180
Checking and refilling levels
–
Make sure that the blade faces down when fitting a blade with
integrated deflector blade.
Changing windscreen wiper blades
If the windscreen wiper blades are in perfect condition, you
will benefit from an improved visibility. Damaged wiper
blades should be replaced immediately.
If the windscreen wipers rub, they should be replaced if they are damaged,
or cleaned if they are soiled.
If this does not produce the desired results, the setting angle of the wind-
screen wiper arms might be incorrect. They should be checked by a qualified
workshop and corrected if necessary.
WARNING
Do not drive unless you have good visibility through all windows!
•
•
Clean the windscreen wiper blades and all windows regularly.
The wiper blades should be changed once or twice a year.
Caution
Fig. 126 Change wind-
screen wiper blade
•
Damaged or dirty windscreen wipers could scratch the windscreen.
Never use fuel, nail varnish remover, paint thinner or similar products to
•
clean the windows. This could damage the windscreen wiper blades.
Never move the windscreen wiper or windscreen wiper arm manually. This
Removing the wiper blade
•
–
–
–
Lift wiper arm and place the blade at right angles to the wiper
arm.
could cause damage.
Note
A
Press the retaining spring in direction of the arrow A
⇒ fig. 126.
•
The wiper arms can be moved to the service position only when the
bonnet is properly closed.
B
Unhook wiper blade in direction of arrow A ⇒ fig. 126 and
remove it from the wiper arm in the opposite direction.
Fitting the wiper blade
Fit the safety spring on the wiper arm until it clicks into place.
–