Opening and closing
Programming convenience opening in the
Easy Connect*
Roll-back function
pinched against the window frame. Risk of
accident.
The roll-back function reduces the risk of in-
jury when the electric windows close.
–
Select: button > SETTINGS function
button > Opening and closing > Opening
the window by holding down button
or > Front window on/off.
Convenience opening and closing
●
If a window is obstructed when closing au-
tomatically, the window stops at this point
Use the convenience opening/closing func-
tion to easily open/close all the windows
from the outside.
and lowers immediately›››
.
WARNING
●
Next, check why the window does not close
before attempting it again.
●
Never close the windows without due
care or proper control. There is a risk of suf-
fering injury.
●
If you try within the following 10 seconds
Convenience open function
and the window closes again with difficulty or
there is an obstruction, the automatic closing
will stop working for 10 seconds.
●
For safety reasons, you should only use
–
Press and hold the button on the remote
control key until all the windows have
reached the desired position, or
the remote control open and close func-
tions within about 2 metres of the vehicle.
To avoid injuries, always keep an eye on the
windows when pressing the button to close
them. The windows stop moving as soon as
the button is released.
●
If the window is still obstructed, the window
will stop at this point.
If there is no obvious reason why the win-
dow cannot be closed, try to close it again by
pulling the tab within ten seconds. The win-
dow closes with maximum force. The roll-
back function is now deactivated.
If more than 10 seconds pass, the window
will open fully when you operate one of the
buttons. One-touch closing is reactivated.
–
First unlock the vehicle using the button
on the remote control key and then keep
the key in the driver door lock until all the
windows have reached the required posi-
tion.
●
One-touch opening and closing
Convenience close function
●
One-touch opening and closing means you
do not have to hold down the button.
–
Press and hold the button on the remote
control key until all the windows are closed
››› , or
1
2
3
4
Buttons››› Fig. 147
,
,
and
have
WARNING
two positions for opening windows and two
for closing them. This makes it easier to open
and close windows to the desired position.
–
Lock the driver's door with the key and hold
the key in the lock position until all the win-
dows are closed
Observe the safety warnings››› in Open-
ing and closing the electric windows on
page 144.
One-touch closing
●
The roll-back function does not prevent
fingers or other parts of the body getting
–
Pull up the window button briefly up to the
second position. The window closes fully.
»
145
English 
