Fuses and light bulbs 259
Fuse cover in engine compartment
Fuse assignment in engine compartment
The fuse box in the engine compartment exists in two different
versions. You can determine which version your vehicle is fitted with
after removing the fuse cover at the location of the fuses.
Fig. 239 Schematic repre-
sentation of fuse carrier in
engine compartment
Certain electrical components are only standard on certain vehicle model versions
or only suppliable as optional equipment for certain models.
Fig. 238 Fuse cover in engine
compartment
No. Power consumer
Amperes
On some vehicles, the battery cover must be removed before removing
the fuse cover ⇒ page 232.
F1 Not assigned
F2 Control unit for automatic gearbox DQ 200
F3 Measuring circuit
30
5
Removing fuse cover
A
–
Move the circlips A ⇒ fig. 238 as far as the stop, the symbol
F4 Valves for ABS
30/20
15
appears behind the circlip and remove the cover.
F5 Control unit for automatic gearbox
Installing fuse cover
Instrument cluster, windshield wiper lever and turn sig-
nal light lever
5
F6
A
–
Position the fuse cover on the fuse box and push the circlips Aas far
as the stop - the symbol is visible behind the circlip.
F7 Power suppy terminal 15, Starter
F8 Radio
40
15
5
Caution
F9 Phone
•
When unlocking and locking the fuse cover, it must be pressed on the sides to
the box, otherwise damage can occur to the locking mechanism.
F10 Engine control unit, Main relay
F11 Control unit for auxiliary heating
F12 Control unit for CAN databus
5/10
20
5
•
Carefully position the fuse cover in the engine compartment. If the cover was
not correctly positioned, water can get into the fuses and this results in a damage
to the vehicle!
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
English 
