Get Unlocking and locking Guide for Seat Ibiza SUV Fifth Generation (2018-2026)

70

Unlocking and locking

Safety system “Safe”

Central locking

This is an anti-theft device consisting of a double lock for the

door locks and a deactivation function for the boot in order to

make forced entry more difficult.

Description

The central locking system enables you to lock and unlock all

the doors and the tailgate from one point.

Activation

The “safe” system is activated when the vehicle is locked using the key or the

remote control.

Central locking can be activated using any of the following options:

•

the key, by inserting it into the driver's door cylinder and rotating manu-

To activate this system with the key, rotate the key once in the door lock

cylinder in the locking direction.

ally,

•

the central locking button, (electronic control) in the passenger compart-

To activate the system using the remote control, press the lock button on the

ment ⇒ page 72.



remote

once.

•

the radio frequency remote control, using the buttons on the key

When this system is activated, it is not possible to open the doors normally,

from the outside or the inside. The boot/tailgate may not be opened. The

central locking button does not work.

⇒ page 77.

Various functions are available to improve the vehicle security:

-

Locking system “Safe”

Voluntary deactivation

Selective unlocking system*

The “Safe” system can be deactivated voluntarily by the user.

Autolocking system to prevent accidental unlocking

Speed related automatic locking system*

Locking release safety system

This is done by locking two times in quick succession (in under 2 seconds).

This double locking can be executed using the key or the remote control.

Using the key, rotate the lock cylinder twice in the locking direction.

Note

To activate the system using the remote control, press the lock button on the

For anti-theft security, only the driver's door is fitted with a lock cylinder.



remote

twice.

When the “Safe” system is deactivated, the alarm volumetric sensor is also

deactivated.

Unlocking and locking

71

When the “Safe” system is deactivated, the doors are locked using the simple

locking system, meaning that they may be opened from the interior but not

from the exterior.

Selective unlocking system*

This system allows for unlocking only the driver's door, or all

the vehicle.

Involuntary deactivation

The methods described for deactivation of the “Safe” system may be

Driver's door unlock button



executed involuntarily (for example, if we press the button

because we

This is done by a simple unlocking (once). This can be done with the key or

the remote control.

want to lock the vehicle, and it locks as a result, however, we are not sure that

it is locked and we press the button once more within 2 seconds, we will have

deactivated the “Safe” system).

With the key, rotate the key once in the lock cylinder in the unlock direction.

The driver's door will be released from the “Safe” system and unlocked and

may be opened and the indicator light will switch off. For vehicles fitted with

an alarm, this system is deactivated.

Deactivation when opening

To deactivate the system on opening, see “Selective unlocking system*”



Using the remote control, press the unlock button on the remote once. The

“Safe” status

“Safe” system is deactivated for all the vehicle, only the driver's door is

unlocked for opening, the alarm is turned off as is the light indicator.

On the driver's door, there is a light indicator visible from the outside of the

vehicle that indicates the “Safe” system status.

Unlocking all doors and the boot

We can see that the “Safe” system is activated, by the flashing of the light

indicator . The indicator will flash on all vehicles, whether they are fitted with

an alarm or not, and until the vehicle is unlocked.



So that all the doors and the boot can be opened, the unlock button

the remote must be pressed twice.

on

Remember:

The button must be pressed twice in under 2 seconds and this will deactivate

the “Safe” system for all the vehicle, all doors will be unlocked and the boot

will be activated. The indicator will be turned off as will be the alarm for those

vehicles fitted with one.

Safe activated with or without alarm: Continuous flashing of the indicator.

Safe deactivated without alarm: The indicator remains unlit.

Safe deactivated with alarm: The indicator remains unlit.

Unlocking the boot

See ⇒ page 77 and ⇒ page 82 .

WARNING

No one should remain in the vehicle if the “Safe” deadlock mechanism has

been activated. It is not possible to open the doors from the inside or the

outside and this would make any outside intervention difficult in case of

emergency. Danger of death. People could become trapped inside in an

emergency.

Safety First

Operating instructions

Tips and Maintenance

Technical Data

72

Unlocking and locking

Locking system for involuntary unlocking

WARNING

This is an anti-theft system and will avoid situations where

the vehicle is opened unintentionally

When the vehicle is in motion, the internal door release levers should not

be operated, this could cause a door to open.

The vehicle will be re-locked automatically, if it is unlocked and neither the

boot or any of the doors are opened within 30 seconds. This function

prevents the vehicle from remaining unlocked if the unlocking button is

pressed by mistake.

Emergency unlocking system

The entire vehicle is unlocked if the airbags are triggered during an accident,

except for the boot. It is possible to lock the vehicle from inside using the

central locking, after turning the ignition off and back on again.

Automatic speed dependent locking and unlocking system*

This is a safety system to prevent access to the vehicle from

the exterior when the vehicle is in transit (for example, when

stopped at a traffic light).

Central locking button

The vehicle can be locked and unlocked from the inside using

the central locking button.

Locking

The doors and the boot are automatically locked when vehicle speed exceeds

15 km/h.

If the vehicle is stopped and one of the doors is opened, when the vehicle

moves off again and exceeds a speed of 15 km/h the unlocked door(s) will be

locked once more.

Unlocking

The driver's door automatically unlocks when the key is removed from the

ignition.

Each door may be unlocked and opened from the interior (for example when

a passenger gets out). For this, simply operate the lever on the inside of the

door twice.

Fig. 43 Central locking

button

Unlocking and locking

73

Locking the vehicle

WARNING (continued)



–

Press the button

⇒

.

•

While the ignition is not activated after unlocking the door lock cylinder

with the key.

Unlocking the doors



–

Press the button

.

Note



•

Vehicle locked, button

The central locking button is still operative when the ignition is switched off.

Except, if the "safe" security system is activated.



Vehicle unlocked, button

Please note the following when you use the central locking button to lock your

vehicle:

•

It will not be possible to open the doors or the tailgate from the outside

(this may offer extra safety, for instance when stopped at traffic lights).

The driver's door cannot be locked if it is open. This prevents you from

locking yourself out of the vehicle.

Repeated operation of the central locking will deactivate the central

•

locking button for 30 seconds. Once this time has passed, the button may be

used once more.

•

There is a danger that the key may remain inside the vehicle, if the vehicle

is locked using the central locking button when the driver's door is closed

and, for example, the passenger door open. If this door is closed, then the

keys will remain inside the vehicle.

•

All doors may be locked separately from inside the car. Do this by pulling

the door release lever twice.

WARNING

•

If the vehicle is locked, children and disabled people may be trapped

inside.

•

The central locking button is not operative in the following cases.

When the vehicle is locked from the outside (using the remote or the

key).

Safety First

Operating instructions

Tips and Maintenance

Technical Data

74

Unlocking and locking

Childproof locks

This function is independent of the electronic opening and locking

systems of the vehicle. It only affects the rear doors. It is only

possible to activate it and deactivate it manually, as described

below:

The childproof lock prevents the rear doors being opened

from the inside. This system prevents minors from opening a

door accidentally while the vehicle is moving.

Activating the childproof lock

–

Unlock the car and open the door you wish to childproof.

With the door open, rotate the groove in the door using the igni-

tion key, anti-clockwise for the left hand side doors, and clock-

wise for the right hand side doors ⇒ fig. 44, ⇒ fig. 45.

Deactivating the childproof lock

–

Unlock the car and open the door for which you wish to deacti-

vate the childproof lock.

–

With the door open, rotate the groove in the door using the igni-

tion key, anti-clockwise for the right-hand side doors, and clock-

wise for the left-hand side doors ⇒ fig. 44, ⇒ fig. 45.

Fig. 44 Child safety lock

on the left hand side door

When the childproof lock is activated, the door can be opened from the

outside only. The childproof lock can be activated and deactivated using the

key in the groove when the door is open, as described above.

Fig. 45 Child safety lock

on the right hand side

door

Unlocking and locking

75

Keys

Key set

The set of keys includes a remote control, a key without a

remote control and a key tab with the number of the key.

Fig. 47 Folding key

The key set belonging to your vehicle consists of the following items:

A

•

A key with a remote control ⇒ ^{fig. 46}A

B

^{one key without remote control}A^,

Fig. 46 Set of keys

C

^{one key tab}A ^{with the key number.}

Plastic key tab

Spare keys cannot be issued without the key number on the key tab ⇒ fig. 46

B

A^{. Therefore:}

•

Always keep the key tab in a safe place.

Never leave the key tab in the vehicle.

If you sell the vehicle, please give the plastic key tab to the new owner.

Folding key*

To unfold key bit, press button. This unfolds thanks to a spring

device ⇒ fig. 47.

Safety First

Operating instructions

Tips and Maintenance

Technical Data

76

Unlocking and locking

To fold the key bit, press the button and push with the hand, until it is

correctly folded ⇒ page 75, fig. 47.

Duplicate keys

If you need a replacement key, take your key tab to an Authorised Service

Centre.

WARNING

•

Incorrect use of the keys can result in critical injuries.

Never leave children or disabled persons in the vehicle; in case of emer-

gency they may not be able to leave the vehicle or look after themselves.

•

Unsupervised use of a key could mean that the engine is started or that

electrical equipment is used (e.g. electric windows). Risk of accident. The

doors can be locked using the remote control key. This could result in

people being trapped in the vehicle in an emergency.

•

Never leave any of the vehicle keys in the vehicle. Unauthorised use of

your vehicle could result in injury, damage or theft. Always take the key

with you when you leave the vehicle.

•

Never remove the key from the ignition if the vehicle is in motion. Risk

of accident. The steering lock could engage suddenly, and you would not be

able to steer the vehicle.

Caution

There are electronic components in the key and remote control. Protect the

keys from moisture and excessive vibration.

Unlocking and locking

77

Radio frequency remote control

Locking and unlocking the vehicle

The remote control key can be used to lock and unlock the

vehicle from a distance.

Fig. 49 Range of the

remote control

The following functions can be performed using the remote control and

without using the key itself

•

Opening and closing central locking system.

Turning the anti theft alarm* and the locking security system (double

Fig. 48 Assignment of

buttons on the remote

control key

lock) on and off.

• Turning interior light on.

The radiofrequency remote control device with batteries is fitted in the head

of the vehicle key. The receiver is in the interior of the vehicle.

The indicator light for the key always flashes when the remote control is used.

The range (red zones) ⇒ fig. 49 of the remote control is shown in the

diagram. The maximum range depends on a number of circumstances.

When the batteries are running down the range is also reduced.

Opening and closing the vehicle

Toopen, place the key within the range, pointing towards the vehicle and



1

briefly press the open button

⇒ ^{fig. 48}A^{. The indicators flash twice. To}

Safety First

Operating instructions

Tips and Maintenance

Technical Data

78

Unlocking and locking



2



1

close the vehicle, press the close button briefly ⇒ ^{fig. 48}A^{. The indica-}

tors flash once.

•

If the vehicle is unlocked using the

A ^{button, the vehicle will be}

locked again automatically if any of the doors or the tailgate are not opened

within 30 seconds of unlocking the vehicle. This function prevents the vehicle

from remaining unlocked if the unlocking button is pressed by mistake.



2

By pressing the locking button twice ⇒ ^{page 77, fig. 48}A ^{both the}

locking security mechanism (double) and the volumetric alarm* are deacti-

vated but the perimetric alarm* remains active and this is indicated by the

indicator light on the driver's door.

•

If the vehicle cannot be opened and closed using the remote control, the

remote control key will have to be re-synchronised ⇒ page 78.

Selective unlocking*



1

When the button

⇒ ^{page 77, fig. 48}A ^{is used the driver's door is}

Changing the battery

unlocked, all others remain locked.



1

Press the button

⇒ ^{page 77, fig. 48}A ^{twice to unlock all doors.}

If the battery indicator does not flash when the buttons are pushed, the

battery must be replaced.

WARNING

Caution

•

Incorrect use of the key can result in critical injuries.

Never leave children or disabled persons in the vehicle; in case of emer-

Use of inappropriate batteries may damage the radio frequency remote

control. For this reason, always replace the dead battery with another of the

same size and power.

gency they may not be able to leave the vehicle or look after themselves.

•

Never leave any of the vehicle keys in the vehicle. This could result in

serious injuries, accidents or the theft of your vehicle. Always take the key

with you when you leave the vehicle.

For the sake of the environment

•

Unsupervised use of a key could mean that the engine is started or that

The flat batteries must be disposed of in accordance with regulations

governing the protection of the environment.

electrical equipment is used (e.g. electric windows). Risk of accident. The

vehicle can be locked using the remote control key. This could result in

people being trapped in the vehicle in an emergency.

Synchronising the remote control key

Note

•

The radio-frequency remote control can also be programmed so that only

the driver's door is unlocked the first time that the unlocking button on the

radio frequency remote control key is pressed. When the button is pressed

once more, all doors and the tailgate will be unlocked.

–

Use both keys that have been delivered with the vehicle; the key

with the remote and the normal key ⇒ page 77,

fig. 48 ⇒ page 77, fig. 49.

•

The remote control functions only when you are in range ⇒ page 77,

fig. 49 (red area).

Unlocking and locking

79

–

Maximum time allowed for synchronising is 30 seconds.

Anti-theft alarm system*

The normal key is used to activate the ignition, and the key with

the remote control is the key to be programmed.

Description of anti-theft alarm system*

–

Check that the car is open before commencing programming.

The anti-theft alarm triggers an alarm if unauthorised move-

ments are detected around the vehicle.

Place the key without remote control in the contact inside the

steering and ignition lock.

The anti-theft alarm makes it more difficult to break into the vehicle or steal

it. Audible and visible alarms are triggered if the car is opened using the

mechanical key, or if unauthorised access is gained to the vehicle.

–

Use the key with remote control and mechanically lock the

vehicle from the driver's door.

The anti-theft alarm system is automatically switched on when the vehicle is

locked. To lock the door either turn the key once in the lock towards the

Open and close the driver's door lock mechanically, using the

remote control key.



2

locking position or press button

A on the radio-frequency remote

control*. The system is activated immediately and the indicator light located

on the driver's door will flash along with the indicators indicating that the

alarm and the locking security system (double lock) have been turned on.



1

At the same time press the button

key.

A^{on the remote control}

When the vehicle is locked the indicator lamps light up only if the alarm has

been correctly activated (all the protection zones should be correctly closed).

Complete the procedure by removing the key from the contact

If any of the doors or the bonnet are open, when the alarm is connected these

will not be included in the protection zones of the vehicle. If the door or

bonnet is subsequently closed, they will automatically be included in the

vehicle protection zones and the indicators will flash accordingly.

It is possible that the vehicle could no longer be opened and closed with the



remote control if the button

is repeatedly pressed outside of the effective

range of the radio frequency remote control. The remote control key will have

to be resynchronised.

Spare remote control keys are available from Authorised Service Centres, they

must be matched to the locking system.

When does the system trigger an alarm?

The alarm system is triggered, in the locked vehicle, when:

•

a door

the bonnet or

the tailgate

are unduly opened

or the ignition is switched on

•

Safety First

Operating instructions

Tips and Maintenance

Technical Data

80

Unlocking and locking

The horn is sounded and the turn signals flash for approx. 30 seconds.

Volumetric sensor*

How is the alarm switched off?

Monitoring or control function incorporated in the anti-theft

alarm*, that detects unauthorized vehicle entry using ultra-

sound.

To deactivate the anti-theft alarm, rotate the key in the opening direction or



press the button

on the remote control.

•

The indicator light flashes twice on opening and the alarm is deactivated.

The indicator light flashes once on closing and the alarm is activated.

The system consists of 3 sensors, 2 emitters and a receptor.

In vehicles equipped with an additional* alarm system, if the vehicle is

opened using the driver's door key, you have 15 sec to insert the key in the

ignition lock and activate the ignition. Otherwise, the alarm will go off for 30

sec. and the ignition will be blocked.

Activation

–

It is automatically turned on with the anti-theft alarm, when the

vehicle is locked mechanically with the key and when the button



on the remote control is used.

In vehicles with keys without remote control it is necessary to wait 30 seconds

until the alarm stops. Then lock the vehicle using the key and repeat the

above process.

Deactivation

3)

–

Open the vehicle with the key, either mechanically or by

If the vehicle is opened at any door other than the driver's door or the tailgate

the alarm will go off for 30 seconds.



pressing the button

on the remote control.



Press the button

on the remote control twice. Only the volu-

metric sensor is deactivated. The alarm system remains acti-

vated.

Note

•

After 28 days the indicator light will switch off to prevent the battery

running down where the vehile has been left parked for a long period of time.

The alarm system remains activated.

The interior monitoring system will be switched on automatically with the

anti-theft alarm. All of the doors and the tailgate must be closed to activate

the sensor of the interior monitoring system.

•

If, after the alarm has stopped, attempts are made to open another

protection zone, the alarm will be triggered again.

The alarm system can be activated or deactivated using the remote

control ⇒ page 77.

The interior monitor should be switched off, if for example animals are briefly

left in the locked vehicle. Their movements could otherwise trigger an alarm.

•

The interior monitor should also be deactivated if the windows are left

slightly open, otherwise the alarm may be triggered due to the effect caused

by wind entering the vehicle.

3)

The time period from when the door is opened until the key is inserted in the contact

should not exceed 15 sec., otherwise the alarm will be triggered.

Unlocking and locking

81

Note

•

If, after deactivating the volumetric sensor, the vehicle is locked using the

remote control or the key in the door lock in under 30 seconds, the volumetric

sensor will remain deactivated. The other functions of the antitheft alarm*

will remain activated. After this time, the deactivation function of the volu-

metric sensor is cancelled.

•

If the vehicle is relocked and the alarm is activated without the volumetric

sensor function, relocking will activate the alarm with all its functions, except

the volumetric sensor. This function is reactivated when the alarm is next

switched on, unless it is deliberately switched off.

•

If the alarm has been triggered by the volumetric sensor, this will be indi-

cated by a flashing of the indicator on the driver's door. The flash is different

to the flash indicating the alarm is activated.

•

If the alarm is triggered three times by the volumetic sensor, the alarm

system is no longer triggered.

Triggering caused by other sensors (doors, boot opening, etc.) will

continue

•

Safety First

Operating instructions

Tips and Maintenance

Technical Data

82

Unlocking and locking

Tailgate

Opening and locking

The operation of the tailgate opening system is electric. It is

activated by using the handle on the tailgate

Fig. 51 Closing the tail-

gate

Opening the tailgate

–

Pull on the release lever and lift the tailgate ⇒ fig. 50. The

keyhole should now be in a vertical position ⇒ ^{fig. 51}A^.

a

Closing the tailgate

Fig. 50 Tailgate: Opening

from the outside

–

Grip the tailgate by the handle on the interior lining and close it,

using a light movement.

a

When the keyhole A⇒ fig. 51 is in a vertical position, the tailgate will open

and lock automatically using the central locking system. Also, the tailgate

may be opened and locked using a key.

b

^{When the keyhole is in a horizontal position}A⇒ fig. 51, if the tailgate is

closed it remains locked and can only be opened using the main key.

c

^{To open the tailgate the key must be turned all the way}A⇒ fig. 51, in the

direction of the arrow. In this position the key may not be removed from the

lock.

Unlocking and locking

83

If the keyhole is in horizontal position, this implies that the tailgate is locked

and can only be opened using the main key.

Windows

Opening or closing the windows electrically

WARNING

The front and rear electric windows can be operated using the

controls in the driver's door.

•

Always close the tailgate properly. Risk of accident or injury.

Do not close the tailgate by pushing it down with your hand on the

window. The glass could shatter. Risk of injury!

•

Ensure the tailgate is locked after closing. If not, it may open unexpect-

edly while driving.

Never allow children to play in or around the vehicle. A locked vehicle

•

can be subjected to extremely high and low temperatures, depending on

the time of year. This could cause serious injuries/illness. It could even

have fatal consequences. Close and lock both the tailgate and all the other

doors when you are not using the vehicle.

•

Never close the tailgate without observing and ensuring it is clear, to do

otherwise could cause serious injury to you and others. Make sure that no

one is in the path of the tailgate.

Fig. 52 Section of the

driver door: controls for

the front and rear

windows

•

Never drive with the tailgate open or half-closed, exhaust gasses may

penetrate into the interior of the vehicle. Danger of poisoning!

If only the boot is opened then do not leave the key inside. The vehicle

may not be opened if the key is left inside.

•

Opening and closing the windows



–

Press the button

to open a window.



Pull button

to close a window ⇒

.

Always close the windows fully if you park the vehicle or leave it unattended

⇒

.

You can use the electric windows for approx. 10 minutes after switching off

the ignition if neither the driver door nor the front passenger door has been

opened and the key has not been removed from the ignition.

Safety First

Operating instructions

Tips and Maintenance

Technical Data

84

Unlocking and locking

Buttons in the driver door

WARNING (continued)

1

A ^{Button for window in front left door}

•

If necessary, use the safety switch to disable the rear electric windows.

2

A ^{Button for window in front right door}

Make sure that they have been disabled.

Buttons for rear windows*

3

A ^{Safety switch for deactivating the electric window buttons in the rear}

doors

Note

If the window is not able to close because it is stiff or because of an obstruc-

tion, the window will automatically open again ⇒ page 85. If this happens,

check why the window could not be closed before attempting to close it

again.

4

A ^{Button for window in rear left door}

5

A ^{Button for window in rear right door}

Safety switch *

3

Safety switch Ain the driver door can be used to disable the electric window

buttons in the rear doors.

One-touch opening and closing*

Safety switch not pushed in: the buttons in the rear doors are enabled.

Safety switch pushed in: the buttons in the rear doors are disabled.

The one-touch opening and closing function is only possible

on the front doors and can only be activated from the driver's

door.

WARNING

•

Incorrect use of the electric windows can result in injury.

One-touch closing

Never close the tailgate without observing and ensuring it is clear, to do

–

Pull up the button for the window briefly to the second position.

The window closes fully.

otherwise could cause serious injury to you and others. Make sure that no

one is in the path of a window.

•

Always take the vehicle key with you when you leave the vehicle.

Never leave children or disabled persons in the vehicle, particularly if

One-touch opening

–

Push down the button for the window briefly to the second posi-

tion. The window opens fully.

they have access to the keys. Unsupervised use of a key could mean that

the engine is started or that electrical equipment is used (e.g. electric

windows). Risk of accident. The doors can be locked using the remote

control key. This could result in people being trapped in the vehicle in an

emergency.

Restoring one-touch opening and closing

Close all windows.

–

•

The electric windows will work until the key has been removed from the

ignition and one of the front doors has been opened.

Unlocking and locking

85

The one-touch function and roll-back function will not work if there is a

malfunction in the electric windows. Contact an Authorised Service Centre.

–

Use the key to lock the vehicle from outside and hold the key in

the lock position for at least one second. The one-touch function

is now ready for operation.

WARNING

1

2

The buttons ⇒ ^{page 83, fig. 52}A ^andA ^{have two levels for opening the}

window and two for closing it. This makes it easier to open or close windows

to the desired position.

•

Incorrect use of the electric windows can result in injury.

Always take the key with you when leaving the vehicle, even if you only

intend to be gone for a short time. Please ensure that children are never left

unsupervised in the vehicle.

One-touch closing does not work when the ignition has been switched off,

even if the key is in the ignition.

•

The electric windows will work until the key has been removed from the

ignition and one of the front doors has been opened.

Never close the tailgate without observing and ensuring it is clear, to do

The automatic open and close function will not work if the battery has been

temporarily disconnected, or if the battery is flat. The function then has to be

reactivated.

•

otherwise could cause serious injury to you and others. Make sure that no

one is in the path of a window.

The one-touch function and roll-back function will not work if there is a

malfunction in the electric windows. Contact an Authorised Service Centre.

•

Never allow people to remain in the vehicle when you close the vehicle

from the outside. The windows cannot be opened even in an emergency.

Roll-back function

Note

The roll-back function is deactivated if the windows are closed from the

outside of the vehicle using the ignition key for convenience closing

⇒ page 85.

The windows have a roll-back function. This reduces the risk

of injuries when the windows are closing.

•

If a window is obstructed when closing automatically, the window stops

at this point and lowers immediately ⇒

If this happens, check immediately (within 10 seconds) why the window

.

Convenience opening and closing*

Using the door lock

•

could not be closed before attempting to close it again. After 10 seconds the

normal automatic function resumes.

•

If the window is still obstructed, the window stops at this point.

If there is no obvious reason why the window cannot be closed, try to

–

Hold the key in the door lock of the driver door in either the

locking or the unlocking position until all windows are either

opened or closed.

close it again within five seconds.

If you wait longer than 10 / 5 seconds, the window will open fully when you

operate one of the buttons. One-touch closing is reactivated.

–

Release the key to interrupt this function.

Safety First

Operating instructions

Tips and Maintenance

Technical Data

86

Unlocking and locking

Tilting the sliding/tilting sunroof

Sliding/tilting roof*

D

–

^{Turn the rotary button to position}A^.

Opening and closing the sliding/tilting roof

Always close the sliding/tilting roof fully if you park the vehicle or leave it

unattended ⇒

.

The sliding/tilting sunroof is opened and closed using the

rotary button when the ignition is switched on.

The sliding/tilting sunroof can be operated for up to about ten minutes after

the ignition has been switched off, provided the driver door and the front

passenger door are not opened.

Sunroof blind

The sunroof blind is opened together with the sliding/tilting roof. If required,

it can be closed by hand when the sunroof is closed.

WARNING

•

Incorrect use of the sliding/tilting sunroof can result in injury.

Never close the sliding/tilting sunroof without observing and ensuring

it is clear, to do otherwise could cause serious injury to you and others.

Make sure that no one is in the path of the sliding/tilting sunroof.

Fig. 53 Detail of the

sunroof: rotary button for

sliding/tilting sunroof

•

Always take the vehicle key with you when you leave the vehicle.

Never leave children or disabled persons in the vehicle, particularly if

they have access to the keys. Unsupervised use of a key could mean that

the engine is started or that electrical equipment is used (e.g. electric

sliding/tilting sunroof). Risk of accident! The doors can be locked using the

remote control key. This could result in people being trapped in the vehicle

in an emergency.

Closing the sliding/tilting sunroof

A

–

^{Turn the rotary button to position}A ⇒ fig. 53 ⇒

.

Opening/tilting the sliding/tilting sunroof

B

–

^{Turn the rotary button to position}A^{. The sunroof opens to the}

convenience position where wind noise is reduced.

•

The sliding/tilting sunroof continues to function until one of the front

doors is opened and the key removed from the ignition.

C

–

^{To open the roof further, turn the switch to position}A ^{and hold}

the switch in this position until the roof opens to the desired

position.

Unlocking and locking

87

Convenience closing*

Using the door lock

–

Hold the key in the door lock of the driver's door in the locking

position until the sliding/tilting sunroof is closed.

–

Release the key to interrupt this function.

Note

The sliding/tilting sunroof rotary button remains in the last position selected

if the roof is closed using convenience closing from outside the vehicle and

will have to be re-positioned the next time you drive.

Fig. 55 Emergency

closing handle

Roll-back function of the sliding/tilting roof*

The sliding/tilting roof has a roll-back function which prevents larger objects

getting trapped when the roof is closed. The roll-back function does not

prevent fingers getting pinched against the roof opening. The sliding/tilting

sunroof stops and opens again immediately if it is obstructed when closing.

If the sliding/tilting roof has been opened again by the roll-back function, it

A

^{can be closed only by pressing the rotary button at the front in position}A

⇒ fig. 54 until the sliding/tilting roof has closed fully. Please note that the

sunroof will now close without the roll-back function.

Operation in the event of a breakdown

In the event of a breakdown, the sunroof may be closed manually.

•

Remove the plastic cover by inserting a screwdriver in the rear section.

Remove the lever from the cover fastening, insert it in the opening as far

Fig. 54 Detail of the

sunroof: rotary button for

sliding/tilting sunroof

as possible (pushing against the spring) and close the sliding roof.

•

Fit the lever back into position.

Safety First

Operating instructions

Tips and Maintenance

Technical Data

Unlocking and locking for Your Seat Ibiza SUV Fifth Generation (2018-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals