Technical specifications
Abbreviations used in the Technical Speci-
fications section
VIN in the Easy Connect
Technical data
●
Select: button / and the Vehicle >
SETTINGS > Service > Chassis number
kW
Kilowatt, engine power measurement.
function button.
Technical specifications
Pferdestärke (horsepower), formerly
used to denote engine power.
PS
Chassis number
Important information
rpm, 1/min Revolutions per minute - engine speed.
The VIN is located in the Easy Connect and
under the windscreen, on the driver side
Nm
CZ
Newton metres, unit of engine torque.
Important
Fig. 319. Additionally, the chassis number
›››
Cetane number, indication of the die-
sel combustion power.
is located in the engine compartment, on the
right-hand side. The number is engraved on
the top side rail, and is partially covered.
The information in the vehicle documentation
always takes precedence over the informa-
tion in this Instruction Manual.
Research octane number, indication of
the knock resistance of petrol.
RON
All technical specifications provided in this
documentation are valid for the standard
model in Spain.
Identification plate
The type plate is located on the right side
door pillar. Vehicles for certain export coun-
tries do not have a type plate.
Vehicle identification data
The figures may be different depending
whether additional equipment is fitted, for dif-
ferent models, for special vehicles and for
other countries.
Identifying letters
The identifying letters of the engine can be
viewed on the instrument panel when the en-
gine is switched off and the ignition is on.
●
Hold down the button 0.0/SET on the dash
panel for more than 15 seconds.
Fig. 319 Chassis number.
355
English 
