LEVELS (2/3)
Replacement intervals
Topping up
2
Refer to the Maintenance Document for
your vehicle.
After any operation on the hydraulic
circuit, a specialist must replace the
fluid. Only use fluids approved by our
Technical Department (and taken from
a sealed container).
The vehicle drive system
in an electric vehicle uses
a direct voltage of approxi-
mately 400 volts.
Level 2
It is normal for the level to drop as the
brake linings wear, but it must never
drop lower than the “MINI” warning
line.
If you wish to check the disc wear your-
self, you should obtain the document
explaining the checking procedure from
our network or from the manufacturer’s
website.
This system can get hot during
and after switching off the ignition.
Observe the warning messages on
the labels in the vehicle.
Any intervention or modification on
the vehicle’s 400 V electrical system
(components, cables, connectors,
traction battery) is strictly prohibited.
Brake fluid
The risk of serious burns or elec-
tric shocks can lead to death.
The level should be read with the engine
switched off and on level ground. This
should be checked frequently, and im-
mediately if you notice even the slight-
est loss in braking efficiency.
The engine cooling fan may also
start at any moment. The
label in the engine compartment re-
minds you of this.
Replacement intervals
Risk of injury.
Refer to the Maintenance Document for
your vehicle.
If there is an abnormal or repeated
drop in the fluid level, please consult
an authorised dealer.
4.5
English 
