2016-2020 Seat Ateca SUV Infotainment System -> Connectivity User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment System -> Connectivity for Your Seat Ateca SUV First Generation (2016-2020)

Opening and closing  
D
On the second level, the sunroof automati-  
cally moves to the corresponding final posi-  
tion after briefly pressing the button. Activat-  
ing the button again stops the automatic  
function.  
Automatic function: briefly press button  
forwards to the second level.  
Opening and closing the sunroof  
Stopping the automatic operation during  
the opening or closing  
C
D
Press button  
or  
again.  
Adjusting the tilt position of the sunroof  
B
Press the rear part of the button  
to the  
first level.  
Opening and closing the sun blind  
Automatic function: briefly press the rear  
B
part of button  
to the second level.  
Fig. 148 On the interior roof lining: sunroof  
Closing the sunroof from a tilted position  
button.  
A
Press the front part of the button  
to the  
first level.  
The sunroof only works when the ignition is  
switched on. Once the ignition has been  
switched off, you can still open or close the  
sunroof for a few minutes provided the driver  
door and the front passenger door are not  
opened.  
Automatic function: briefly press the front  
A
part of the button  
to the second level.  
Stopping the automatic operation by ad-  
justing the tilted position of the sunroof or  
by closing the sunroof  
Fig. 149 On the interior roof lining: switches for  
The sun blind automatically opens along with  
the sunroof if completely closed or if in front  
of the sunroof. The sun blind remains in the  
previous position and does not automatically  
close with the sunroof. The sun blind can only  
be closed completely once the sunroof has  
been closed.  
the sun blind.  
A
B
Press button  
or  
again.  
The electrical sun blind works when the igni-  
tion is switched on.  
Opening the sunroof  
When the sunroof is in its most tilted position,  
the sun blind automatically goes into a venti-  
lation position. The sun blind remains in this  
position also with the sunroof closed.  
C
Press button  
backwards to the first level.  
Automatic function to the comfort position:  
C
briefly press button  
ond level.  
backwards to the sec-  
The button››› Fig. 148 has two levels. The  
first level switches the sunroof to the tilted po-  
sition, opening or closing it fully or partially.  
1
2
Buttons››› Fig. 149  
and  
have two levels.  
Closing the sunroof  
The first level opens or closes the sun blind  
fully or partially.  
»
D
Press button  
forwards to the first level.  
147  
Operation  
By briefly pressing the button to the second  
level, the sun blind automatically moves to  
the corresponding final position. Activating  
the button again stops the automatic func-  
tion.  
Using the Keyless Access* system (only  
closing)  
Convenience function to open or  
close the sunroof*  
Press and hold the locking sensor surface  
B
››› Fig. 150  
on the door handle to close the  
sunroof. If you release the sensor surface, the  
closing movement stops.  
Once the ignition has been switched off, you  
can still open or close the sun blind for a few  
minutes provided the driver door and the  
front passenger door are not opened.  
WARNING  
If the sunroof is used negligently or without  
paying due attention, it can cause serious  
injury.  
Opening the sun blind  
1
Press button  
to the first level.  
1
Automatic function: briefly press button  
Fig. 150 Driver door lever: sensor surfaces.  
Anti-trap function of the panoramic  
sliding sunroof and the sun blind  
to the second level.  
The sunroof can be opened and closed with  
the convenience function, just like the win-  
dows.  
Closing the sun blind  
The anti-trap function can reduce the risk of  
injury when closing the sunroof and the sun  
blind››› . If the sunroof or sun blind encoun-  
ter resistance or an obstacle when closing,  
they reopen immediately.  
2
Press button  
to the first level.  
2
Automatic function: briefly press button  
Using the door lock*  
to the second level.  
Hold the key in the door lock of the driver  
Stopping the automatic operation during  
the opening or closing  
door in either the unlocking or locking posi-  
tion to open or close the roof in the tilted po-  
sition. Release the key to interrupt this func-  
tion.  
Check why the sunroof or sun blind do not  
close.  
Try to close the sunroof or sun blind again.  
1
2
Press button  
or  
again.  
Note  
If the sunroof or sun blind cannot be closed  
Using the remote control  
due to an obstacle or some resistance, it  
stops at the corresponding position and then  
opens. For automatic closing, a new closing  
attempt might take place.  
When the sunroof is open, the electric sun  
blind can only be closed to the front edge  
of the sunroof.  
Keep the locking/unlocking button pressed  
to open/close the roof. If you release the but-  
ton is the opening/closing will stop.  
If the sunroof or sun blind is still unable to  
close, close it without the anti-trap function.  
148  

Related Topics

Popular Owner Manuals