Get Infotainment system -> Infotainment operation Guide for Seat Leon 4 Door Fourth Generation (2021-2026)

Infotainment operation

Requirements

Connect and disconnect the activation

word

Infotainment operation

●

Online and offline: voice control with the

corresponding infotainment installed in the

vehicle.

●

Press  Settings > Voice control > Acti-

vate/deactivate wake word.

Voice control

●

Online current active SEAT CONNECT Plus

Introduction

Activation word:

Hola Hola

contract.

Voice control works both online and offline. In

online mode, commands are recorded more

accurately, as more data is available.

Note

Commands

●

Voice control only recognises commands

in the language that is set in the infotain-

ment system.

For voice control to recognise commands re-

liably, bear in mind the following tips for the

commands to work properly:

Voice control understands questions and ex-

pressions without having to learn commands.

Commands can be formulated freely and

can be colloquial. You will find proposals for

commands in the infotainment system.

●

Test the voice control with the vehicle

stopped before starting to move to famili-

arise yourself with its operation.

●

Pronounce clearly. Confusing commands

are not recognised. Speak in a normal tone of

voice. Speak a little louder if you are driving

at high speed.

●

Additional information and examples can

be found in the menu  Help > Voice con-

Functions are reduced in offline mode.

●

Avoid outside noises. Open windows and

doors can interfere with voice control.

trol

Loud noises inside or outside the vehicle can

cause malfunctions, as well as confusing

phrases and answers.

●

Avoid other secondary noises, such as con-

versations in the vehicle. Do not direct the air

flow from the outlets towards the microphone

or the interior lining of the roof.

Activation word and commands

Languages available depending on the

market

Voice control activation words

●

Do not use a very strong accent or dialec-

tal.

If you have connected the voice control via

the wake word, the connected infotainment

responds with How can I help you?. It then

scans the words spoken in the vehicle after

the activation word.

Online and offline: German, American Eng-

lish, British English, French, Italian, Spanish

and Czech. These languages have advanced

functions such as Online Commands, air con-

ditioning control,natural interaction, etc.

●

Do not make long pauses.

Voice control is active and recognises the

words pronounced.



Voice control starts when the infotainment

recognises the activation word.

The other languages of the infotainment sys-

tem do not offer Online Commands, air con-

ditioning control or natural interaction.

Note

●

When the activation word is disconnec-

»

ted, the infotainment system cannot be

193

Infotainment system

Start voice control

Manually ending voice control

activated by means of the activation word.

Voice control is still available via the 

button on the multifunction steering wheel.

●

Voice control activation: say the word that

activates voice control.

Voice control can be cancelled with the Can-

cel command.

●

Availability depends on the country and

●

Multifunction steering wheel: press the

●

Multifunction steering wheel: press the

equipment.

voice control button .

voice control button  twice in a row, or a

long press.

●

Depending on the content of the phone

The voice control ends automatically, if you

use infotainment functions, if the parking sys-

tem is activated or by incoming calls.

book and to ensure reliable recognition of

the names of the phone book, it may be

useful to change the order of the first and

last name of the contact in question.

In some cases you can also start voice con-

trol of the connected mobile phone device,

by pressing and holding the voice control

button.

Start and stop voice control

Depending on the equipment, you can start

voice control in different ways.

194

Infotainment operation

Radio mode

Introduction

Fig. 156 Schematic representation: Radio view

●

In Radio mode you can tune in the available

radio stations in different frequency bands

and memorise your favourites on the preset

buttons to access them quickly.

Access the settings

You have a corresponding data package

acquired from the In-Car store or have a data

volume for your own mobile phone device via

Wi-Fi access point.

●

Press  > .

Online functions in Radio mode

The types of reception and frequency bands

available depend on the equipment and the

country. In certain countries, frequency

bands may stop broadcasting or not be

available again.

Online functions in Radio mode are only

available under the following conditions:

Note

●

For streaming services you need to have

an account with the provider in question.

●

SEAT CONNECT or SEAT CONNECT Plus

equipment.

●

Radio stations are responsible for the

content of the information they transmit.

Additional electrical equipment connected

to the vehicle can cause interference in the

reception of the radio signal and noise in

the speakers.

●

You have an active SEAT CONNECT user

account.

Access the RADIO menu

●

Press  >  Fig. 156.

Add the vehicle is assigned to your user ac-

count.

›››

»

195

Infotainment system

TP Next to the name of the station, monitor-

ing of active traffic information stations

(TP).



Show online radio stations whose pro-

gramme belongs to the desired musical

genre.

●

Foil or metal-coated stickers attached to

the windows may affect reception on vehi-

cles with a window aerial.

Symbols on the FM/DAB frequency band

Selecting, tuning and saving a sta-

tion



To display the frequency band for man-

ual selection of the FM frequency. Only

possible when the summary station list is

disconnected.

Radio equipment and symbols

The functions, as well as the types of recep-

tion and frequency bands available depend

on the equipment and the country.

Select the frequency band



DAB not available.

Before selecting a station you have to select

a frequency band or a type of reception. Dif-

ferent stations are available depending on

the frequency band selected or the type of

reception.



DAB stations support presentations (sli-

deshow).

●

AM tuner.

Dual FM receiver (diversity antenna).

Summarised FM station list.

Symbols on the AM frequency band

Fusion of DAB and FM stations into one list.

Fusion of all stations stored in preset but-

tons into one list. Maximum 36 favourite sta-

tions.

The types of reception and frequency bands

available depend on the equipment and the

country.





Manually updating the station list.

To display the frequency band for man-

ual selection of the AM frequency.

●

Select the frequency band or type of re-

ception: AM, FM/DAB, FM (for devices that do

not have DAB), Internet radio.

●

Station logos.

Menus in Internet radio mode

DAB presentation (slideshow). Images that

are emitted sequentially.



Show station selection.

Open text search.



Search and select a station

●

Internet radio.

Show the last online radio stations

heard.



You can select radio stations in different

ways. The options vary depending on the fre-

quency band and the type of reception.

Universal symbols in Radio mode

Show the 100 most played radio stations

and podcasts.



AM To select the desired AM frequency

band.

Show available online radio podcasts.

Select via the frequency band (AM and

FM)





FM/DAB To select the desired FM/DAB fre-

quency band.

Show online radio stations, grouped by

country.

●

Activate the frequency band.

Online radio To select the type of Internet

radio reception.



Show online radio stations by the de-

sired language.

196

Infotainment operation

●

Click on the cursor, scroll through the fre-

Select the category by which the stations

Press the preset button and keep it pressed

until the station is stored.

quency band and release it when you reach

the frequency band you want.

are to be filtered.

●

OR: press  to start the text search. The in-

put field is displayed.

OR: press the station on the station list and

●

OR: press on a point on the frequency

keep it pressed. The preset buttons are dis-

played.

band. The cursor will automatically jump to

the corresponding frequency.

●

Enter the name of the station you want. The

●

list of the stations found is updated while en-

tering the text.

Press the preset button.

The station of the set frequency is tuned.

The station is stored in the selected preset

button.

●

Press the station you want.

Select from the station list (AM and

FM/DAB)

The selected station is tuned.

If a station was already stored in the preset

button, it is overwritten with the new station.

The station list shows the stations that are

currently tunable. In the AM frequency band,

you may have to update the station list if you

are no longer in the area where you last ac-

cessed the station list. In the FM/DAB fre-

quency band, the station list is automatically

updated.

Search in SCAN mode (AM and FM/DAB)

In SCAN mode the stations are automatically

tuned in a sequential manner and each of

them is played for approx. 5 seconds.

Special functions in Radio mode

Traffic information (TP)

●

To start the SCAN mode press SCAN.

The TP function monitors the announcements

of a station with traffic information and auto-

matically reproduces them in the Radio mode

or in the multimedia playback that is active.

To do this, you have to be able to tune into a

station with traffic information.

SCAN mode starts and the station currently

tuned in is shown on the screen. Next to it is a

SCAN function button.

●

Open the station list

Press the station you want.

●

The selected station is tuned. In the case of

FM/DAB and if the station is available, the

best quality reception is automatically selec-

ted.

To select a station press SCAN.

Some stations without their own traffic infor-

mation support the TP function by broad-

casting traffic information from other stations

(EON).

SCAN mode stops and the station is tuned.

The SCAN function button is hidden.

Storing the station on the preset buttons

Search and filter stations (Internet radio)

You can store up to 36 stations of different

frequency bands and reception types as fa-

vourites using the preset buttons.

In the AM frequency band or in the Multime-

dia mode, a station with traffic information in

the background is automatically tuned while

it is possible to tune into a station with traffic

information.

In Online Radio mode, stations can be filtered

by categories and can be searched by text.

●

Open the station list.

●

Tune the station you want.

Access the preset buttons.

»

197

Infotainment system

If no station with traffic information can be

tuned in, the device automatically searches

for stations with tunable traffic information.

Online radio is only available through the In-

ternet connection of the active infotainment

system. The use of online radio can generate

expenses due to the transmission of data

from the Internet.

tivated, station logos are automatically as-

signed to the stations.

In the Online radio mode, the infotainment

system accesses the station logos of the on-

line database and automatically assigns

them to the stations

Stations with traffic information are not avail-

able in all countries.

●

In Online radio mode, press and set the au-

Activating and deactivating the TP func-

tion

dio quality to high or low to tune the online ra-

dio.

Assign station logos manually

●

In FM/DAB mode, press Station logos.

●

In Radio mode or Multimedia mode, press

Station logos

Press on the  icon and then select the

Settings > Traffic station (TP).

station to which a station logo is to be as-

signed.

In the case of some frequency bands, station

logos may already be pre-installed in the in-

fotainment system.

Online radio

●

Select the station logo. If desired, repeat

the same process with other stations.

Online radio is a type of reception for Internet

radio stations and podcasts that are inde-

pendent of AM, FM and DAB. Thanks to Inter-

net transmission, reception is not limited to

the region.

If in the FM/DAB frequency band settings the

automatic selection of station logos is ac-

●

OR, via the menu Settings > Station logos.

198

Infotainment operation

Media Mode

Introduction

Fig. 157 Schematic representation: Multimedia

view

●

In Media mode you can play multimedia files

from data media and streaming services

through the infotainment system.

Video files (depends on the system).

Limitations and indications of data media

Data media may not work if they have been

exposed to high temperatures or have been

damaged. Please bear in mind the manufac-

turer’s indications.

You can also use streaming services. The

availability of streaming services depends on

the equipment and the country.

Depending on the equipment, the following

data media can be used:

To use streaming services you need to have

your own user account in the streaming serv-

ice in question.

Quality differences between data media pro-

duced by different manufacturers can cause

multimedia playback malfunctions.

●

USB storage support (for example, a USB

stick, a mobile phone connected via USB).

●

Bluetooth® device (for example, a mobile

Access the MEDIA menu

Incorrect configuration on a data media may

cause the data media to be unreadable.

phone or a tablet).

●

Press  >  Fig. 157.

›››

Depending on the equipment, the following

types of multimedia files can be played:

Playlists only specify a playback order and

refer to the storage location of the multime-

dia files within the folder structure. In a

Access the settings

●

Press  > .

»

●

Audio files.

199

Infotainment system

playlist there are no multimedia files saved.

To play a playlist, multimedia files have to be

found in the storage places of the data media

to which the playlist refers.



To change to the previous title.

To change to the next title.

Repeat the current track.

Repeat all titles.

Playing audio and video files



You can search and play multimedia files

from an available multimedia source in differ-

ent ways.



















Note

To activate the shuffle playback order.

To display the favourites list.

Add multimedia file as favourite.

Top right: Select multimedia source.

Access the settings.

Search in the folder structure

SEAT assumes no liability for any deteriora-

tion or loss of files on data storage devices.

Multimedia files can be catalogued by cate-

gories (for example, album, artist, title). In My

media this category view is always dis-

played. The classic folder structure of individ-

ual USB data media is also found in My me-

dia.

Features of the multimedia equip-

ment and symbols

Open the search.

To return to the top folder of the multi-

media source.

1.

Activate the folder structure.

Audio, multimedia and connectivity:

The folder structure of the selected mul-

timedia source is displayed. When My

media is selected, the categories (mu-

sic, videos, playlists) and connected

multimedia sources are displayed first.

●

Multimedia playback and control via Blue-

tooth®.

Select and play a multimedia

source

●

Audio playback in these formats: AAC,

ALAC, AVI, FLAC, MP3, MP4, WMA.

●

Video playback in these formats: MPEG-1

2. Search for the title you want in the folder

structure.

Select multimedia source

and MPEG-2 (.mpg, .mpeg), ISO MPEG4, DivX

3, 4 and 5 Xvid (.avi), ISO MPEG4 H.264

(.mp4, .m4v, .mov), Windows Media Video 10

(.wmv, .asf).

Before playing multimedia files you must first

connect a multimedia source.

OR: press  to start the text search. The

input field is displayed.

To use streaming services you must be con-

nected to the Internet.

3. Enter the name of the desired title. The

list of the titles found is updated while

entering the text.

●

Playlists on any type of device.

Multimedia streaming (online).

Multimedia search.

●

Connect an external multimedia source.

Select the connected media source to be

4. Press the desired title.

used for playback.

If at the beginning of the playback your

selection is in a folder of a multimedia

source, the multimedia files that are in it

are also added to the playback.

Universal symbols in Media mode



To start playback.

To pause playback.



200

Infotainment operation

If a playlist is played, all available titles

in the playlist are added to the play-

back.

2. Select the streaming service you want.

dia file. If the music genre is not indicated in

the music files, for example, you cannot save

the music genre as favourite.

3. Follow the steps indicated by the info-

tainment system.

5. Close your selection with .

If a video file is playing, only that video can

be saved as favourite.

The streaming service is added to the list

of multimedia sources as a new function

button.

Select favourites

In favourites you can save titles, music gen-

res, artists and albums individually for play-

back.

Save favourites

Playing entertainment content in

the infotainment system

Only multimedia files in My media of the info-

tainment system can be saved as favourites.

You can save up to a maximum of 30 titles, al-

bums, artists and music genres individually as

favourites.

●

Access favourites .

Depending on the infotainment system, vid-

eos can be played.

Press the favourite you want.

Depending on your selection, all the titles be-

longing to the favourite are added to the

playback.

Video mode

1.

Start playback.

When in video mode, a video can be played

on the infotainment screen if this is stored on

a data media, in My media or is sourced from

a streaming service. In this case, the video

sound is played through the vehicle's speak-

ers.

2. Access favourites.

3. Tap a favourite that is not assigned.

Configure streaming services

OR: press on an existing favourite and

old for approx. 3 seconds.

Depending on the equipment you can use

streaming services directly through the info-

tainment system. For this you need to have a

premium user account of the streaming serv-

ice in question and you have to log in with it in

the infotainment system. You also need to be

connected to the Internet.

4. Select from the selection list: Title, Al-

bum, Artist, Music genres, Playlist.

The image is only displayed if the vehicle is

stopped. When the vehicle is in motion, the in-

fotainment screen turns off. The sound of the

video can still be heard.

The selection is saved instead of the previ-

ously selected favourite. If the favourite was

already assigned, the previously saved fa-

vourite is overwritten.

A stable Internet connection is required for

playback from a streaming service. In this

case, telephony costs may be generated.

1.

Select  Streaming as the multimedia

source.

The selectable options in the selection list

depend on the data attached to the multime-

A list of available streaming services is

displayed.

201

Infotainment system

Navigation

Introduction

Fig. 158 Schematic representation: Navigation

view

A global satellite system determines the cur-

rent position of the vehicle and the sensors

mounted on the vehicle analyse the routes

taken. All measured values and possible traf-

fic events are compared with the available

maps to allow optimal navigation to the des-

tination.

on the screen when travelling above a certain

speed. It is not a malfunction, but is due to

compliance with legislation.

If the exact destination cannot be reached

because, for example, it is in a non-digitised

area, indications relating to the address and

the distance to the destination are displayed

on the screen.

Navigation announcements

Navigation announcements are acoustic indi-

cations for driving referred to the current

route.

During dynamic route guidance, you will re-

ceive information about reported traffic con-

gestion on the route. An additional navigation

announcement is provided if the route is re-

calculated due to traffic congestion.

Navigation announcements and graphic rep-

resentations will guide you to your destina-

tion.

The type and frequency of navigation an-

nouncements depend on the driving situation,

for example, starting the guide to the destina-

tion, driving on the motorway or on a round-

about and the settings.

Navigation management is carried out on the

screen.

While a navigation announcement is playing,

its volume can be adjusted. The following

navigation announcements provided will be

played with the newly adjusted volume.

Depending on the country, some functions of

the infotainment system will not be available

202

Infotainment operation

Limitations during navigation

Zoom out the view (tip: use your index and

Rotate view (tip: use your index and middle

middle fingers).

fingers).

If the infotainment system cannot receive da-

ta from GPS satellites, for example, in a tunnel

or in an underground garage, navigation con-

tinues using the vehicle's sensors.

●

Press on the map with both fingers at the

same time and keep them pressed.

same time.

●

To rotate the map view, turn your fingers

Change view (tip: use your index finger).

clockwise anticlockwise.

In areas that are not digitised or are only par-

tially digitised on the infotainment memory,

the infotainment system will still attempt to

provide route guidance.

●

Press twice on the map and keep your fin-

ger pressed on the screen.

Saved data

●

To zoom out the view of the map, move your

The infotainment system saves certain data,

for example, frequent routes and position da-

ta, to make the entry of the destination more

agile and optimise the route guidance.

finger upwards. To zoom in the view of the

map, move your finger downwards.

In the case of missing or incomplete naviga-

tion data, it may not be possible to determine

the exact position of the vehicle. This may

mean that navigation is not as precise as usu-

al.

Change view (tip: use your index and middle

fingers).

Delete saved data

●

Press on the map with both fingers at the

same time and keep them pressed.

●

Press Settings > Basic function settings >

Roads and streets are subject to constant

change (e.g. new roads, road works, roads

closed to traffic, changes to street names

and building numbers). If the navigation data

is obsolete, this may lead to errors or inaccur-

acies during the route guidance.

Delete and then OK

●

To zoom out the view of the map, move one

finger towards the other. To zoom in the view

of the map, move one finger away from the

other.

WARNING

Select the settings, enter the destination

and the modifications for navigation only

with the vehicle at a standstill.

Tilt the view (tip: use your index and middle

fingers).

Managing the navigation map

Note

●

Press on the map with both fingers at the

To allow an optimal view, you can also man-

age the navigation map with additional finger

movements.

same time and horizontal to each other, keep

them pressed.

●

If a detour is passed during route guid-

ance, navigation may recalculate the

route.

●

To tilt the view of the map forward, move

●

The quality of the navigation recommen-

Move the map (tip: use your index finger).

your fingers upwards. To tilt the view of the

map backward, move your fingers down-

wards.

dations given by the Infotainment system

depends on the navigation data available

and any reported traffic congestions.

●

Move the map with your finger.

»

Zoom in the view (tip: use your index finger).

●

To increase the view in a certain position,

double-click on the map.

203

Infotainment system



Current position

Other symbols

●

Navigation announcements are not emit-

ted if the sound is muted in the infotainment

system.





Search for destinations.

Destinations along the route.

Final destination



Entering the detailed destination for an

address.











Search for destinations.

Frequent destinations.

Last destinations.

Favourite destinations

Back

















Home address

Navigation functions and symbols

Work address

Navigation

Favourite destinations

Navigation functions depend on the equip-

ment and country.

Additional window with more options.

Additional window with route options.

Centre the map on the current position.

Symbols in the route details

Functions



Current position.

●

Entering destination and route calculation

(offline and online).

Change view: 2D oriented to the north,

or 2D oriented to the direction of travel,

or 3D to the direction of travel.



Destination of the current guidance.

●

Displaying two navigation maps at the

same time (display and instrument cluster).

POI symbols (points of interest)

Information about the current route

guidance.

|

POIs (points of interest) are shown on the

map, provided the navigation has said data.

●

Update of online maps.

Predictive navigation.



Map scale.

Click on the desired POI (point of interest) to

start a route guidance page 205.

3D urban maps.

›››

Symbols in the additional window

Online traffic information

Dynamic POIs (points of interest)

●

To open the additional window, press .





Petrol station.

Parking lot.



Repeat the last navigation announce-

ment.

Symbols on the map



Tourist information offices.

Train station.



Volume of navigation announcements.





The buttons and indications depend on the

settings and the current driving situation.



Map lighting in Automatic, Day or Night

mode.

Restaurant.

Symbols for traffic events and points of inter-

est (POIs) are displayed on the map, for ex-

ample, petrol stations, train stations or inter-

esting stopovers, provided navigation has

Traffic information.



Offer new guidance routes.

POIs (points of interest) are shown on the

map, provided the navigation has said data

›››



360° electric range indicator (hybrid ve-

hicles)

such data page 207.

›››

page 207.

204

Infotainment operation

Click on a traffic event to open an additional

Using obsolete data may lead to errors dur-

ing navigation. Current routes cannot be

traced or the route guidances will lead to

mistaken destinations.

WARNING

window with further details page 207.

›››

If you update the navigation data manually

while driving, it may cause accidents with

serious injuries.

Slow traffic.

.

Traffic jam.

Ensure navigation data is updated at all

times.

●

Update the navigation data only with the



vehicle at a standstill.

Accident.



Online updating of navigation data

Broken down vehicle.

Note



The navigation data of the regions through

which you travel frequently is automatically

updated in the background if the Internet

connection is established and the privacy

settings are valid.

Automatic update of the navigation data is

subject to the privacy settings. In “Incogni-

to” mode, no update is carried out.

Slippery surface (ice or snow).



Road closed to traffic.



Slippery road hazard.



●

With the ignition switched on, the naviga-

Danger.

Start route guidance



tion data is updated automatically.

Road works.

Depending on the country and equipment,

different functions are available to enter des-

tinations.



Manual update of navigation data

Strong wind.



Current navigation data for large regions, for

example Western Europe, can be downloa-

ded from www.seat.com and stored on USB

data devices. Navigation through USB data

devices is not possible.

Reduced visibility.

The different functions for entering destina-

tions are found in the navigation main menu.



Opening the Navigation main menu

Navigation data

●

Press  Navigation.

●

Download the navigation data to a USB da-

ta device.

The Infotainment system is equipped with a

built-in navigation data memory. Depending

on the country, the necessary navigation da-

ta may already be pre-installed.

Select the destination and start naviga-

tion

●

Turn on the ignition of the vehicle.

Connect the USB data device to the info-

1.

Press .

tainment system. Navigation data is automat-

ically updated in the background.

To provide correct route guidance and make

the most of the functions offered, the infotain-

ment system should be updated on a regular

basis.

2. Select the desired destination. You can

chose from  Frequent destinations, 

Last destinations and  Favourite

destinations.

The map version is displayed in  Settings >

System information.

»

205

Infotainment system

 Favourite destinations

OR: press  and enter the address in

the input screen.

state of the data and it is not possible for all

positions.

Save up to 20 destinations as favourites.

OR: detailed address.

To start “offroad navigation”, press an empty

area without position data.

To save a destination as a favourite press 

in the split screen when entering the destina-

tion.

3. Press Start.

Start navigation

 Frequent destinations

●

Press .

Select the destination and start naviga-

tion

The destination synopsis uses recorded data

to propose possible destinations.

Move the view on the map until the desired

position can be selected. The navigation map

can be used by means of additional finger

movements page 203.

1.

Press  and then .

Select the destination and start naviga-

tion

2. Press the desired destination.

›››

3. Press Start.

1.

Press  and then .

●

Press the desired destination on the map.

2. Select the desired destination. The route

guidance starts automatically.

Press Route.

Note

Enter the destination as accurately as pos-

sible. If you enter a destination incorrectly,

the route guidance will not be able to start

or it will guide you to an incorrect destina-

tion.

Offroad navigation

Quick start: for a quick start, press and hold

the desired destination for a few seconds.

“Offroad navigation” calculates routes to se-

lected destination points using unknown da-

ta. When a destination point is outside the

known roads or position data, navigation

finds the route to the next point of the known

road and completes the path to the next des-

tination point with a direct connection.

 Last destinations

Navigation saves the last destinations to

make them available for a route guidance.

Start route guidance by selecting

from the map

Select the destination and start naviga-

tion

Start navigation

The navigation map includes active areas at

many points that are suitable for entering the

destination. To do this, press the desired posi-

tion or place on the map. If there is map data

at this point, you can start a route guidance.

1.

Press  and then .

●

Move the view on the map until the desired

2. Press the desired destination.

position can be selected. The navigation map

can be used by means of additional finger

movements page 203.

3. Press Start.

›››

Quick start: for a quick start, press and hold

the desired destination for a few seconds.

●

Press on any point on the map without posi-

tion data.

Whether it is possible to enter the destination

through the navigation map depends on the

●

Press Route.

206

Infotainment operation

With an active route guidance, traffic inci-

dents that are on the current route are shown

in the route details. Such traffic incidents can

Start route guidance using contact

details

Function descriptions

Route details

be avoided page 207.

›››

Start route guidance with the saved address

data of a contact. Contacts saved without

address data cannot be used for route guid-

ance.

The route details contain information on all

incidents, for example, the starting point,

stopovers, traffic events, POIs and destina-

tion, provided the navigation has such data.

Hazard information

Hazard information is shown on the naviga-

tion map with symbols in the same way as

traffic incidents. In this case, the source of this

information is another vehicle that has detec-

ted the hazard and has uploaded the infor-

mation to the service provider.

If you press on an incident, an additional win-

dow opens providing more options. The avail-

able options depend on the incident and the

current settings.

Start navigation

●

Press .

Press on the contact you want.

Press Route.

Open and close the route details

The hazards shown are: accident, broken

down vehicle and slippery road surface.

Note

●

To open, press or swipe it.

|

If the address details of a contact are ob-

solete, the route guidance will nevertheless

take you to the registered address. Check

that the contact address is updated.

●

To close, press or swipe it.

Traffic flow indication

|

The navigation map shows traffic flow ac-

cording to current traffic events, highlighting

the road network in colour.

Edit route guidance

To edit route guidance, move the stopovers to

the destination in the TripView view.

●

Orange: Slow traffic.

Red: Traffic jam.

Traffic information

●

Hold the desired destination pressed until it

is visibly highlighted.

The infotainment system receives detailed

traffic information automatically if the Inter-

net connection is established. This informa-

tion is shown with symbols and highlighting

the road network in colour on the map.

Note

●

Move the destination to the desired posi-

tion.

Traffic information receipt is subject to the

privacy settings. In maximum Privacy

mode, no traffic information is received.

Tracking or Location level setting is neces-

sary.

●

Remove your finger from the screen. The

route will recalculate.

Traffic incidents

Avoid traffic incidents

Traffic incidents, for example, traffic jams or

congested traffic, are shown on the naviga-

tion map using symbols.

The details of the route show the current traf-

fic incidents if the navigation has such data.

»

207

Infotainment system

Avoid traffic incidents by editing route details

ternative routes are available, provided navi-

gation has such data.

Functions in the additional window:

page 207.

›››

Stopping route Ends the current route guidance.

guidance

You can activate and deactivate the function

whenever you want.

●

Press on a traffic event.

Press on Avoid. The route will recalculate.

Close the additional window.



Enable and disable learning usage pattern

Add a destination to favourites.

Split screen



The setting is in the corresponding navigation

menu  > Basic function settings.

When handling navigation functions, an addi-

tional window with other options may open.

Possible options depend on the function be-

ing used.

Learn usage pattern

●

To activate the function, activate Learn us-

age pattern.

When the vehicle is in motion, navigation

saves routes and destinations used to auto-

matically generate destination proposals.

Destinations are learned based on the time of

day and the day of the week.

●

To disable the function, disable Learn us-

age pattern.

Close the additional screen

●

Press on an empty area outside the addi-

tional window.

●

To delete saved data, press Delete usage

Navigation can propose up to 5 routes at the

same time. The proposed routes may be dif-

ferent from the routes of the normal route

guidance.

pattern.

●

OR: press .

OR: press Accept.

360° electric operating range display

3 Valid for: hybrid vehicles

Functions in the additional window:

If one of the proposed destinations is selec-

ted, the guide to that destination is started.

The 360° operating range display shows the

possible range with the current charge level

of the high voltage battery.

Show on map

Show what is selected on the

map.

The route guidance follows the selected route

until the vehicle deviates from it. In that case,

the route is recalculated and takes you back

along the most direct path to the initially se-

lected destination.

Add stopover

Add a stopover to the route guid-

ance.

Switch on the 360° electric operating

range display

Direct route

Delete

Starts direct route guidance.

●

Open the additional map window and

press the symbol .

Delete a stopover from the route

guidance.

Important traffic jams are taken into account

in the route guidance, and are avoided if al-

Avoid

Avoid traffic jam. The route will re-

calculate.

208

Infotainment operation

Telephone interface

Introduction

Fig. 159 Schematic representation: Phone view

You can use the telephone interface to con-

nect your mobile to the infotainment system

and operate phone functions through it. The

sound is played through the vehicle's speak-

ers.

Telephone interface equipment and

symbols

Note

●

As a general rule, pairing a device (for ex-

ample, a mobile phone device) is only nec-

essary once. You can restore the device

connection via Bluetooth® or Wi-Fi with the

infotainment system whenever you want

without having to pair the device again.

Equipment features

●

Hands-free function.

You can connect up to two mobile phone de-

vices simultaneously to the infotainment sys-

tem.

Use up to two phones at the same time.

Phone book with up to 5,000 contacts, de-

pending on the infotainment system.

●

The availability of some telephone func-

tions will depend on the mobile phone con-

nected to the infotainment system.

High speeds, poor weather or road conditions

and a noisy ambience (even outside of the

vehicle), as well as the quality of reception

can all affect the quality of a telephone con-

versation in the vehicle.

●

SMS functions via Bluetooth®: SMS reading,

SMS writing (templates included), SMS play-

back, message history.

●

Email functions via Bluetooth®: reading

email, writing email.

»

209

Infotainment system

●

Connection to wireless charging option.

Connection to the microphone mounted on



Obtain information on the SEAT brand

and selected additional services related

to traffic and your travel.

Places with special regulations

Switch off the mobile telephone and the tele-

phone interface in places with a risk of explo-

sion. These places are not always clearly

marked. They include, for example:

the vehicle.



Voice mail.

Symbols in the main menu

Call list symbols











Contacts.

●

To open the call lists, press .

●

The vicinity of chemical pipelines and

tanks.

List of incoming and outgoing calls.

Enter telephone number.

Text messages (SMS and emails).

Telephone interface settings.











Incoming call.

●

The lower decks of boats and ferries.

Outgoing call.

In the proximity of vehicles that run on liq-

uefied gas (such as propane or butane).

Missed call.

Telephone number (company).

Telephone number (private).

Mobile telephone number (company).

●

Places where the air is laden with chemi-

cals or particles such as flour, dust or metal

powder.

Symbols for calls

The symbols may be different depending on

the infotainment system.





●

All other places where the vehicle engine or

telephone must be switched off.

Mobile telephone number (private).



Start a call or bringing it to the fore-

ground.





Fax (private).

Fax.

WARNING









End or reject a call.

Switch off the mobile phone in areas with a

risk of explosion!

Open contact list.

Symbols for text messages

Enter telephone number.

Mute the sound of the hands-free

Hold call.

The symbols may be different depending on

the infotainment system.

Note



In areas where special regulations apply or

the use of mobile phones is forbidden, it

must be switched off at all times. The radi-

ation produced by the mobile phone when

switched on may interfere with sensitive

technical and medical equipment, possibly

resulting in malfunction or damage to the

equipment.

●

To open the text messages, press .



Continue call.



Activate voice control input page 193.





Start conference call.

Pass call to private mode

Make an emergency call.

Get help in case of breakdown.

›››



Templates for text messages.





210

Infotainment operation

●

Optional: confirm the data transfer mes-

Connect a mobile phone device

Pair, connect and manage

sage on the mobile phone device.

Requirement: the mobile phone device is

paired with the infotainment system.

Requirement for pairing:

Active and passive connection

●

Bluetooth® is activated on the mobile

phone device.

To use the functions of the telephone inter-

face, there must be at least one mobile

phone device connected to the infotainment

system. If there are several mobile phone de-

vices connected to the infotainment system,

you can switch between active and passive

connections. To use the telephone interface

with the desired mobile phone device, estab-

lish the active connection with the infotain-

ment system.

phone device.

●

Bluetooth® is activated on the infotainment

system.

Establish an active connection

Requirement: several mobile phone devices

are connected to the infotainment system at

the same time.

●

Depending on the mobile device, it will be

necessary to have the Bluetooth® menu open

or activate the Visibility option so that the

device is visible from the infotainment system.

●

Select the desired mobile phone device

from the drop-down menu. All other mobile

phone devices are automatically in the pas-

sive connection.

Pair a mobile phone device suitable for tel-

ephony with the infotainment system to use

the telephone interface functions. On the first

connection, the mobile phone device is

Difference between connection types

The mobile phone device is paired and

connected. The functions of the tele-

phone interface are performed with the

data of said mobile phone device.

User profiles

paired with the infotainment system. Doing so

Primary

For each of the paired mobile phone devices

an individual user profile is automatically cre-

ated. In the user profile, data from the mobile

phone device is stored, for example, contact

details or settings. A maximum of four user

profiles can be saved in the infotainment sys-

tem at the same time.

saves a user profile page 211.

›››

The pairing can take a few minutes. The func-

tions available depend on the mobile phone

device used and its operating system.

The mobile phone device is paired and

Secon-

dary

connected. Calls can be managed but

the phone book, messages or other

functions will not be active.

Pair a mobile phone device

●

Open the list of available Bluetooth® devi-

Paired mobile phone devices are stored in the

infotainment system, even if they are not cur-

rently connected.

WARNING

ces on the mobile phone device and select

the name of the infotainment system.

If you perform the pairing while driving, it

could cause an accident or injury.

●

Please note and, if necessary, confirm the

messages that appear on the mobile phone

device and on the infotainment system. If the

pairing was successful, the phone data is

saved in the user profile.

●

Perform pairing only with the vehicle at a

»

standstill.

211

Infotainment system

●

The Comfort phone interface can be equip-

ped with the wireless charging function

OR: press a favourite in the telephone inter-

Note

face main menu to start the call.

●

In the pairing of some mobile phone devi-

page 213.

›››

ces, a PIN number is shown on the screen of

the mobile phone device. Enter that number

in the infotainment system to complete the

pairing.

 Calls

In order to use the functions of the wireless

charging function, you have to place a suita-

ble mobile phone device correctly in the stor-

age compartment. The mobile phone device

will then connect to the vehicle antenna. This

improves the reception and sound quality of

calls.

The telephone interface shows the call list of

the mobile telephone device. Start a call from

the call list.

●

While the infotainment system is in the

Known mobile phones menu, the wireless

charging function is disabled. When you

exit this menu, the wireless charging func-

tion is activated again.

●

Press  > All and press a number on the list

to start the call.

●

OR: press  and filter the call list entries

(for example, missed calls or dialled num-

bers). In filtered list, press a number to start

the call.

To call

Basic and Comfort Telephony

Open the telephone interface

 Dial

Depending on the equipment, two types of

telephone interface can be used:

●

Press  Telephone.

Manually enter a phone number to start a

call. While entering the phone number, con-

tacts that match that number are shown on

the infotainment screen.

Make a call

●

Basic telephone interface.

Select a phone number to start a call. Differ-

ent functions are available for selecting a

phone number:

Comfort telephone interface.

●

Press  and enter telephone number.

Press  to start the call

Basic telephone interface

The Basic telephone interface uses the Blue-

tooth® HFP profile for transmission. This inter-

face allows the use of telephone functions

through the infotainment system and play-

back through the vehicle's speakers.

 Contacts

The last call is dialled by pressing and hold-

ing the  button on the multifunction steering

wheel.

If a contact has several registered phone

numbers you have to select one.

●

Press  and press a number on the list to

start the call.

Comfort telephone interface

●

OR: press  and enter the contact name in

Send messages

Like the Basic telephone interface, the Com-

fort telephone interface also uses the Blue-

tooth® HFP profile.

the input field to search for it. Press on the

contact to start the call.

Depending on the mobile phone device and

the infotainment system used, you can send

212

Infotainment operation

and receive SMS and e-mails through the tel-

ephone interface.

Each time the phone is reconnected, the

phone book is updated.

Call a favourite

●

Press the assigned speed dial button.

If conference calls are supported, the phone

book can be accessed during a call. If there

is a saved image for a contact, it can be dis-

played in the list next to the entry.

Send an SMS

Note

●

Press  > Text message > Enter new

Favourites are not updated automatically.

If you change a contact's phone number,

you have to reassign the speed dial button.

message and enter the message on the

screen.

Favourites

●

Enter the contact you want in the search

bar.

A speed dial button can be assigned to a

phone book favourite up to a maximum of six.

If there is a registered photo saved to the

contact, it is shown on the speed dial button.

●

To send the message press OK.

Connectivity Box

Send an e-mail

●

All speed dial buttons have to be manually

edited and will be assigned to a user profile.

Press  > E-mail > Enter new message

and enter the message on the screen.

●

Enter the contact you want in the search

bar.

Assign the speed dial button

●

In the Favourites menu, press the  button,

●

To send the message press OK.

then open the phone book to select a con-

tact as a favourite. If the contact has several

phone numbers, press on the number in the

list.

Phone book, favourites and speed

dial buttons

Fig. 160 In the centre console: pad for the mo-

bile phone connection.

Edit the speed dial button

In the first connection of a telephone with the

infotainment system, the phone book is saved

in the infotainment system. It may be neces-

sary to confirm the data transmission on the

mobile phone.

The Connectivity Box includes different func-

tions that will help to use your mobile device.

These are:

●

To edit or delete a favourite contact press

on the icon  in the Favourites menu screen.

You can delete one or more favourites.

1)

●

»

Wireless Charger .

1)

It only includes the wireless charge functionali-

ty.

213

Infotainment system

●

Signal amplifier / (Mobile Signal Amplifier)

To establish a connection with the vehicle's

external aerial:

circumstances, the infotainment system in-

dicates that there is a foreign object in the

storage compartment. Using a suitable mo-

bile phone device and correcting its posi-

tion can eliminate the fault.

(Wireless Charger)

●

Place your mobile device in the middle of

the pad with the screen facing up Fig. 160

The Wireless Charger allows mobile devices

with Qi¹⁾technology to be charged without a

cable.

›››

.

›››

●

If necessary, remove any objects that

may obstruct the cover's closing function.

Make sure there are no objects between the

pad and the mobile phone.

To charge your mobile phone wirelessly:

●

Place your mobile device in the middle of

the pad with the screen facing up Fig. 160

WARNING

Your mobile phone will automatically be

ready to make use of the external aerial.

›››

●

The mobile phone may heat up due to the

wireless charging. Think about this before

.

›››

WARNING

you pick it up, and take care when removing

it.

Make sure there are no objects between the

pad and the mobile phone.

Notifications on the screen of the mobile

phone device can distract the driver’s at-

tention and increase the risk of a serious

accident.

●

There must be no metallic or other ob-

The mobile phone will start charging auto-

matically. For further information about

whether your mobile device uses Qi technol-

ogy, check your phone's user manual or visit

the SEAT website.

jects between the mobile phone and the

housing, to prevent the functionality of the

Connectivity Box from being affected.

●

Place only one suitable mobile phone de-

vice, Qi compatible if applicable. For cor-

rect operation, remove the protective case

and ensure that it has maximum dimen-

sions (width x length) of 80 mm x 140 mm

(3.15 x 5.512 inches). Place on the

Connectivity Box base as per the indica-

tions.

Note

●

Your mobile device must support the Qi

Signal amplifier / (Mobile Signal Amplifier)

inductive charging interface standard for

proper operation.

It allows you to reduce radiation in the vehicle

and have better reception.

●

The charging time and the temperature

For safety reasons, it is recommended that

you pair the system and the mobile using

Bluetooth^®and place it on the Connectivity

Box pad, for the best reception without hav-

ing to handle the mobile phone.

vary in accordance with the device used.

●

If the mobile phone device is not placed

●

The maximum charging capacity is 5 W.

Qi technology does not allow you to

on the base of the Connectivity Box in the

correct position, or if it is larger than the

detailed dimensions, it may not be recog-

nised or charge correctly. Under certain

charge more than one mobile device simul-

taneously.

1)

Qi technology allows you to charge your mo-

bile phone wirelessly.

214

Infotainment operation

●

No improvement in reception can be

guaranteed if there is more than one mo-

bile phone on the pad.

●

You are advised to keep the engine run-

ning to guarantee proper wireless charg-

ing.

●

When a telephone with Qi technology is

connected by USB, it will be charged by the

means specified by the manufacturer.

Fig. 162 Rear part of the centre console: USB

connectors with power outlet function.

Multimedia

The USB port can be found in the storage

compartment area of the front centre con-

USB port

sole Fig. 161.

›››

Depending on the equipment and the coun-

try, the vehicle may also have USB connec-

tions exclusively for charging or as a power

socket.

These USB ports are located at the rear of

the console, between the front seats

Fig. 162.

›››

Fig. 161 Centre console: USB port.

215

Infotainment system -> Infotainment operation for Your Seat Leon 4 Door Fourth Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals