2021-2026 Seat Leon 4 Door Infotainment system -> Data transfer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system -> Data transfer for Your Seat Leon 4 Door Fourth Generation (2021-2026)

Infotainment system  
Connectivity statuses  
CAUTION  
Data transfer  
Full connectivity, all services active  
The vehicle may be damaged by factors  
outside the control of SEAT, S.A. These  
damaged can include:  
(white)  
(grey)  
SEAT CONNECT  
Limited connectivity, some services  
may not be available.  
●
●
●
Misuse of mobile terminals  
Introduction  
No connectivity, no services availa-  
ble.  
Data loss during transmission.  
Unsuitable or defective third party appli-  
no icon  
To use it, SEAT CONNECT must first be activa-  
ted online by entering into a SEAT CONNECT  
contract with SEAT, S.A. and is subject to a  
temporary use limitation depending on the  
country.  
cations.  
SEAT CONNECT's voice recognition or search  
technology does not recognise or offer re-  
sults for all words.  
●
Malicious software on data storage devi-  
ces, computers, tablets or mobile phones.  
There are SEAT CONNECT services for which  
registration is mandatory and others for  
which it is not mandatory.  
Both the SEAT CONNECT service portfolios  
offered by SEAT and individual services can  
be modified, cancelled, deactivated, reacti-  
vated, renamed and extended, even without  
prior notification.  
Services portfolio  
The initial service allocation shown here cor-  
responds to the third generation of SEAT  
CONNECT services and represents the maxi-  
mum services portfolio. The maximum possi-  
ble portfolio is only available on some vehicle  
models. During the useful life of the vehicle,  
you can change the assignment shown here.  
Description of services  
Before running SEAT CONNECT services,  
read and take into account the description of  
the corresponding services. Descriptions are  
updated non-periodically and are available  
online at https://my.seat.  
In https://my.seat you can create the user  
account, see the description of services and  
more information.  
The execution and availability of the SEAT  
CONNECT services and service portfolios  
may vary depending on the country, as well  
as the vehicle, its equipment and connectivi-  
ty.  
●
Always use the most up-to-date version of  
After activating the services management in  
the infotainment system you can check if the  
vehicle has services and what they are.  
the corresponding service description.  
WARNING  
In some countries and in the event of a con-  
tract renewal, the services offered may be  
combined differently than indicated here.  
They may also vary depending on the year of  
production of the vehicle. The services men-  
tioned correspond to the third generation of  
SEAT CONNECT.  
In areas with insufficient mobile phone and  
GPS coverage, neither emergency calls or  
phone calls can be made, and data cannot  
be transmitted. Change location if possi-  
ble.  
182  
Data transfer  
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SEAT CONNECT services and functions  
that do not require activation  
Zone warning  
Remote air conditioning  
Speed warning  
Electrical power manager  
Departure times  
The following services also work without the  
activation of SEAT CONNECT:  
Online map update  
Search for points of interest  
Petrol stations  
plus all SEAT CONNECT services in the pre-  
vious section page 183.  
›››  
●
●
●
Public emergency call service.  
Privacy mode.  
Online traffic information  
Parking lots  
SEAT CONNECT individual options  
Legal.  
●
In-Car Applications. These applications  
Online infotainment system update  
Online route calculation  
Information on risks  
can be purchased and installed directly in  
the infotainment system through the In-Car  
store.  
SEAT CONNECT services  
The SEAT CONNECT services are:  
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Private emergency call  
Public emergency call  
Roadside assistance call  
Customer support  
●
●
Full Link.  
Dictation  
Data package. Pay per use data rates for  
Natural voice control for infotainment, me-  
the use of online functions, for example, 2 GB  
per month.  
dia and radio apps  
●
Natural voice control for destinations and  
addresses  
Service appointment planning  
Online system update  
Note  
●
●
●
●
●
●
●
●
Online radio  
●
The public emergency call service is  
Online media  
Customisation  
available regardless of whether the info-  
tainment system is logged in.  
Online route import  
Online destination import  
Remote auxiliary ventilation  
Parking position  
Privacy mode  
Activating SEAT CONNECT  
Private mode (deactivation of services)  
Delete user / Reset factory settings  
Remote independent heating  
Remote opening  
●
Customisation and purchase of In-Car  
applications require logging into infotain-  
ment system, but the activation of the vehi-  
cle in a SEAT CONNECT account is not nec-  
essary.  
Legal  
Horn and turn signals  
Vehicle status incl. doors and lights  
Driving data  
SEAT CONNECT services for hybrid vehi-  
cles  
Vehicle status report  
Available only in electric and hybrid vehicles.  
Anti-theft alarm warning  
183  
Infotainment system  
Update option  
Activation of SEAT CONNECT and S-  
PIN  
Ownership and identity accredita-  
tion  
10" Infotainment  
yes  
yes  
yes  
yes  
Activating SEAT CONNECT  
Become main user (ownership accredita-  
tion). 2-Key method.  
8.25” Infotainment  
The following steps are necessary for the ac-  
tivation of SEAT CONNECT (including regis-  
tration):  
SEAT CONNECT portal  
SEAT CONNECT application  
To become a main user and thus prove own-  
ership of the vehicle, you need both of the ve-  
hicle’s physical keys. Ownership accredita-  
tion takes place in the vehicle during registra-  
tion or, if you already have a SEAT CONNECT  
user account, you must log in through the in-  
fotainment system and then go to User man-  
agement  
●
Create a user account at https://my.seat or  
directly through the infotainment system in  
the User Management menu.  
More information at https://my.seat/faqs.  
S-PIN  
●
Place the SEAT CONNECT order and acti-  
vate it.  
The S-PIN is a sequence of several digits,  
which can be selected when completed the  
SEAT CONNECT registration.  
●
●
●
Add the vehicle to your user account.  
Prove ownership.  
●
Switch on the ignition and the infotainment  
system.  
When creating the S-PIN, avoid easy-to-  
guess number sequences and known dates  
of birth. You can change the S-PIN in the SEAT  
CONNECT user account in “Account set-  
tings”.  
Prove your identity. It is only necessary if  
you are to run SEAT CONNECT services rele-  
vant to security.  
●
In the infotainment system, register in SEAT  
CONNECT.  
●
Or: open the menu Users > Settings >  
Become primary user and follow the in-  
●
You can activate it at https://my.seat or di-  
The S-PIN is necessary, for example, to pro-  
tect your user profile or to run a SEAT CON-  
NECT service relevant to the security of your  
vehicle.  
rectly through the infotainment system. To  
activate it through the infotainment system,  
proceed as follows:  
structions.  
●
Press the unlock button on the first vehicle  
key.  
●
10" Users > Settings > Become primary  
Press the unlock button on the second vehi-  
You must manage this S-PIN with absolute  
confidentiality. If you reveal the S-PIN to third  
parties, for security reasons you must change  
it immediately.  
user.  
cle key.  
8.25" MENU > Manage users > Become pri-  
Once the infotainment system has processed  
the orders by radiofrequency, the accredita-  
tion of the ownership will have been comple-  
ted. You can control the current status in the  
SEAT CONNECT portal.  
mary user.  
Follow the rest of the indications and the in-  
formation shown in the infotainment system.  
During activation, you may be asked to cre-  
ate an S-PIN.  
184  
Data transfer  
friends), data protection and personal rights  
are respected. Therefore, you must inform  
drivers in advance that the vehicle transfers  
and receives data online, and that you can  
access such data.  
console). The absence of the marking on the  
vehicle does not guarantee that the control  
unit does not transmit the vehicle’s current  
geographical position and speed.  
How is ownership accredited?  
10” Infotainment  
2-Key method.  
2-Key method.  
8.25” Infotainment  
SEAT CONNECT portal No, it is not possible  
Personal information  
Not taking into account this obligation to in-  
form, can infringe certain rights of the occu-  
pants.  
SEAT protects your personal data and only  
uses them, as long as the law allows it or you  
have given your consent on the occasion of a  
use. You will find detailed information on data  
processing in relation to SEAT CONNECT  
services in the Privacy Policy, which you can  
access in its corresponding current version  
on the SEAT website.  
SEAT CONNECT appli- No, it is not possible  
cation  
Users can manage data sending and trans-  
fers through the privacy mode at any time.  
More information at: https://my.seat/faq.  
Identity accreditation (SEAT Ident)  
Identity accreditation must be done before  
you can use SEAT CONNECT services that  
are relevant to security, such as the “Remote  
Opening” service. Identity accreditation can  
be done in two ways:  
Follow-up services: ask all occupants  
The follow-up services need geographical  
and vehicle data to determine whether the  
vehicle is being used within defined speed  
ranges, where it has been parked or if it is be-  
ing used in an established geographical area.  
This information is displayed on the SEAT  
CONNECT portal and in the SEAT CONNECT  
app.  
Permanent transfer of the vehicle  
●
●
In person at the SEAT dealership.  
If another person has left you the vehicle for  
permanent use (for example, if you buy a  
used vehicle), SEAT CONNECT may already  
be activated and the previous user still has  
the possibility of accessing the data regis-  
tered through SEAT CONNECT and control  
certain functions of your vehicle.  
You can find more information about SEAT  
Ident on the SEAT CONNECT portal at  
https://my.seat.  
Therefore, before moving off, ask all the vehi-  
cle occupants if they agree with the activa-  
ted services. If they do not, deactivate the  
service in question (if possible) or do not al-  
low the occupants to use the vehicle.  
Legal provisions  
In the infotainment system you can check if  
your vehicle is assigned to a person as the  
main user. In this case, you can register your-  
self as the main user of the vehicle and thus  
automatically delete the previous main user.  
Alternatively, through the infotainment sys-  
tem you can directly and permanently delete  
the previous user as the main user, as well as  
put the vehicle in offline mode and thus limit  
both the communication of your vehicle with  
During the use of SEAT CONNECT services,  
information is transferred and processed on-  
line through the vehicle. Such data can also  
provide (at least indirectly) information about  
the driver in question, for example, driving be-  
haviour and location. As a contracting party  
in the SEAT CONNECT contract with SEAT,  
S.A., you must ensure that when your vehicle  
is used by other drivers (for example, family or  
GPS tracking: marking  
If the vehicle has a factory-assembled con-  
trol unit that transmits the its current geo-  
graphical position and speed, the vehicle  
usually has this GPS marking (e.g., on the roof  
»
185  
Infotainment system  
●
the SEAT, S.A. data server and the processing  
of personal and vehicle data.  
Maintenance, repair, deactivation, software  
Service management  
update and technical expansion of telecom-  
munication equipment, satellites, servers and  
data banks.  
Open the settings in Users and go to Privacy  
and Services. You can do the following in the  
infotainment system:  
●
Deactivating SEAT CONNECT serv-  
ices  
Change of the mobile telephony standard  
for the transmission of mobile data by the tel-  
ecommunications service provider, for exam-  
ple, from UMTS to EDGE or GPRS.  
●
Check which SEAT CONNECT services are  
currently available in the vehicle.  
The following functions are available in the  
infotainment system to deactivate and acti-  
vate SEAT CONNECT services:  
●
The number of SEAT CONNECT services  
that are enabled or disabled.  
●
Disconnection of an existing mobile phone  
standard by the telecommunications service  
provider.  
●
Activate or deactivate SEAT CONNECT  
services.  
●
●
Central deactivation or activation  
Individual deactivation or activation  
●
Interference, disturbance or interruption in  
the reception of the mobile phone and GPS  
signal due to aspects such as high-speed  
driving, solar storms, meteorological influen-  
ces, topography, blocking equipment and the  
intensive use of mobile phones in the radio  
cells in question.  
More information at https://my.seat.  
You can rerun the corresponding services af-  
ter cancelling their deactivation in the info-  
tainment system.  
Privacy and Services Settings  
SEAT CONNECT services can be activated  
and deactivated individually. To do this, just  
check the box corresponding to the service  
you want to activate or deactivate. Use the  
privacy mode option if you want to deacti-  
vate all of the services at the same time.  
Note  
●
When in areas with zero or insufficient mo-  
The services required by law and their data  
transmission, such as the public emergen-  
cy call system, cannot be disconnected or  
deactivated.  
bile telephony or GPS signal. Also, for exam-  
ple, in tunnels, confined areas between very  
tall buildings, garages, underpasses, moun-  
tains and valleys.  
Privacy mode  
●
External information from third party sup-  
Allows you to deactivate or activate the serv-  
ices depending on the selected privacy level.  
plies available with limitations, incomplete or  
incorrect, e.g. representations of maps.  
Faults  
Even if the prerequisites for the use of SEAT  
CONNECT services are met, there may be  
factors beyond the control of SEAT, S.A. that  
interfere with the execution of such services  
or prevent them. These may be specifically:  
●
Countries and regions where SEAT CON-  
NECT is not offered.  
Share location. Main users and co-  
users can view position data on the  
SEAT CONNECT portal or app.  
Tracking  
Use location. Position, vehicle, and  
user data are used for services.  
Location  
186  
Data transfer  
●
The following technologies may be availa-  
ble:  
Access the Full Link main menu, unless it  
appears automatically.  
No location. Only the vehicle data  
and user data are used for services.  
Personal  
●
●
●
●
Select the mobile phone device and the  
technology you want.  
Apple CarPlay™  
Android Auto™  
MirrorLink®  
Maximum privacy. Your services are  
disabled. Only services required for  
legal reasons use data.  
Incognito  
●
Confirm authorisation inquiries on the mo-  
bile phone device to grant the necessary au-  
thorisations to the infotainment system.  
The availability of the technologies that Full  
Link includes depends on the country and the  
mobile phone device used.  
Setting options are not available in all mar-  
kets or in all vehicle models.  
●
Disconnect the USB connection and con-  
nect with the infotainment system again via  
Wi-Fi or Bluetooth®. Wireless Full Link is now  
configured.  
Note  
You will find more information on the SEAT  
website (www.seat.com).  
If you deactivate each and every SEAT  
CONNECT service, the OCU may continue  
to transmit data.  
The pairing has concluded. The connected  
mobile phone device can also use Wireless  
Full Link from now on without the USB con-  
nection.  
Access the Full Link main menu  
Browsing the Full Link main menu depends on  
the infotainment system used.  
Full Link  
If pop-up menus are rejected during the con-  
nection process, Wireless Full Link will not be  
available. In this case, SEAT recommends de-  
leting the devices in both the telephone set-  
tings and the infotainment system, and re-  
starting the connection process.  
●
Click on Full Link.  
Introduction  
Configure Wireless Full Link  
In order to use Wireless Full Link, you must first  
pair the mobile phone device with the info-  
tainment system. To do this, proceed as fol-  
lows:  
With Full Link it is possible to view and use the  
contents and functions that are shown on the  
mobile phone device on the infotainment  
screen.  
WARNING  
The use of applications while driving can  
distract your attention from the traffic. Any  
distraction affecting the driver in any way  
can lead to an accident and cause injuries.  
To do this, the mobile phone device must be  
connected with the infotainment system  
through a USB interface.  
Connect a mobile phone device for the first  
time.  
●
Unlock the mobile phone device.  
●
Some technologies can also be used by  
Wireless Full Link through the Bluetooth® in-  
terface and a Wi-Fi connection.  
Enable Wi-Fi reception and Bluetooth® on  
●
Always drive as carefully and responsibly  
the mobile phone device.  
»
as possible.  
●
Connect the mobile phone device to the in-  
fotainment system using a USB cable or via  
Bluetooth®.  
187  
Infotainment system  
Applications (apps)  
To select Apple CarPlay technology.  
To select Android Auto™ technology.  
To select Mirror Link® technology.  
WARNING  
Any applications that are not suitable or  
execute incorrectly may cause damage to  
the vehicle, accidents and serious injuries.  
With SEAT Full Link, the display of the con-  
tents of SEAT applications and other provid-  
ers installed on mobile phone devices can be  
transferred to the infotainment screen.  
●
Protect the mobile phone device and its  
applications from inappropriate use.  
Apple CarPlay™  
In the case of third-party applications, there  
may be compatibility problems.  
●
Never carry out modifications to the ap-  
plications.  
In order to use Apple CarPlay, the following  
requirements must be met:  
Applications, their use and the necessary  
mobile phone connection may be pay per  
use.  
●
Follow instructions in the instruction  
manual for the mobile phone device.  
●
The iPhone™ must be compatible with Ap-  
ple CarPlay™.  
●
CAUTION  
Voice control (Siri ™) must be active on the  
iPhone™.  
The offer of applications can be varied and  
designed for a vehicle or a specific country.  
The content and volume of applications, as  
well as the companies that offer them, may  
vary. Some applications also depend on the  
availability of third-party services.  
SEAT cannot be held liable for any damage  
caused to the vehicle as a result of the use  
of applications that are of poor quality or  
are defective, the inadequate program-  
ming of the applications, the insufficient  
coverage of the network, the loss of data  
during transmission or the improper use of  
mobile phone devices.  
●
Apple CarPlay™ must be active without  
limitations in the iPhone™ settings.  
●
The iPhone ™ must be connected to the in-  
fotainment system via a USB connection. On-  
ly USB connections with data transmission  
are suitable for the use of Apple CarPlay™.  
It cannot be guaranteed that all the applica-  
tions offered will work on all mobile phone  
devices or with all their operating systems.  
●
The USB cable used must be an original  
Apple™ cable.  
The applications offered by SEAT can be  
modified, cancelled, deactivated, reactivated  
and extended without prior notification.  
Note  
Apple CarPlay™ Wireless: Bluetooth® and  
Wi-Fi must also be activate on the iPhone™.  
●
Wireless Full Link may not be compatible  
with all technologies.  
To avoid distracting the driver while driving,  
only certified applications can be used.  
●
Wireless Full Link (Android Auto ™ and Ap-  
Establish connection  
ple CarPlay ™) is disabled in countries  
whose radio frequency regulations do not  
allow it to operate.  
When you first connect an iPhone™, follow  
the instructions on the infotainment system  
screen and on the iPhone ™.  
Full Link symbols and settings  
The requirements must be met to use Apple  
CarPlay™.  
To show more information  
To open the Full Link settings menu  
188  
Data transfer  
Launch Apple CarPlay™:  
started interrupts the one that was previously  
active.  
Android Auto™  
●
Press Full Link to access the Full Link  
Requirements for Android Auto™  
main menu.  
●
Depending on the infotainment system you  
use, on the instrument panel screen you can  
view data from the Telephone and Media  
mode.  
●
In order to use Android Auto™, the following  
requirements must be met:  
Press Apple CarPlay™ to establish a con-  
nection with the iPhone™.  
●
The mobile phone device, called smart-  
Disconnecting  
●
With the multifunction steering wheel you  
phone from here on, has to be compatible  
with Android Auto™.  
can accept or reject incoming calls, as well  
as end an ongoing telephone conversation.  
●
On the Apple CarPlay™ mode, press the  
SEAT icon to access the Full Link main menu.  
●
The smartphone must have an Android Au-  
to™ application installed.  
●
Press to interrupt the active connection.  
Voice control  
●
The smartphone has to be connected  
The representation of function buttons on the  
screen may vary.  
●
Press briefly to start voice control using  
the infotainment system.  
through the USB connection with data trans-  
mission with the infotainment system.  
●
Press this button for a long time to start  
●
The USB cable used must be an original ca-  
Special characteristics  
voice control (Siri™) of the connected  
iPhone™.  
ble provided by the smartphone manufactur-  
er.  
During an active Apple CarPlay™ connection,  
the following characteristics are applicable:  
Note  
●
Bluetooth® connections between the  
Establish connection  
●
The availability of technologies depends  
iPhone™ and the infotainment system are not  
possible.  
When you first connect a smartphone, follow  
the instructions on the infotainment system  
screen and on the smartphone.  
on the country and may vary.  
●
You will find information about technical  
●
If there is an active Bluetooth® connection,  
it is automatically interrupted.  
requirements, compatible iPhones, certi-  
fied applications and their availability on  
the SEAT (www.seat.com) and Apple Car-  
Play ™ websites, or at SEAT dealerships.  
The requirements must be met to use Android  
Auto™.  
●
The phone functions are only available  
through Apple CarPlay™. The functions de-  
scribed for the Infotainment system are not  
available.  
Launch Android Auto™:  
●
Press Full Link to access the Full link  
main menu  
●
The connected iPhone™ cannot be used as  
a multimedia device in the Media main menu.  
●
Press Android Auto™ to establish a connec-  
●
»
It is not possible to use the built-in naviga-  
tion with the smartphone.  
tion system and the Apple CarPlay™ naviga-  
tion system at the same time. The last route  
189  
Infotainment system  
●
Disconnecting  
voice control  
Depending on the mobile phone device  
used, a Car-Mode application that is suitable  
for using MirrorLink® must be installed.  
●
●
In Android Auto™ mode, press the Exit/SEAT  
icon to access the Full Link main menu.  
Press briefly to start voice control using  
the infotainment system.  
●
●
Press to interrupt the active connection.  
Press and hold this button to start voice  
Establish connection  
control (Google Assistant) on the connected  
smartphone.  
When you first connect a mobile phone de-  
vice, follow the instructions on the infotain-  
ment system screen and on the mobile phone  
device.  
Special characteristics  
During an active Android Auto™ connection,  
the following characteristics are applicable:  
Note  
●
The availability of technologies depends  
●
An active Android Auto™ device can be  
The requirements must be met to use Mirror-  
Link™.  
on the country and may vary.  
connected at the same time via Bluetooth®  
(HFP profile) with the infotainment system.  
●
You will find information about technical  
requirements, compatible mobile phone  
devices, certified applications and their  
availability on the SEAT (www.seat.com)  
and Android Auto™ websites, or at SEAT  
dealerships.  
●
It is possible to use the phone’s functions  
Launch MirrorLink®:  
through Android Auto™. If the Android Auto™  
device is connected at the same time via  
Bluetooth® with the infotainment system, the  
telephone function of the infotainment can  
also be used.  
●
Press Full Link to access the Full Link  
main menu.  
●
Press to establish the connection with the  
mobile phone device.  
●
An active Android Auto™ device cannot be  
Disconnecting  
MirrorLink®  
used as a multimedia device in the Media  
main menu.  
●
In the MirrorLink® mode, press the APP icon  
to access the Full Link main menu.  
Requirements for MirrorLink®  
●
It is not possible to use the built-in naviga-  
In order to use MirrorLink™, the following re-  
quirements must be met:  
●
OR: press to access the MirrorLink® main  
menu.  
tion system and the Android Auto™ navigation  
system at the same time. The last route star-  
ted interrupts the one that was previously ac-  
tive.  
●
The mobile device must be compatible with  
MirrorLink™.  
●
Press to interrupt the active connection.  
●
The mobile phone device must be connec-  
ted to the infotainment system via a USB con-  
nection that is suitable for data transmission.  
Special characteristics  
●
On the instrument panel screen you can  
view data from the Telephone and Media  
mode.  
During an active MirrorLink® connection, the  
following characteristics are applicable:  
●
The USB cable used must be an original ca-  
ble provided by the mobile phone device  
manufacturer.  
●
With the multifunction steering wheel you  
●
An active MirrorLink® device can be con-  
can accept or reject incoming calls, as well  
as end an ongoing telephone conversation.  
nected to the infotainment system at the  
same time via Bluetooth®.  
190  
Data transfer  
●
If the MirrorLink® device is connected to the  
Press to return to the MirrorLink® main  
menu.  
erators can provide the relevant informa-  
tion.  
infotainment system via Bluetooth®, the tele-  
phone function of the infotainment system  
can be used.  
●
The exchange of data packages may  
Note  
generate additional costs, depending on  
your mobile phone rate, particularly if you  
are abroad (for example, roaming rates).  
●
You cannot use an active MirrorLink® de-  
You will find information about technical re-  
quirements, compatible mobile phone de-  
vices, certified applications and their avail-  
ability on the SEAT (www.seat.com) and  
MirrorLink® websites, or at SEAT dealer-  
ships.  
vice as a multimedia device in the Media  
main menu.  
●
On the instrument panel screen you can  
view data from the Telephone mode.  
Configuration for sharing a con-  
nection over WLAN  
●
The instrument panel screen does not dis-  
play any indication to turn or the Media  
mode.  
Establishing the connection with the wire-  
less network (WLAN)  
WLAN access point  
●
With the multifunction steering wheel you  
●
can accept or reject incoming calls, as well  
as end an ongoing telephone conversation.  
Press the Settings button.  
Introduction  
●
Activate the wireless network. To do this,  
press the function button Wi-Fi > Infotain-  
ment system as hotspot.  
3 Not available for model: Media System  
Function buttons  
The infotainment system can be used to  
share a WLAN connection with up to 8 devi-  
Function buttons and their function:  
●
Activate the wireless network (WLAN) on the  
device that is to be connected. If necessary,  
refer to the manufacturer’s instruction man-  
ual.  
APP Return the Full Link main menu. Here you  
can end the MirrorLink® connection,  
connect another mobile phone device or  
select another technology.  
ces page 191, Configuration for sharing  
›››  
a connection over WLAN.  
The infotainment system can also use the  
WLAN hotspot of an external device to pro-  
vide Internet to the devices connected to the  
●
Activate the mobile device assignment in  
the infotainment system. To do this, press the  
function button Enable as hotspot and  
check the checkbox.  
Press to close the open apps. Then press  
the apps to be closed or the Close all  
function button to close all the open ap-  
plications.  
hotspot (WLAN client) page 192.  
›››  
●
Enter and confirm the network key dis-  
Note  
played on the device.  
Press to display the mobile phone device  
screen on the infotainment system  
screen.  
●
Data transmission may incur charges.  
Due to the high volume of data exchanged,  
SEAT recommends the use of a flat rate tar-  
iff for data transmission. Mobile phone op-  
The following adjustments can also be made  
in the Infotainment system as hotspot  
menu:  
To open the MirrorLink® settings.  
»
191  
Infotainment system  
●
●
●
Security level: WPA2 encryption automati-  
cally generates a network key.  
Press the WPS button on the WLAN router  
If necessary, enter the network key of the  
until the warning light on the router starts  
flashing. If the WLAN router does not support  
WPS the network must be configured man-  
ually.  
device in the infotainment system and con-  
firm with OK.  
●
Network key: Network key automatically  
generated. Press the function button to man-  
ually change the network key. The network  
key must have a minimum of 8 characters  
and a maximum of 63.  
Manual settings:  
●
To manually enter the network settings of  
●
OR: Press and hold the WLAN button on the  
an external (WLAN) device.  
WLAN router until the WLAN light on the router  
starts flashing.  
●
SSID: WLAN Network name (maximum of 32  
The wireless (WLAN) connection is establish-  
ed. To complete the connection, it may be  
necessary to enter other data into the device.  
●
characters).  
Press the WPS button on the WLAN device.  
The wireless (WLAN) connection is establish-  
ed.  
The wireless (WLAN) connection is establish-  
ed. To complete the connection, it may be  
necessary to enter other data into the device.  
Note  
Repeat this process to connect other devices.  
Due to the large number of devices on the  
market, it is not possible to guarantee fault-  
free operation of all functions.  
Repeat this process to connect other devices.  
There is also the option of scanning the QR  
code by connecting the device directly to the  
infotainment system’s Wi-Fi network without  
having to enter the password: select Settings  
> Wi-Fi > Quick connection to infotainment  
system.  
Configure Internet access  
The infotainment system can use the WLAN  
hotspot of an external device to establish an  
Internet connection.  
Establishing the connection with the wire-  
less network (WLAN)  
Wi-Fi Protected Setup (WPS)  
●
Activate and check the wireless hotspot on  
3 This depends on the equipment and the coun-  
try in question.  
the external device. If necessary, refer to the  
manufacturer’s instruction manual.  
●
Press the Settings button; OR access  
the Media and press the Settings menu.  
Wi-Fi Protected Setup can be used to create  
a ciphered local wireless network quickly and  
simply.  
●
Press the Wi-Fi > Connect to Wi-Fi menu  
and put a check in the checkbox.  
●
Establish the connection with the wireless  
network (WLAN).  
●
Press the Search for Wi-Fi button and se-  
lect the device you want from the list.  
192  

Related Topics

Infotainment system
Introduction First steps General instructions for use SEAT CONNECT Full Link WLAN access point Infotainment operation Voice control Radio mode Media Mode Navigation Telephone interface Multimedia

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot