3.12  
AUTOMATIC CLIMATE CONTROL: Controls A (5/5)  
Automatic usage  
Climate  
Press button 16 (a warning light comes  
on in zone 14).  
Manual use  
Press button 5 to force air recirculation.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
16  
12  
We advise you to return to automatic  
mode as soon as air recirculation is no  
longer needed, by pressing key 16 or  
button 5 again.  
14  
5
To exit this function, press key 16 or  
button 5 again.  
Adjusting the distribution  
of air in the passenger  
compartment  
Press buttons 12 to select the desired  
distribution (a warning light is displayed  
in zone 14):  
Air recirculation  
This function is managed automatically  
but you can also activate it manually.  
Note:  
– during recirculation, air is taken from  
the passenger compartment and  
is recycled, with no air being taken  
from outside the vehicle;  
The air flow is mainly directed  
to the demisting vents for the  
windscreen and the side windows.  
Ø
– air recirculation allows the exter-  
nal atmosphere to be cut off (when  
driving in polluted areas, etc.) and  
to cool the passenger compartment  
temperature more quickly.  
The air flow is mainly directed  
to the dashboard air vents.  
½
¿
The air flow is directed mainly  
towards the footwells.  
The demisting/de-icing will still take  
priority over the air recirculation.  
3.13  
AUTOMATIC CLIMATE CONTROL: Controls B and C (1/5)  
Automatic mode  
1
1
C
B
2
3
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising consumption.  
The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
2
3
4
4
4
4
5
5
18  
17  
16  
7
12  
11  
13 14 15  
17  
11  
10  
18  
16  
7
15  
12 13 14  
This mode consists of a choice of three  
programmes:  
10  
6
6
AUTO: allows the selected comfort  
level to be best attained, depending  
on the exterior conditions. Press the  
button 15.  
9
8
9
8
Controls B and C  
Indicators  
5 and 11 Left and right temperature in-  
dication adjustment.  
6 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
door mirrors.  
7 Passenger compartment air distribu-  
tion.  
8 “Automatic recirculation” function.  
9 Air recirculation.  
The following indicators are displayed  
on the screen 3:  
SOFT: reaches the desired comfort  
level more gently and silently. Press the  
button 14.  
1 Active mode, ventilation speed and  
air distribution in the passenger com-  
partment (temporary display after  
pressing the associated controls).  
FAST: increases the flow of air in the  
passenger compartment. This mode is  
recommended in particular to optimise  
comfort in the rear seats. Press the  
button 16.  
2 Outside air temperature.  
4 Air temperature, left and right.  
10 “Clear View” function.  
12 and 18 Ventilation speeds.  
13  
“DUAL" function.  
14, 15, and 16 Automatic modes.  
17 Air conditioning.  
Some buttons have a warning light  
indicating their operative state.  
3.14  
AUTOMATIC CLIMATE CONTROL: Controls B and C (2/5)  
Note: the air conditioning configura-  
tion depends on the mode selected in  
the “Multi-Sense” menu (please refer  
to the information on “Multi-Sense” in  
Section 3).  
5
18  
12  
11  
13  
11  
18  
5
12 13  
19  
The displayed temperature values  
show a comfort level.  
Varying the ventilation speed  
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
Temperature adjustment  
There are two types of settings:  
– uniform passenger compartment  
setting;  
– “DUAL” function setting to independ-  
ently adjust the left and right sides.  
When starting the engine, increas-  
ing or decreasing the value dis-  
played will not allow the com-  
fort level to be reached any more  
quickly. The system will always op-  
timise the temperature increase or  
decrease (the ventilation system  
does not start instantly at maximum  
speed: it gradually increases). This  
may take several minutes.  
You can still adjust the ventilation  
speed by pressing buttons 12 or 18 or,  
depending on the vehicle, by sliding  
your finger in zone 19.  
Uniform passenger compartment  
setting  
Use control 11.  
“DUAL” function setting  
Press button 13 to activate. Use con-  
trol 11 to adjust the left side and con-  
trol 5 for the right side.  
Generally speaking, unless there is  
a particular reason not to, the dash-  
board air vents should remain open.  
3.15  
AUTOMATIC CLIMATE CONTROL: Controls B and C (3/5)  
To exit this function, press either:  
– again button 10;  
– one of the buttons 14, 15 or 16.  
18  
16  
15  
12  
14  
18  
16  
15  
19  
12  
14  
10  
10  
6
6
Press button 10 – the integrated indica-  
tor light comes on.  
Clear View function  
This function quickly demists and de-  
ices the windscreen, the rear screen,  
the front side windows, and the door  
mirrors (depending on the vehicle). It  
imposes automatic operation of the  
air conditioning and rear screen de-ic-  
ing and, depending on the vehicle, the  
windscreen electric de-icer.  
Press button 6 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
To adjust the ventilation speed: press  
buttons 12 or 18 or slide your finger in  
zone 19.  
3.16  
AUTOMATIC CLIMATE CONTROL: Controls B and C (4/5)  
Rear screen de-icing/  
demisting  
1
Press button 6 – the integrated indica-  
tor light comes on. This function en-  
ables rapid demisting or de-icing of the  
rear screen and de-icing of the door  
mirrors (on equipped vehicles).  
1
To exit this function, press button 6  
again. Demisting automatically stops.  
15 16 17  
14  
17  
16  
12  
14 15  
12  
6
6
Switching air conditioning on  
or off  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Stopping the system  
To switch the system off, press  
button 12 repeatedly until the message  
OFF appears in zone 1.  
Press button 17 to:  
– activate the air conditioning (a warn-  
ing light in zone 1 comes on);  
It is preferable to use one of the automatic programmes AUTO, SOFT or  
FAST.  
– deactivate the air conditioning (the  
warning light in zone 1 goes out).  
In automatic mode (indicator light on button 14, 15 or 16 lit), all air conditioning  
functions are controlled by the system.  
You can still change the selection made by the system. In this case, the indicator  
light for button 14, 15 or 16 goes out.  
To return to automatic mode, press one of programmes AUTO 15, SOFT 14 or  
FAST 16.  
3.17  
AUTOMATIC CLIMATE CONTROL: Controls B and C (5/5)  
Automatic usage  
1
Press button 8 (a warning light comes  
on in zone 1).  
Manual use  
1
Press button 9 to force air recirculation.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
We advise you to return to automatic  
mode as soon as air recirculation is no  
longer needed, by pressing button 8 or  
button 9 again.  
9
8
7
9
8
7
To exit this function, press button 8 or  
button 9 again.  
Adjusting the distribution  
of air in the passenger  
compartment  
Press buttons 7 to select the desired  
distribution (a warning light is displayed  
in zone 1):  
Air recirculation  
This function is managed automatically  
but you can also activate it manually.  
Note:  
– during recirculation, air is taken from  
the passenger compartment and  
is recycled, with no air being taken  
from outside the vehicle;  
The air flow is mainly directed  
to the demisting vents for the  
windscreen and the side windows.  
Ø
– air recirculation allows the exter-  
nal atmosphere to be cut off (when  
driving in polluted areas, etc.) and  
to cool the passenger compartment  
temperature more quickly.  
The air flow is mainly directed  
to the dashboard air vents.  
½
¿
The air flow is directed mainly  
towards the footwells.  
The demisting/de-icing will still take  
priority over the air recirculation.  
3.18  

Related Topics

Popular Owner Manuals