134 Wheels › Wheel bolt cover caps
Continue driving, exercising appropriate caution,
and seek the help of a specialist garage.
›
Storage space and interior
equipment
Equipment in the boot
Overview
Wheel bolt cover caps
Pull off and install cover caps
A
Removable partition of the storage compart-
ment
Max. load 2.5 kg
Pull off
Push the pull-off clamp onto the cover cap up to
the stop.
›
B
Fixed storage compartment
Max. load 1.5 kg
Pull off the cover cap.
›
Install
C
Under the floor covering: Storage compartment
for spare or emergency wheel and vehicle tools
Push the cover cap onto the wheel bolt to the stop.
›
Load on floor covering max. 75 kg
Full wheel frame
Pull off panel and install
Emergency equipment
Applies to factory installed covers or covers deliv-
ered with ŠKODA original accessories.
Overview of the emergency equipment
Emergency equipment in the luggage compart-
ment
Remove
Hang the bracket for pulling off the wheel covers
at the edge of one of the openings in the cover.
›
Push the wheel wrench through the bracket, sup-
port it on the tire and pull off the cover.
›
Install
Place the cover on the intended valve section on
the rim.
›
If an anti-theft wheel bolt is used, it must be in the
position marked on the cover.
Press the trim, starting at the valve, into the rim on
both sides until it engages around the entire cir-
cumference.
›
A
Positioning of the first aid kit (depending on
equipment)
B
Tool kit
NOTICE
Use hand pressure, do not hit the wheel cover.
▶
C
Positioning of the warning triangle (depending
on equipment)
Storage compartment for the reflective vest
The storage compartment for the reflective vest is in
the storage compartment of the front door.
English 
