RevePrsaerkAinssgisatn(dRemaarnVoieewuvCrianmg era)
Reverse assist settings
●
Press the brake pedal until the parking assist
Familiarising yourself with the system
system completes the steering wheel turns; OR:
press the brake pedal until the symbol goes
out on the instrument panel screen.
Reverse assist oers the user the possibility to
change the image's brightness, contrast and
colour settings. To change these settings:
To familiarise yourself with the system, the ori-
entation lines and their function, SEAT recom-
mends practising in a place without too much
trac or in a car park when there are good
weather and visibility conditions
●
Move forward until the continuous ParkPilot
●
Stop the vehicle in a safe place without
signal sounds; OR: move forward until the re-
verse indication appears on the instrument
panel display. The Park Assist system steers the
vehicle forward and back until it can exit the
space.
switching o the ignition or the infotainment
system.
WARNING
●
●
Apply the parking brake.
Select reverse gear.
●
The reverse assist does not make it possi-
ble to precisely calculate the distance from
obstacles and nor can it overcome the sys-
tem's own limits, hence its negligent use may
cause serious accidents and injuries if used
without due care. The driver should be aware
of his/her surroundings at all times to ensure
safe driving.
●
The vehicle can exit the space when a cor-
●
Press the
function button displayed on
responding message is displayed on the instru-
ment panel and, in some cases, an acoustic
signal sounds. Take charge of the steering with
the turning angle set by the Park Assist system.
the screen.
●
Make the desired adjustments on the menu
by pressing the –/+ function buttons or by mov-
ing the scroll button.
●
Paying attention to the trac, exit the parking
space.
●
The camera lens expands and distorts the
Requirements for parking and manoeuvring
with the rear assist
field of view and displays the objects on the
screen in a way that is diꢀerent from reality.
Distance perception is also distorted.
Reverse Assist (Rear View
Camera)
The system should not be used in the following
cases:
●
Due to the screen resolution or light con-
●
If the image displayed is not very reliable or is
ditions, some items may be blurry or not dis-
played at all. Take care with thin posts, fen-
ces, railings or trees that might not be seen
on the screen and could damage the vehicle.
distorted, or if the lens is dirty.
Introduction
●
●
●
If the area behind the vehicle is incomplete.
If the vehicle is heavily loaded.
A camera installed in the rear lid handle assists
the driver with reverse parking or manoeuvring
››› page 137.
●
The reverse assist has blind spots where
If the position of the camera has changed
it cannot see people or objects. Monitor the
after a rear-end collision. Have the system
vehicle's surrounding area at all times.
checked by a specialised workshop.
The camera image is viewed together with ori-
entation lines projected on the Infotainment
system screen. Part of the bumper can be seen
at the bottom, which can be used by the driver
as a reference point.
●
The system is not a replacement for driver
awareness. Supervise the parking manoeu-
vre and the vehicle's surrounding area at all
times.
173
English 
