2019-2024 Renault Zoe 4 Door Your comfort -> Automatic climate control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Your comfort -> Automatic climate control for Your Renault Zoe 4 Door Third Generation (2019-2024)

AUTOMATIC CLIMATE CONTROL (1/4)  
Adjusting the ventilation  
speed.  
2
3
1
4
5
6
In automatic mode, the system uses  
the most suitable amount of air to reach  
and maintain the desired comfort level.  
You can still adjust the ventilation  
speed by turning control 1 to increase  
or reduce the ventilation speed.  
Adjusting the air temperature  
Turn control 3 to obtain the desired  
temperature.  
7
Automatic mode  
8
Turning the control to the right in-  
creases the temperature.  
The controls  
(depending on the vehicle)  
Note: to increase the vehicle range,  
reduce the comfort level by turning  
the 3 control  
The automatic climate control system  
guarantees comfort in the passen-  
ger compartment and good visibility  
(except in the event of extreme condi-  
tions), while optimising fuel consump-  
tion. The system controls the ventilation  
speed, air distribution, air recirculation,  
and starting and stopping the air condi-  
tioning and air temperature.  
1 Adjusting the ventilation speed and  
OFF position.  
2 “Clear View” function.  
3 Adjusting the air temperature.  
4 Automatic mode.  
5 Air conditioning control.  
AUTO: allows the selected comfort  
level to be best attained, depending on  
the exterior conditions. Press button 4.  
6 Distribution of air in the passenger  
compartment.  
7 Air recirculation.  
8 De-icing/demisting of the rear screen  
and, depending on the vehicle, the  
rear view mirrors.  
Any action on a button other than  
the AUTO button triggers deactiva-  
tion of automatic mode.  
3.7  
AUTOMATIC CLIMATE CONTROL (2/4)  
Clear View function  
4
6
2
Press the 2 button: the integrated indi-  
cator light comes on.  
This function quickly de-mists the wind-  
screen, rear screen, front side windows  
and door mirrors (depending on the  
vehicle). The air conditioning and rear  
screen de-icing functions must be ac-  
tivated.  
Press button 8 to stop the heated rear  
screen operating, and the integrated in-  
dicator goes out.  
To exit this function, press button 2  
or 4.  
8
The air flow is directed towards  
the dashboard vents and to-  
wards the footwells.  
Adjusting the distribution  
of air in the passenger  
compartment  
Turn control 6. The integrated warning  
light in the button comes on.  
ö
The air flow is mainly directed  
to the dashboard air vents.  
ô
ó
The air flow is directed mainly  
towards the footwells.  
All the air is then directed to  
the windscreen and front side  
window demisting vents.  
W
The air flow is distributed be-  
tween front side window de-  
misting vents, the windscreen demist-  
ing vents and the footwells.  
Some buttons have an operating  
tell-tale which indicates the operat-  
ing status.  
3.8  
AUTOMATIC CLIMATE CONTROL (3/4)  
5
8
Rear screen de-icing/  
demisting  
Switching air conditioning on  
or off  
Press the 8 button: the integrated in-  
dicator light comes on. This function  
enables rapid demisting or de-icing of  
the rear screen and de-icing of the rear  
view mirrors (on equipped vehicles).  
In automatic mode, the system switches  
the air conditioning system on or off,  
depending on the climate conditions.  
Press the button 5 to force the air con-  
ditioning to stop. The integrated warn-  
ing light will go out.  
To exit this function, press button 8  
again. Demisting automatically stops.  
3.9  
AUTOMATIC CLIMATE CONTROL (4/4)  
Stopping the system  
1
4
Turn the control 1 to “OFF” to stop the  
system. To start it, turn the control 1  
again, then adjust the fan speed or  
press the button 4.  
7
Manual use  
Air recirculation (isolation of  
the passenger compartment)  
This function is managed automatically  
(operation is confirmed by a warning  
light on button 7), but you can also acti-  
vate it manually.  
Press the 7 button: the integrated indi-  
cator light comes on.  
Prolonged use of this position may lead  
to odours, caused by non-renewal of  
air, and the formation of condensation  
on the windows.  
We therefore advise you to return to au-  
tomatic mode as soon as air recircula-  
tion is no longer needed, by pressing  
button 7.  
The demisting/de-icing will still take  
priority over the air recirculation.  
3.10  

Related Topics

Popular Owner Manuals