2009-2013 Skoda Yeti 4 Door Using the system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Using the system for Your Skoda Yeti 4 Door First Generation (2009-2013)

7
Using the system  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
8
Cockpit  
Fig. 1 Certain items of equipment shown in the illustration are only fitted to particular model versions or are optional items of equipment.  
Cockpit  
9
Cockpit  
16  
A Switch for the front passenger airbag (in front passenger storage  
Overview  
compartment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
167  
This overview will help you to quickly familiarise yourself with the  
displays and the control elements.  
17  
14  
252  
58  
A Electric power-operated window* . . . . . . . . . . . . . . . . . . . . . . . . . . .  
18  
A Fuse box (on side of dash panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
19  
A Light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
1
A Electric exterior mirror adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . .  
73  
20  
218  
A Bonnet release lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
2
106  
A Air outlet vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
21  
A Control dial for the instrument lighting and control dial for the head-  
3
A Lever for the multi-functional switch:  
light beam range regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
63, 63  
11  
Turn signal light, headlight and parking light, headlight flasher  
64  
22  
A Lever for adjusting the steering wheel . . . . . . . . . . . . . . . . . . . . . . .  
Cruise control system* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
130  
23  
A Driver's knee airbag* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
162  
121  
4
A Steering wheel:  
24  
A Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
with horn  
25  
A Depending on equipment fitted:  
with driver airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
159  
Switch for the ESP* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
177  
179  
125  
46  
with pushbuttons for radio, navigation system and mobile  
phone* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Switch for TCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
133  
17  
26  
A Front and rear parking aid* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
5
A Instrument cluster: Instruments and indicator lights . . . . . . . . . . .  
27  
A Central locking switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6
A Lever for the multi-functional switch:  
28  
A Gearshift lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
123  
101  
185  
183  
127  
Multi-functional indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
21  
69  
29  
A Storage compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Windshield wiper and wash system . . . . . . . . . . . . . . . . . . . . . . .  
30  
A Offroad* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
106  
84  
A Air outlet vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
31  
A Tyre inflation pressure-control system* . . . . . . . . . . . . . . . . . . . . . .  
8
A Control dial for heating on the driver's seat* . . . . . . . . . . . . . . . . . .  
32  
A Park Assist* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
9
A Switch for hazard warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
64  
33  
A Depending on equipment fitted:  
10  
167  
100  
A Indicator light for a switched off front seat passenger airbag . . .  
Operating controls for the heating . . . . . . . . . . . . . . . . . . . . . . . .  
Operating controls for Climatic* . . . . . . . . . . . . . . . . . . . . . . . . . .  
Operating controls for Climatronic* . . . . . . . . . . . . . . . . . . . . . . .  
107  
109  
113  
11  
A Storage compartment on the dash panel* . . . . . . . . . . . . . . . . . . . .  
12  
A Depending on equipment fitted:  
Radio*  
Navigation*  
Note  
13  
A Control dial for heating on the front passenger seat* . . . . . . . . . .  
84  
99  
Equipment which is marked * is only standard on certain vehicle model  
versions or only suppliable as optional equipment for certain models.  
14  
A Storage compartment on the front passenger side . . . . . . . . . . . .  
15  
159  
A Front passenger airbag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
10 Cockpit  
Cars with factory-fitted radio or navigation system are supplied with separate  
instructions for operating such equipment.  
The arrangement of the controls and switches on right-hand drive models may  
differ to some extent from that shown on page 8, fig. 1. The symbols on the  
controls and switches are the same as for left-hand drive models.  
The brief instruction 11  
The brief instruction  
Setting steering wheel position  
Basic functions and important information  
Introduction  
The chapter of the brief instruction is only used as a quick reference  
of the most important operating elements of the vehicle. It is neces-  
sary to observe all the information which is contained in the  
following chapters of the Owner's Manual.  
Fig. 3 Adjustable steering  
wheel: Lever on the steering  
column  
Unlocking and locking the vehicle  
Fig. 4 The correct distance of  
the driver from the steering  
wheel  
Fig. 2 Remote control key  
1
A Unlocking the vehicle  
You can set the height and the forward/back position of the steering wheel to the  
desired position.  
2
A Unlocking the boot lid  
3
A Locking the vehicle  
Further information page 120, “Setting steering wheel position”.  
4
A Folding out/folding up of the key  
Further information page 49, “Unlocking and locking car”.  
WARNING  
Adjust the steering wheel so that the distance between the steering  
wheel and your chest is at least 25 cm fig. 4. Not maintaining this  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
12 The brief instruction  
Adjusting the front seats  
WARNING (continued)  
minimum distance will mean that the airbag system will not be able to prop-  
erly protect you - hazard!  
You must not adjust the steering wheel when the vehicle is moving!  
For safety reasons the lever must always be firmly pushed up to avoid the  
steering wheel altering its position unintentionally when driving - risk of  
accident!  
Seat belt height adjuster  
Fig. 6 Controls at seat  
1
A Adjusting a seat in a forward/back direction  
2
A Adjusting height of seat  
3
A Adjust the angle of the seat backrest  
4
A Adjusting lumbar support*  
Further information page 75, “Adjusting the front seats”.  
Fig. 5 Front seat: Seat belt  
height adjuster  
WARNING  
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Move the height adjuster in the desired direction up or down fig. 5.  
Then pull firmly on the belt to ensure that the seat belt height adjuster  
has correctly locked in place.  
Further information page 155, “Seat belt height adjuster”.  
WARNING  
Adjust the height of the belt in such a way that the shoulder part of the belt  
is positioned approximately across the middle of your shoulder - on no  
account across your neck!  
The brief instruction 13  
Electric exterior mirror adjustment*  
Switching lights on and off  
Fig. 7 Inner part of door:  
Rotary knob  
Fig. 8 Dash panel: Light  
switch  
Heating of the external mirror*  
Automatic light control*  
  
Adjusting left and right exterior mirrors simultaneously  
Adjusting the right-hand exterior mirror  
Switching off operating control  
Switching off all lights/daylight driving lights  
Switching on side lights  
Switching on the low beam and main beam  
Fog lights*  
Further information page 73, “Exterior mirror”.  
Rear fog light  
Further information page 58, “Switching lights on and off ”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
14 The brief instruction  
A
A Intermittent switch, sensitivity setting rain sensor*  
Turn signal and main beam lever  
0
A Wipers off  
1
A Intermittent wipe  
2
A Slow wipe  
3
A Fast wipe  
4
A one time wipe  
5
A Automatic wipe/wash  
Rear window wiper  
Fig. 9 Turn signal and main  
beam lever  
6
A Intermittent wipe - every 6 seconds  
7
A Automatic wipe/wash  
Further information page 69, “Windshield wiper”.  
A
A Turn signal light right  
B
A Turn signal light left  
Power windows*  
C
A Switching over between low beam and main beam lights  
D
A Headlight flasher  
Further information page 64, “The turn signal   and main beam lever ”.  
Windscreen wiper lever  
Fig. 11 Buttons on the  
driver's door  
A
A Button for the power window in the driver's door  
B
A Button for the power window in the front passenger's door  
Fig. 10 Windscreen wiper  
lever  
C
A Button for the power window in the rear door on the right*  
D
A Button for the power window in the rear door on the left*  
The brief instruction 15  
S
A Safety pushbutton*  
Unscrew the fuel filler cap anti-clockwise and place the fuel filler cap  
from above on the fuel filler flap fig. 13.  
Further information page 52, “Power windows*”.  
Further information page 216, “Refuelling”.  
Refuelling  
Bonnet remote release  
Fig. 12 Right rear side of the  
vehicle: Fuel filler flap  
Fig. 14 Bonnet release lever  
Pull the unlocking lever below the dash panel on the driver's side  
fig. 14.  
Opening the bonnet  
Fig. 13 Fuel filler flap with  
cap unscrewed  
Press onto the left side of the fuel filler flap fig. 12.  
The fuel filler cap on the fuel filler tube must be unlocked to the left  
using the vehicle key (only valid for vehicles which do not have auto-  
matic unlocking of the fuel filler flap).  
Fig. 15 Radiator grille:  
Locking lever  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
16 The brief instruction  
C
A Engine oil must be refilled.  
Further information page 221, “Check engine oil level”.  
Fig. 16 Securing the bonnet  
with the bonnet support  
Pulling on the locking lever page 15, fig. 15 will unlock the bonnet  
fully.  
Take the bonnet support out of its holder and set it in the opening  
designed for it fig. 16.  
Further information page 218, “Opening and closing the bonnet.”.  
Inspecting the engine oil level  
Fig. 17 Dipstick  
A
A Engine oil must not be refilled.  
B
A Engine oil can be refilled.  
Instruments and Indicator/Warning Lights 17  
Instruments and Indicator/Warning Lights  
General view of the instrument cluster  
Fig. 18 Instrument cluster  
1
A Engine revolutions counter page 18  
with Service Interval Display page 20  
2
A Speedometer page 18  
with digital clock page 21  
3
A Button for display mode:  
with Multi-functional indicator* page 21  
with Information display* page 26  
Set hours / minutes  
Activating / deactivating the second speed in mph or km/h*  
Service interval - Display of the remaining number of days or miles to the  
next Inspection Service / Reset*  
6
A Fuel gauge page 18  
A Button for:  
7
1)  
Reset trip counter for distance driven  
4
A Coolant temperature gauge page 18  
Resetting Service Interval Display  
Set hours / minutes  
5
A Display  
with counter for distance driven page 19  
Activate / deactivate display mode  
1)  
Valid for countries where the values are indicated in British measuring units.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
18 Instruments and Indicator/Warning Lights  
Cold range  
Engine revolutions counter  
If the pointer is in the left-hand area of the scale it means that the engine has not  
yet reached its operating temperature. Avoid running at high engine speeds, at full  
throttle and at severe engine loads.  
1
The red zone of the rev counter scale A page 17, fig. 18 indicates the range in  
which the engine control unit begins to limit the engine speed. The engine control  
unit restricts the engine speed to a steady limit value.  
The operating range  
Before reaching the red zone of the rev counter scale, shift up into the next higher  
gear.  
The engine has reached its operating temperature as soon as the pointer moves  
into the mid-range of the scale. The pointer may also move further to the right at  
high engine loads and high outside temperatures. This is not critical provided the  
warning symbol in the instrument cluster does not flash.  
Avoid high engine speeds during the driving time and before the engine has been  
warmed up to operating temperature page 187.  
If the symbol in the instrument cluster flashes it means that either the coolant  
temperature is too high or the coolant level is too low. Observe the guidelines  
page 37, “Coolant temperature/ Coolant quantity ”.  
For the sake of the environment  
Shifting up early helps you save fuel and reduce the operating noise of your  
vehicle.  
WARNING  
Pay attention to the warning notes page 219, “Working in the engine  
compartment” before opening the bonnet and inspecting the coolant level.  
Speedometer  
Warning against excessive speeds*  
Caution  
An acoustic warning signal will sound when the vehicle speed exceeds 120 kilome-  
tres per hour. The acoustic warning signal will switch off again when the vehicle  
speed goes below this speed limit.  
Additional headlights and other attached components in front of the fresh air inlet  
impair the cooling efficiency of the coolant. There is then a risk of the engine over-  
heating at high outside temperatures and high engine loads!  
Note  
This function is only valid for some countries.  
Fuel gauge  
6
The fuel gauge A page 17, fig. 18 only operates when the ignition is switched  
on.  
Coolant temperature gauge  
The fuel tank has a capacity of about 60 litres. The warning symbol in the instru-  
ment cluster lights up when the pointer reaches the reserve marking. There are now  
about 10.5 litres of fuel remaining in the tank. This symbol is a reminder for you,  
that you must refuel.  
4
The coolant temperature gauge Apage 17, fig. 18 operates only when the igni-  
tion is switched on.  
In order to avoid any damage to the engine, please pay attention to the following  
notes regarding the temperature ranges:  
Instruments and Indicator/Warning Lights 19  
The following will be displayed in the information display*:  
Please refuel!  
Reset button  
7
If you hold the reset button A page 17, fig. 18 pressed for about 1 second, the  
trip counter is set back to zero.  
An audible signal sounds as an additional warning signal.  
Trip counter for distance driven  
The trip counter indicates the distance which you have driven fig. 19 since this  
counter was last reset - in steps of 100 metres or 1/10 of a mile.  
Caution  
Never run the fuel tank completely empty! The irregular supply of the fuel system  
can lead to irregular running of the engine. Unburnt fuel may get into the exhaust  
system and damage the catalytic converter.  
Counter for distance driven  
The counter for distance driven fig. 19 indicates the total distance in kilometers  
or miles which the vehicle has driven.  
Note  
Fault display  
After filling up, it can occur that during dynamic driving (e.g. numerous curves,  
braking, driving downhill and climbing a steep hill) the fuel gauge indicates approx.  
a fraction less. When stopping or during less dynamic driving, the correct fuel  
supply quantity is indicated. This effect is not a fault.  
If there is a fault in the instrument cluster, a constant text will appear in the display  
Error. Have the fault rectified as soon as possible by a specialist workshop.  
WARNING  
Never seek to adjust the trip counter for distance driven while driving for  
safety reasons!  
Counter for distance driven  
Note  
If vehicles which are fitted with the information display* the display of the second  
speed is activated in mph or km/h, this driving speed is indicated instead of the  
counter for the total distance driven.  
Fig. 19 Display: Counter for  
distance driven  
The distance which you have driven with your vehicle is shown in kilometres (km).  
In some countries the measuring unit “mile” is used.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
20 Instruments and Indicator/Warning Lights  
A key symbol and a display regarding the remaining kilometers appear for 10  
second in the display. At the same time, a display appears regarding the remaining  
days until the next service interval.  
Service Interval Display  
On vehicles which are equipped with information display*, you can call up this  
information in the following menu on page 27:  
„
„
„
SETUP (Settings)  
Service Interval (Service)  
Info  
The following will be displayed in the information display* for 10 seconds:  
Service in ... km or... days  
Fig. 20 Service Interval  
Display: Note  
Resetting Service Interval Display  
It is only possible to reset the Service Interval Display, if a service message or at least  
a pre-warning is shown on the display of the instrument cluster.  
Depending on the equipment installed in the vehicle, the text can differ on the  
display.  
We recommend having this resetting performed by a specialist garage.  
The specialist garage:  
Service Interval Display  
Before the next service interval a key symbol and the remaining kilometers are  
indicated after switching on the ignition fig. 20. At the same time, a display  
appears regarding the remaining days until the next service interval.  
resets the memory of the display after the appropriate inspection;  
makes an entry in the Service schedule;  
affix the sticker with the entry of the following service interval to the side of the  
dash panel on the driver's side.  
The following will be displayed in the information display*:  
Service in ... km or... days  
7
Reset the service interval displays by using the reset button A page 17 on the  
The kilometre indicator or the days indicator reduces in steps of 100 km. or days  
until the service due date is reached.  
trip counter.  
On vehicles which are equipped with information display*, you can call up this  
information in the following menu on page 27:  
A flashing key symbol and the text Service appears in the display for 20 seconds  
as soon as the due date for the service is reached.  
„
„
„
SETTINGS (SETTINGS)  
Service Interval (Service)  
Reset  
The following will be displayed in the information display*:  
Service now!  
Display regarding the distance and days until the following service interval  
3
You can use the button A to display the remaining distance driven and the days  
until the next service interval page 17.  
Instruments and Indicator/Warning Lights 21  
Caution  
WARNING  
We recommend that you do not reset the Service Interval Display yourself other-  
wise this can result in the service interval display being incorrectly set, which may  
also result in problems with operation of your vehicle.  
The clock should not be adjusted while driving for safety reasons but only  
when the vehicle is stationary!  
Multi-functional indicator (onboard computer)  
Note  
Never reset the display between service intervals otherwise this may result in  
incorrect readouts.  
information is retained in the Service Interval Display also after the battery of  
the vehicle is disconnected.  
If the instrument cluster is exchanged after a repair, the correct values must be  
Introduction  
The multi-functional indicator appears in the display page 22, fig. 21 or in the  
information display page 26 depending on the equipment fitted to your vehicle.  
The multi-functional indicator offers you a range of useful information.  
entered in the counter for the Service Interval Display. This work is carried out by a  
specialist garage.  
The outside temperature  
Driving time  
page 24  
page 24  
page 24  
page 24  
page 25  
page 25  
page 25  
page 25  
page 25  
The data displayed is the same after resetting the display with flexible service  
intervals (QG1) using the reset button as that for a vehicle with fixed service inter-  
vals (QG2). We therefore recommend having the Service Interval Display reset only  
by a specialist garage which is familiar with the procedure for resetting the display  
with a vehicle system tester.  
Current fuel consumption  
Average fuel consumption  
Range  
Please refer to the brochure Service schedule for extensive information about  
the service intervals.  
Distance driven  
Average speed  
Digital clock  
Current speed*  
Warning against excessive speeds*  
3
7
The time is set with the buttons A and A page 17, fig. 18.  
On vehicles which are fitted out with information display*, it is possible to switch  
off the display of some information.  
3
Select the display which you wish to change with the button A and carry out the  
change with the button A.  
7
On vehicles which are fitted out with the information display*, it is possible to set  
the time in the menu Time page 30.  
Caution  
Pull out the ignition key while having contact with the display (for example when  
cleaning) in order to prevent any damage.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
22 Instruments and Indicator/Warning Lights  
Note  
switching off the ignition. The memory will be is automatically erased, on the other  
hand, if the trip is interrupted for more than 2 hours.  
In certain national versions the displays appear in the Imperial system of meas-  
ures.  
Total-trip memory (memory 2)  
The total distance driven memory gathers data from any number of individual jour-  
neys up to a total of 99 hours and 59 minutes driving or 9.999 kilometres driven.  
The memory is deleted when either of these limits is reached and the calculation  
starts from anew.  
If the display of the second speed is activated in mph, the current speed* is not  
indicated in km/h on the display.  
Memory  
The total-trip memory will not, contrary to the single-trip memory, be deleted after  
a period of interruption of driving of 2 hours.  
Note  
All information in the memory 1 and 2 is erased if the battery of the vehicle is  
disconnected.  
Operating with the buttons on the windshield wiper lever  
Fig. 21 Multi-functional  
indicator  
The multi-functional indicator is equipped with two automatic memories. The  
selected memory is displayed in the middle of the display field fig. 21.  
The data of the single-trip memory (memory 1) is shown if a 1 appears in the  
display. A 2 shown in the display means that data relates to the total distance  
memory (memory 2).  
Fig. 22 Multi-functional  
indicator: Control elements  
B
Switching over the memory with the help of the button A fig. 22 on the wind-  
D
screen wiper lever or with the help of the button A on the multifunction steering  
wheel* page 23.  
A
B
The rocker switch A and the button A are located in the grip of the  
Single-trip memory (memory 1)  
window wiper lever fig. 22.  
The single-trip memory collates the driving information from the moment the igni-  
tion is switched on until it is switched off. New data will also flow into the calcula-  
tion of the current driving information if the trip is continued within 2 hours after  
Instruments and Indicator/Warning Lights 23  
Selecting the memory  
Short-term pressing of the button A allows to select the desired  
memory.  
Operating with the buttons on the multifunction steering wheel*  
B
Selecting the functions  
Press the top or bottom rocker switch Afor longer than 0.5 seconds.  
A
In this way, call up in sequence the individual functions of the multi-  
functional indicator.  
Fig. 23 Multi-functional  
indicator: Operating with the  
buttons on the multifunction  
steering wheel  
Setting function to zero  
Select the memory you want.  
B
Press button A for more than 1 second.  
D
Switching over and resetting is performed with the handwheel A  
B
The following readouts of the selected memory will be set to zero by button A:  
fig. 23.  
average fuel consumption,  
distance driven,  
Selecting the memory  
D
Short-term pressing of the button A allows to select the desired  
memory.  
average speed,  
Driving time.  
You can only operate the multi-functional indicator when the ignition is switched  
on. After the ignition is switched on, the function displayed is the one which you last  
selected before switching off the ignition.  
Selecting the functions  
C
By pressing the button A, you can call up the menu of the multi-func-  
tional indicator.  
A
B
On vehicles fitted with the multifunction steering wheel*, the buttons A and A  
have been replaced with the rotary control on the multifunction steering wheel  
fig. 23.  
D
Turn the handwheel Aupwards or downwards. In this way, call up in  
sequence the individual functions of the multi-functional indicator.  
D
Short-term pressing of the button A allows to select the highlighted  
function.  
Setting function to zero  
Select the memory you want.  
D
Press the button A for more than 1 second.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
24 Instruments and Indicator/Warning Lights  
The following readouts of the selected memory will be set to zero with the button  
D
A:  
WARNING  
Do not only rely upon the information given on the outside temperature  
display that there is no ice on the road. Please note that black ice may also be  
present on the road surface even at temperatures around +4 °C - warning,  
drive with care!  
average fuel consumption,  
distance driven,  
average speed,  
Driving time.  
You can only operate the multi-functional indicator when the ignition is switched  
on. After the ignition is switched on, the function displayed is the one which you last  
selected before switching off the ignition.  
Driving time  
The driving time which has elapsed since the memory was last erased, appears in  
the display. If you wish to measure the driving time as of a particular time, you must  
B
set the memory to zero at this moment in time by pressing the button A on the  
Outside temperature  
D
windshield wiper lever page 22, fig. 22 or the handwheel A on the multifunc-  
tion steering wheel* page 23, fig. 23 for longer than 1 second.  
The maximum distance indicated in both memories is 99 hours and 59 minutes.  
The indicator is set back to null if this period is exceeded.  
Current consumption  
The current fuel consumption level is shown in the display in litres/100 km. This  
information can help you to adapt your style of driving to the fuel consumption you  
wish to achieve.  
Fig. 24 The outside tempera-  
ture  
The display appears in litres/hour if the vehicle is stationary or driving at a low  
speed.  
The outside temperature appears in the display when the ignition is switched on.  
The indicated value will be updated every 0,5 seconds while you are driving.  
If the outside temperature drops below +4°C, a snow flake symbol (warning signal  
for ice on the road) appears in front of the temperature indicator and flashes for 10  
seconds, then remains displayed together with the outside temperature fig. 24.  
Average fuel consumption  
A
At the same time an audible signal sounds. After pressing the rocker switch A at  
C
the windshield wiper lever page 22, fig. 22 or the button Aat the multifunction  
The average fuel consumption since the memory was last erased is shown in the  
display in litres/100 km page 22, fig. 21. This information can help you to adapt  
your style of driving to the fuel consumption you wish to achieve.  
steering wheel page 23, fig. 23, the function shown last is indicated.  
If you wish to determine the average fuel consumption over a certain period of time  
you must set the memory to zero at the start of the measurement using the button  
Instruments and Indicator/Warning Lights 25  
B
D
A on the windshield wiper lever page 22, fig. 22 or with the handwheel A on  
the multifunction steering wheel* page 23, fig. 23. A zero appears in the display  
for the first 100 m you drive after erasing the memory.  
Average speed  
The average speed since the memory was last erased is shown in the display in  
km/hour page 22. If you wish to determine the average vehicle speed over a  
certain period of time you must set the memory to zero at the start of the measure-  
The indicated value will be updated every 5 seconds while you are driving.  
B
ment using the button Aon the windshield wiper lever page 22, fig. 22 or with  
the handwheel A on the multifunction steering wheel* page 23, fig. 23.  
Note  
D
The amount of fuel consumed will not be indicated.  
A zero appears in the display for the first 100 m you drive after erasing the memory.  
The indicated value will be updated every 5 seconds while you are driving.  
Range  
Current speed*  
The estimated range in kilometres is shown on the display. It indicates the distance  
you can still drive with your vehicle based on the present level of fuel in the tank for  
the same style of driving.  
The current speed which is identical to the display of the speedometer, is indicated  
2
on the display A page 17, fig. 18.  
The readout is shown in steps of 10 km. After lighting up of the indicator light for the  
fuel reserve the display is shown in steps of 5 km.  
Warning against excessive speeds*  
The fuel consumption for the last 50 km is taken as a basis for calculating the range.  
If you drive in a more economical manner from this moment on, the range will be  
increased accordingly.  
If the memory is set to zero (after disconnecting the battery), the fuel consumption  
of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accord-  
ingly to the style of driving.  
Distance driven  
The distance driven since the memory was last erased appears in the display  
page 22. If you wish to measure the distance driven of a particular time, you  
Fig. 25 Warning against  
excessive speeds  
B
must set the memory to zero at this moment in time by pressing the button Aon  
D
the windshield wiper lever page 22, fig. 22 or the handwheel A on the multi-  
function steering wheel* page 23, fig. 23.  
The maximum distance indicated in both switch positions is 9 999 km. The indicator  
is set back to null if this period is exceeded.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
26 Instruments and Indicator/Warning Lights  
Information display*  
Introduction  
Fig. 26 Multi-functional  
indicator: Control elements  
Warning against excessive speeds  
This function enables you to set a speed limit, e.g. if you drive in town. A text in the  
display is intended to draw your attention to the fact that you have exceeded the set  
speed limit.  
Fig. 27 Instrument cluster:  
Information display  
You can set the desired speed limit as follows:  
The information display provides you with information in a convenient way  
concerning the current operating state of your vehicle. The information display  
also provides you with data (depending on the equipment installed in the vehicle)  
relating to the radio, multi-functional indicator, mobile phone and navigation  
system.  
Select the menu point Speed warning --- km/h (warning at --- km/h)..  
Drive e.°g at a speed of 50 km/h.  
B
Press the button A on the windshield wiper lever fig. 26 or the handwheel  
D
A on the multifunction steering wheel* page 23, fig. 23. Speed warning  
50 km/h (warning at 50 km/h) is displayed in the information display*  
Certain functions and operating conditions are always being checked on the  
vehicle when the ignition is switched on and also while driving.  
A
page 25, fig. 25. You can increase or reduce this value with the button A on the  
windshield wiper lever or by turning the handwheel A on the multifunction  
steering wheel*.  
Functional faults, if required repair work and other information are indicated by red  
symbols page 29 and yellow symbols page 29.  
D
B
The value is stored by repeated pressing of the button A on the windshield  
Lighting up of certain symbols is combined with an acoustic warning signal.  
Information and texts giving warnings are also shown in the display page 32.  
The display of text is possible in the following languages:  
D
wiper lever or the handwheel A on the multifunction steering wheel*.  
If you now exceed the set speed limit, Speed 50 km/h exceeded will be shown in  
the display. This message is indicated for as long as the speed is reduced below the  
Czech, English, German, French, Italian, Spanish, Portuguese, Russian and  
Chinese.  
B
set limit or switch off the message by pressing the button A on the windshield  
D
wiper lever fig. 26 or the handwheel A on the multifunction steering wheel*  
page 23, fig. 23.  
You can select the desired language in the setting menu.  
An audible signal sounds as an additional warning signal.  
The set speed limit remains stored even after switching off the ignition.  
The following information can be shown in the display (depending on the equip-  
ment installed on the vehicle):  
Instruments and Indicator/Warning Lights 27  
Operating with the buttons on the windshield wiper lever  
Main menu  
page 27  
page 28  
A
You can activate the MAIN MENU by pressing the rocker switch A  
Door, luggage compartment door and bonnet ajar  
warning  
fig. 28 for more than 1 second.  
A
You can select the menu through the rocker switch A. When the  
Service Interval Display  
page 20  
B
pushbutton Ais briefly pressed, the information you have selected is  
displayed.  
Caution  
Pull out the ignition key while having contact with the display (for example when  
cleaning) in order to prevent any damage.  
Operating with the buttons on the multifunction steering wheel*  
C
You can activate the MAIN MENU by pressing the button A  
fig. 29.  
Main menu  
D
You can select the individual menus by pressing the handwheel A.  
D
After briefly pressing the handwheel A, the desired menu is indi-  
cated.  
C
After briefly pressing the button Ayou can achieve a higher level, by  
C
pressing the button A for longer than 1 second, you can call up the  
MAIN MENU.  
You can select the following information (depending on the equipment installed on  
the vehicle):  
Fig. 28 Information display:  
Controls on the windshield  
wiper lever  
„
„
„
„
„
„
„
„
MFD (Onboard computer) page 21  
Audio*  
Navigation*  
Phone* page 135  
Aux. Heating (auxiliary heating)* page 117  
Assistant* page 60  
Vehicle status page 28  
Setup page 30  
Fig. 29 Information display:  
Controls on the multifunc-  
tion steering wheel  
The menu point Audio is only displayed when the Radio* is switched on.  
The menu point Navigation is only displayed when the Navigation system* is  
switched on.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
28 Instruments and Indicator/Warning Lights  
The menu point Aux. Heating is only then displayed, if the vehicle is fitted with  
auxiliary heating*.  
The symbol goes out as soon as the doors, luggage compartment door and bonnet  
are completely closed.  
The menu point Assistant is only then displayed, if the vehicle is fitted with  
cornering lights*.  
A warning signal sounds if the car is driven at a speed of more than 6km/hour and  
if the engine or the luggage compartment door is open.  
Note  
Auto Check Control*  
If warning messages are shown in the information display page 28  
B
page 28, these messages can be confirmed with the button A on the wind-  
Car state  
D
shield wiper lever or with the button A on the multifunction steering wheel in  
order to call up the main menu.  
If you do not activate the information display at that moment, the menu shifts  
to one level higher every 10 seconds.  
The operation of the radio* or the navigation system* is described in separate  
operating instructions to be found in the on-board literature.  
Door, luggage compartment door and bonnet ajar warning  
Fig. 31 Information display:  
Display of operational fault  
The Auto Check Control carries out a check of certain functions and vehicle compo-  
nents. The check is performed constantly when the ignition is switched on, both  
when the vehicle is stationary, as well as when driving.  
Some operational faults, urgent repairs, service work or other information appear  
in the display of the instrument cluster. The displays are shown with a red or yellow  
light symbol depending on the priority of the message.  
Fig. 30 Information display:  
Door warning  
The red symbols indicate danger (priority 1) while the yellow symbols indicate a  
warning (priortity 2). Information for the driver may also appear in addition to the  
symbols page 32.  
The door, luggage compartment and bonnet ajar warning lights up if at least one  
door, the luggage compartment or bonnet are not closed. The symbol indicates  
which door is still open or whether the luggage compartment door or bonnet is not  
closed fig. 30.  
There is at least one error message when the term Vehicle status is displayed in the  
menu. After selecting this menu the first of the error messages is displayed. Several  
error messages are shown on the display under the message e.°g. 1/3 fig. 31.  
This indicates that the first of a total of three error messages is displayed. The  
Instruments and Indicator/Warning Lights 29  
respective messages are displayed one after the other in an interval of 5 seconds.  
Check as soon as possible the displayed error messages.  
Engine oil pressure too low  
page 36  
As long as the operational faults are not rectified, the symbols are always indicated  
again. After the first display, the symbols are indicated without information for the  
driver.  
Three successive warning signals will sound if a red symbol appears.  
If a fault occurs, a warning signal will also sound in addition to the symbol and text  
in the display:  
Yellow symbols  
A yellow symbol signals a warning.  
Priority 1 - three warning signals  
Priority 2 - one warning signal  
Red symbols  
A red symbol signals danger.  
Fig. 33 Information display:  
Brake pad worn  
Check the relevant function as soon as possible.  
The meaning of the yellow symbols:  
Fig. 32 Information display:  
Oil pressure is low  
Check engine oil level,  
engine oil sensor faulty  
page 221  
page 39  
Bring the vehicle to a stop.  
Switch the engine off.  
Brake pad worn  
One warning signal will sound if a yellow symbol appears.  
Investigate the function indicated.  
Obtain professional assistance.  
If several operational faults of priority 2 exist, the symbols appear one after the  
other and are each illuminated for about 5 seconds.  
Meaning of the red symbols:  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
30 Instruments and Indicator/Warning Lights  
Set-up  
After selecting the menu point Back you will reach one level higher in the menu.  
Displays of the MFA  
Here you can switch off or on certain displays of the multi-functional indicator.  
Comfort*  
You can set the following functions (depending on the equipment installed on the  
vehicle):  
On vehicles with rain sensor you can switch on or off the  
function for automatic closing of the windows and the  
Rain closing  
sliding/tilting roof in case of rain and locked vehicle. If it  
is not raining and the function is set, the windows  
including the sliding/tilting roof are closed automatically  
after approx. 12 hours.  
Fig. 34 Setting the clock  
You can change certain settings by means of the information display. The current  
setting is shown on the information display in the respective menu at the top below  
the line fig. 34.  
Door open  
ATA confirm  
Window op.  
Mirror down  
Mirror adjust.  
Here you can switch on or off the functions for opening  
a single door and automatic closing.  
Here you can set if a signal tone should sound addition-  
ally when activating or deactivating the anti-theft alarm  
system .  
You can select the following information (depending on the equipment installed on  
the vehicle):  
MFD Data (MFA DATA)  
Convenience  
Lights & Vision  
Time  
Here you can set the convenience mode only for the  
driver window or for all the windows.  
Here you can switch on or off the function for mirror  
lowering on the front passenger side when engaging the  
Winter tyres  
Language  
a)  
reverse gear  
.
Here you can switch on or off the function for left and  
right exterior mirror adjustment simultaneously.  
Units  
Assistant (Assistant)  
Alt. speed dis.  
Travel mode  
Service Interval (Service)  
Factory Setting  
Back  
After selecting this menu the convenience setting is  
reset to factory setting. The following is displayed in the  
information display:  
Factory setting  
Factory setting for convenience is set  
a)  
This function is only available on vehicles with an electrically adjustable driver seat.  
Instruments and Indicator/Warning Lights 31  
Lights and Visibility  
without dazzling the oncoming vehicles. The headlight swivel function is deacti-  
vated when switching on this mode. Further information page 61.  
Here you can set how long the light should stay on for the function Coming/Leaving  
Home. Furthermore you can here switch on or off the function daylight driving  
lights and convenience turn signal.  
Service  
Here you can have the kilometers still to be driven and the days until the following  
service interval shown and the Service Interval Display reset.  
After selecting the menu Factory setting the factory setting is established again.  
Time  
Factory Setting  
Here you can set the time, the time format (12 or 24 hour indicator) and the time  
change summer/winter time.  
After selecting the menu Factory Setting the factory setting of the information  
display is established again.  
Winter tyres  
Here you can set at which speed a warning signal should sound. This function is  
used for e.g winter tyres with the permissible maximum speed less than the  
maximum speed of the vehicle.  
When exceeding the speed, the following is displayed on the information display*:  
Snow tyres max. speed ... km/h (Winter tyres maximum ... km/h)  
Language  
Here you can set in which language the warning and information texts should be  
displayed.  
Measures  
Here you can set the units for temperature, consumption and distance driven.  
Assistant  
Here you can adjust the tones of the acoustic signals of the parking aid*.  
Second speed  
2)  
Here you can switch on the display of the second speed in mph or in km/h  
.
Travel mode  
Here you can activate / deactivate the mode “tourist light”. This mode makes it  
possible to drive in countries with opposing traffic system, driving on the left/right,  
2)  
Valid for countries where the values are indicated in British measuring units.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
32 Instruments and Indicator/Warning Lights  
Warning lights  
Overview  
The warning lights indicate certain functions or faults.  
Fig. 35 Instrument cluster with warning lights  
Rear fog light  
page 34  
page 34  
page 34  
page 34  
page 35  
page 35  
Turn signal lights (to the left)  
page 33  
page 33  
page 34  
page 34  
page 34  
Speed regulating system*  
Failure of the light bulbs  
Diesel particle filter* (diesel engine)  
Airbag system  
Turn signal lights (to the right)  
Fog lights  
Main beam light  
Low beam  
Control system for exhaust  
Instruments and Indicator/Warning Lights 33  
Electromechanical power steering  
Engine oil level  
page 35  
page 36  
page 36  
page 37  
page 37  
page 37  
page 38  
page 38  
page 38  
page 39  
page 40  
page 40  
page 39  
page 39  
page 40  
page 40  
Dynamo  
page 41  
page 41  
  
  
Fuel reserve  
Engine oil pressure  
Downhill Drive Support*  
page 41  
EPC fault light (petrol engine)  
Glow plug system (diesel engine)  
Coolant temperature/coolant level  
Traction control system (TCS)  
Electronic stability programme (ESP)*  
Tyre pressure*  
WARNING  
If you do not pay attention to the warning lights coming on and the corre-  
sponding descriptions and warning notes, this may result in severe body  
injuries or major vehicle damage.  
The engine compartment of your car is a hazardous area. There is a risk  
of injuries, scalding, accidents and fire when working in the engine  
compartment, e.g. inspecting and replenishing oil and other fluids. It is also  
essential to observe all warnings page 219, “Working in the engine  
compartment”.  
Note  
Antilock brake system (ABS)  
Boot lid  
The arrangement of the indicator lights depends on the model version. The  
symbols shown in the following functional description are to be found as indicator  
lights in the instrument cluster.  
Operational faults are shown in the instrument cluster as red symbols (priority  
1 - danger) or yellow symbols (priority 2 - warning).  
Open door  
Seat belt warning light  
Brake pad wear*  
Turn signal system   
Either the left or right indicator light flashes depending on the position of the  
turn signal lever.  
Fluid level in windshield washer system*  
Brake system  
The indicator light flashes at twice its normal rate if a turn signal light fails. This does  
not apply when towing a trailer.  
Switching off the hazard warning light system is switched on will cause all of the  
turn signal lights as well as both indicator lights to flash.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
34 Instruments and Indicator/Warning Lights  
Further information about the turn signal system page 64.  
The following text e.g will be displayed in the information display*:  
Check front right dipped beam!  
Fog lights   
The rear side lights and the licence plate lighting require several light bulbs. The  
indicator light only lights up if all light bulbs of the licence plate lighting or the  
parking light (in one rear light unit) are defective. Check regularly the function of the  
light bulbs.  
The warning light comes on when the fog lights are operating page 62.  
Main beam   
Diesel particle filter* (diesel engine)  
The indicator light comes on when the main beam is selected or also when the  
headlight flasher is operated.  
If the warning light comes on, this means that soot has accumulated in the  
diesel particle filter because of the frequent short distances.  
Further information about the main beam page 64.  
In order to clean the diesel particle filter, the vehicle should be driven at an even  
speed of at least 60 km/h at engine speeds of 1 800 - 2 500 rpm for a further 15  
minutes or until the warning light goes out with the 4th or 5th gear engaged when  
the traffic situation permits it. This increases the exhaust temperature and the soot  
deposited in the diesel particle filter is burnt.  
Low beam   
The warning light comes on when low beam is selected page 58.  
Always pay attention to the valid speed limits ⇒  
.
Rear fog light   
The warning light goes out after the successful cleaning of the diesel particle  
filter.  
The warning light comes on when the rear fog lights are operating page 62.  
If the filter is not properly cleaned, the warning light does not go out and the  
warning light begins to flash. In the information display* appears Diesel-  
particle Owner's manual. Afterwards the engine control unit shifts the engine into  
the emergency mode, which only has a reduced power output. After switching the  
ignition off and on again the warning light comes on.  
Cruise control system*  
The warning light lights up, when operating the speed regulating system.  
Have the vehicle inspected without delay by your specialist garage.  
Failure of the light bulbs   
WARNING  
The warning light comes on if a light bulb is damaged:  
If you do not pay attention to the warning light coming on and the corre-  
sponding descriptions and warning notes, this may result in injuries or  
major vehicle damage.  
up to 2 seconds after the ignition is switched on;  
when switching on the defective light bulb.  
Instruments and Indicator/Warning Lights 35  
If the airbag was switched off using the airbag switch* in the stowage  
compartment on the front passenger side:  
WARNING (continued)  
Always adjust your speed to suit weather, road, region and traffic condi-  
tions. The route indicated by the warning light must not tempt you to disre-  
gard the national regulations for road traffic.  
the warning light comes on for 4 seconds after the ignition has been  
switched on;  
switching off the airbag is indicated in the middle of the dash panel by the  
lighting up of the yellow indicator light for 65 seconds in display     
 page 167.  
Caution  
As long as the warning light lights up, one must take into account an increased  
fuel consumption and in certain circumstances a power reduction of the engine.  
WARNING  
Have the airbag system checked immediately by a specialist garage if a fault  
exists. Otherwise, there is a risk of the airbag not being activated in the event  
of an accident.  
Note  
Further information about diesel particle filter page 184.  
Control system for exhaust   
Airbag system   
The warning light comes on after the ignition has been switched on.  
Monitoring the airbag system  
The warning light comes on for a few seconds when the ignition is switched on.  
If the warning light does not go out after starting the engine or it lights up when  
driving, a fault exists in an exhaust relevant component. The engine management  
system selects an emergency programme which enables you to drive to the nearest  
specialist garage by adopting a gentle style of driving.  
There is a fault in the system if the warning light does not go out or flashes while  
driving ⇒  
. This also applies if the warning light does not come on when the igni-  
tion is switched on.  
The following text will be displayed in the information display*:  
Electromechanical power steering   
Airbag fault!  
The functionality of the airbag system is also monitored electronically when one  
airbag has been switched off.  
The warning light comes on for a few seconds when the ignition is switched on.  
If the warning light after switching on the ignition or when driving lights up contin-  
uously, a fault exists in the electromechanical power steering.  
Front, side and head airbags or belt tensioner which have been switched off  
using the vehicle system tester:  
If the yellow warning light lights up , this indicates a partial failure of the  
power steering and the steering assist can be reduced.  
If the red warning light lights up , this indicates a complete failure of the  
The warning light lights up for 4 seconds after switching on the ignition and  
then flashes again for 12 seconds in intervals of 2 seconds.  
The following text will be displayed in the information display*:  
Airbag/belt tensioner deactivated!  
power steering and the steering assist has failed.  
Further information page 182.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
36 Instruments and Indicator/Warning Lights  
WARNING  
WARNING  
Contact your specialist garage if the power steering is defective.  
If you must stop for technical reasons, then park the vehicle at a safe  
distance from the traffic and switch off the engine and switch on the hazard  
warning light system.  
Note  
The red oil pressure light is not an oil level indicator! One should  
If the yellow warning light goes out after starting the engine again and a short  
drive, it is not necessary to visit a specialist garage.  
If the battery has been disconnected and reconnected, the yellow warning light  
therefore check the oil level at regular intervals, preferably after every refu-  
eling stop.  
comes on after switching on the ignition. The warning light must go out after  
Engine oil level   
driving a short distance.  
Warning light lights up  
Engine oil pressure   
If the warning light lights up, the quantity of oil in the engine is probably too  
low. Check as soon as possible the oil level or top up page 222 with engine oil.  
3)  
The warning light comes on for a few seconds when the ignition is switched  
on.  
A peep sounds as an additional warning signal.  
The following text will be displayed in the information display*:  
Check oil level!  
Stop the vehicle and switch the engine off if the warning light does not go off  
after the engine has started or flashes while driving. Check the oil level and top up  
with oil as necessary page 222, “Replenishing engine oil”.  
The warning light will go out if the bonnet is left open for more than 30 seconds. If  
no engine oil has been replenished, the warning light will come on again after  
driving about 100 km.  
An audible signal sounds three times as an additional warning signal.  
Do not continue your journey if for some reason it is not possible under the  
conditions prevailing to top up with oil. Keep the engine switched off and obtain  
professional assistance from a specialist garage, otherwise it could lead to severe  
engine damage.  
Warning light flashes  
A fault on the engine oil level sensor is indicated additionally by an audible signal  
and the warning light coming on several times after the ignition has been switched  
on.  
Do not drive any further if the warning light flashes even if the oil is at the correct  
level. Do not run the engine not at idling speed either. Contact the nearest specialist  
garage to obtain professional assistance.  
In this case have the engine inspected without delay by a specialist garage.  
The following text will be displayed in the information display*:  
Oil sensor Workshop!  
The following text will be displayed in the information display*:  
Oil Pressure Engine off! Owner's manual!  
3)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if a fault exists or the engine oil level is too low.  
Instruments and Indicator/Warning Lights 37  
The coolant temperature is too high or the coolant level too low if the warning light  
does not go out or flashes while driving.  
EPC fault light  (petrol engine)  
The  (Electronic Power Control) warning light comes on for a few seconds when  
the ignition is switched on.  
3 peeps sound as an additional warning signal.  
In this case stop and switch the engine off and check the coolant level; top up the  
If the warning light  does not go out or lights up after starting the engine, a fault  
exists in the engine control. The engine management system selects an emergency  
programme which enables you to drive to the nearest specialist garage by adopting  
a gentle style of driving.  
coolant as necessary.  
Do not continue your journey if for some reason it is not possible under the  
conditions prevailing to top up with coolant. Keep the engine switched off and  
obtain professional assistance from a specialist garage, otherwise it could lead to  
severe engine damage.  
The following text will be displayed in the information display*:  
Engine fault Workshop!  
If the coolant is within the specified range, the increased temperature may be  
caused by an operating problem at the coolant fan. Check the fuse for the coolant  
fan, replace it if necessary page 253, “Fuse assignment in engine compartment -  
version 1” or page 255, “Fuse assignment in engine compartment - version 2”.  
Glow plug system (diesel engine)  
Do not continue driving if the warning light does not go off although the fluid is at  
the correct level and also the fuse of the fan is in proper order. Contact a specialist  
garage to obtain assistance.  
The warning light lights up for a cold engine when switching on the ignition  
(pre-heat position) 2 page 121. Start the engine after the indicator light goes out.  
The glow plug indicator light will come on for about 1 second if the engine is at a  
normal operating temperature or if the outside temperature is above +5°C. This  
means that you can start the engine right away.  
Please also refer to the additional instructions page 222, “Cooling system”.  
The following text will be displayed in the information display*:  
Check coolant! Owner's manual  
There is a fault in the glow plug system if the warning light does not come on  
or lights up continuously; contact a specialist garage as soon as possible to obtain  
assistance.  
WARNING  
If the warning light begins to flash while driving, a fault exists in the engine  
control. The engine management system selects an emergency programme which  
enables you to drive to the nearest specialist garage by adopting a gentle style of  
driving.  
If you must stop for technical reasons, then park the vehicle at a safe  
distance from the traffic and switch off the engine and switch on the hazard  
warning light system page 64.  
Take care when opening the coolant expansion bottle. If the engine is hot,  
the cooling system is pressurized - risk of scalding! It is best to allow the  
engine to cool down before removing the cap.  
The following text will be displayed in the information display*:  
Engine fault Workshop!  
Do not touch the coolant fan The coolant fan may switch on automati-  
cally even if the ignition is off.  
Coolant temperature/ Coolant quantity   
4)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if the coolant temperature is too high or the coolant level  
is too low.  
4)  
The warning light comes on for a few seconds when the ignition is switched on.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
38 Instruments and Indicator/Warning Lights  
If the warning light comes on immediately after starting the engine, the ESP  
system can be switched off for technical reasons. In this case, the ESP system can  
be switched on again by switching the ignition on and off. If the warning light goes  
out, the ESP system is fully functional again.  
Traction control system (TCS)  
The warning light comes on for a few seconds when the ignition is switched on.  
The warning light flashes when a control cycle is activated while driving.  
The warning light lights up if the TCS system is switched off.  
Further information on the ESP page 177, “Electronic stability programme  
(ESP)*”.  
The warning light lights up permanently if there is a fault in the TCS system.  
Electronic Differential Lock (EDL)*  
The fact that the TCS system operates together with the ABS means that the TCS  
warning light will also come on if the ABS system is not operating properly.  
The EDL is a part of the ESP. A fault in the EDL is indicated by the ESP warning light  
in the instrument cluster. Have the vehicle inspected immediately by your specialist  
garage. Further information on the EDL page 178, “Electronic Differential Lock  
(EDL)*”.  
If the warning light comes on immediately after starting the engine, the TCS  
system can be switched off for technical reasons. In this case, the TCS system can  
be switched on again by switching the ignition on and off. If the warning light goes  
out, the TCS system is fully functional again.  
Note  
Further information about the TCS page 179, “Traction control system (TCS)”.  
If the battery has been disconnected and reconnected, the warning light comes  
on after switching on the ignition. The warning light must go out after driving a short  
distance.  
Note  
If the battery has been disconnected and reconnected, the warning light comes  
on after switching on the ignition. The warning light must go out after driving a short  
distance.  
Tyre inflation pressure*   
The warning light lights up, if there is a substantial drop in inflation pressure in  
one of the tyres. Reduce the speed and check or correct as soon as possible the  
inflation pressure in the tyres page 232.  
Electronic stability programme (ESP)*   
The warning light comes on for a few seconds when the ignition is switched on.  
If the warning light flashes, there is a system fault. Visit the nearest specialist garage  
and have the fault rectified.  
Components of the ESP system also include the Traction Control System (TCS), the  
Electronic Differential Lock (EDL) and the Antilock Brake System (ABS).  
Further information about tyre pressure-control system page 183.  
The warning light flashes quickly when a control cycle is activated while driving.  
If the ESP system is switched off, only the TCS system switches off.  
The warning light flashes slowly if the ESP system is switched off.  
WARNING  
When the warning light lights up, immediately reduce the speed and  
avoid sudden steering and brake manoeuvres. Please stop the vehicle  
without delay at the nearest possible stop and inspect the tyres and their  
inflation pressures.  
The warning light lights up permanently if there is a fault in the ESP system.  
The fact that the ESP system operates together with the ABS means that the ESP  
warning light will also come on if the ABS system is not operating properly.  
Instruments and Indicator/Warning Lights 39  
WARNING (continued)  
WARNING (continued)  
level in the reservoir page 225, “Brake fluid”. If the fluid level has dropped  
below the MIN marking, do not drive any further - risk of accident! Obtain  
professional assistance.  
Under certain circumstances (e.g. sporty style of driving, wintry or  
unpaved roads) the warning light can be delayed or does not light up at  
all.  
Pay attention to the following instructions before checking the brake  
fluid level and opening the bonnet page 219, “Working in the engine  
Note  
compartment”.  
If the battery has been disconnected, the warning light comes on after switching  
on the ignition. The warning light must go out after driving a short distance.  
If the brake fluid is at the correct level, the ABS control function has  
failed. The rear wheels may then block very rapidly when braking. In certain  
circumstances, this can result in the rear end of the car breaking away - risk  
of skidding! Drive carefully to the nearest specialist garage and have the  
fault rectified.  
Antilock brake system (ABS)   
The warning light shows the functionality of the ABS.  
Seat belt warning light   
The warning light comes on for a few seconds after the ignition has been switched  
on or when starting the engine. The warning light goes out after an automatic check  
sequence has been completed.  
The warning light comes on after the ignition is switched on as a reminder for the  
driver and front passenger to fasten the seat belt. The warning light only goes out if  
the driver or front passenger has fastened his seat belt.  
A fault in the ABS  
The system is not functioning properly if the ABS warning light does not go out  
within a few seconds after switching on the ignition, does not light up at all or lights  
up while driving. The vehicle will only be braked by the normal brake system. Visit  
a specialist garage as quickly as possible and adjust your style of driving appropri-  
ately as you will not know how great the damage is.  
If the seat belt has not been fastened by the driver or front passenger, a permanent  
warning signal sounds at vehicle speeds greater than 20 km/h and simultaneously  
the warning light flashes.  
If the seat belt is not fastened by the driver or front passenger during the next 90  
seconds, the warning signal is deactivated and the warning light lights up perma-  
nently.  
Further information about ABS page 181, “Antilock brake system (ABS)”.  
A fault in the entire brake system  
Further information on the seat belts page 152, “Seat belts”.  
If the ABS warning light comes on together with the brake system warning light  
(handbrake must be released), there is a fault not only in the ABS but also in  
Thickness of the brake pads*   
another part of the brake system ⇒  
.
5)  
The warning light comes on for a few seconds when the ignition is switched  
WARNING  
on.  
If the brake system warning light comes on together with the ABS  
warning light stop the vehicle immediately and check the brake fluid  
5)  
The warning light on vehicles fitted with information display does not come on after  
switching the ignition on, but only if a fault exists.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
40 Instruments and Indicator/Warning Lights  
If the warning light comes on, contact a specialist garage immediately and have  
the brake pads on all of the wheels inspected.  
The following text will be displayed in the information display*:  
Add wash fluid!  
The following text will be displayed in the information display*:  
Check brake pads!  
Brake system   
The warning light flashes or comes on if the brake fluid level is too low, if there  
is a fault in the ABS or if the handbrake is applied.  
Boot lid   
The warning light comes on when the ignition is switched on if the luggage  
compartment door is open. If the boot lid opens while driving , the warning light  
lights up and an audible signal sounds.  
If the warning light flashes and an audible signal sounds three times (handbrake  
is not applied), stop and check the brake fluid level ⇒  
.
The following text will be displayed in the information display*:  
An audible signal sounds as an additional warning signal.  
Brake fluid Owner's manual  
The warning light comes on even when the ignition is switched off. The warning  
light lights up for a maximum of 5 minutes.  
If there is a fault in the ABS which also influences the function of the brake system  
(e.g. distribution of brake pressure), the ABS warning light comes on and at the  
same time the brake system warning light starts flashing . Be aware that not only  
On vehicles with information display* this warning light is replaced by a vehicle  
symbol page 28.  
the ABS but also another part of th brake system is defective ⇒  
.
An audible signal sounds three times as an additional warning signal.  
Open door  
One should get used to high pedal forces, long braking distances and long free play  
of the brake pedal when driving to the next specialist garage.  
The warning light comes on, if one or several doors are opened. If one of the  
doors opens while driving, the warning light lights up and an audible signal  
sounds.  
For further information on the brake system page 180, “Brakes”.  
Handbrake applied  
The warning light also comes on if the handbrake is applied. An audible warning  
is also given if you drive the vehicle for at least 3 seconds at a speed of more than 6  
km/h.  
The warning light comes on even when the ignition is switched off. The warning  
light lights up for a maximum of 5 minutes.  
On vehicles with information display* this warning light is replaced by a vehicle  
symbol page 28.  
The following text will be displayed in the information display*:  
Release parking brake!  
Windshield washer fluid level*  
WARNING  
The warning light comes on when the ignition is switched on if there is insuffi-  
cient fluid in the windshield washer system. Top up with liquid page 230.  
Pay attention to the following instructions before checking the brake  
fluid level and opening the bonnet page 219, “Working in the engine  
compartment”.  
Instruments and Indicator/Warning Lights 41  
Downhill Drive Support*  
WARNING (continued)  
If the brake system warning light does not go out a few seconds after  
The warning light comes on for a few seconds when the ignition is switched on.  
The warning light comes on when the speed of the car is less than 30 km/h and after  
pressing the Offroad button page 185.  
switching on the ignition or comes on when driving, stop immediately and  
check the brake fluid in the reservoir page 225. If the fluid level has  
dropped below the MIN marking, do not drive any further - risk of accident!  
Obtain professional assistance.  
The warning light flashes during the control cycle of the Downhill Drive Support.  
If your vehicle exceeds the speed of 30 km/h, the Downhill Drive Support is deacti-  
vated. The warning light goes out. If the speed is subsequently reduced below 30  
km/h, the Downhill Drive Support is activated. The warning light comes on.  
Alternator   
The Downhill Drive Support is activated again when the engine is switched off and  
the car is restarted within 30 seconds.  
The warning light comes on after the ignition has been switched on. It should go  
out after the engine has started.  
The Downhill Drive Support is deactivated after switching off the ignition.  
If the warning light does not go out after the engine has started, or comes on when  
driving, drive to the nearest specialist garage. The vehicle battery will be discharged  
in this case so switch off all non-essential electrical components.  
In the event of a fault, the warning light does not come on when the speed of the  
car is less than 30 km/h and after pressing the Offroad button.  
Further information about the Offroad system page 185, “Off-road*”.  
Caution  
If the warning light comes on when driving and in addition the warning light   
(cooling system fault) also comes on in display, you must then stop the car imme-  
diately and switch the engine off - risk of engine damage!  
Fuel reserve   
The warning light comes on, if the fuel level is still below 10.5 litres.  
An audible signal sounds as an additional warning signal.  
The following text will be displayed in the information display*:  
Please refuel! Range...km  
Note  
The Text in the information display* goes out only after refuelling and driving a  
short distance.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
42 Unlocking and locking  
Unlocking and locking  
Key  
WARNING (continued)  
vehicle. The children might otherwise start the engine or operate electrical  
equipment (e.g. power windows) - risk of injury!  
Do not withdraw the ignition key from the ignition lock until the vehicle  
has come to a stop. The steering lock might otherwise engage unintention-  
ally - risk of accident!  
Caution  
Each key contains electronic components; therefore protect them against mois-  
ture and severe shocks.  
Fig. 36 Set of keys without  
remote control  
Keep the groove of the keys absolutely clean as impurities (textile fibres, dust  
etc.) have a negative effect on the proper operation of the locking cylinder and the  
ignition lock.  
Note  
Please approach a specialist garage if you lose a key since he can obtain a new one  
for you.  
Fig. 37 Remote control key  
Two keys are provided with the vehicle. Depending on the equipment, your vehicle  
can be equipped with keys without radio remote control fig. 36 or with radio  
remote control* fig. 37.  
WARNING  
Always withdraw the key whenever you leave the vehicle - even if it is  
only for a short time. This is particularly important if children are left in the  
Unlocking and locking 43  
Take off the cover of the transmitter housing fig. 39 in direction of  
arrow.  
Changing the battery of the radio remote control  
Take the used battery out of the housing cover.  
Insert the new battery. Ensure that the “+” symbol on the battery is  
facing downwards. The correct polarity is also shown on the cover of  
the transmitter housing.  
Insert cover with battery in place at the rear of the transmitter housing  
and press both parts together.  
Insert the transmitter housing into the front part of the key so that the  
two parts lock into each other.  
Fig. 38 Disconnect key with  
radio remote control  
For the sake of the environment  
Dispose of an old battery in accordance with environmental regulations.  
Note  
The replacement battery must have the same specification as the original  
battery.  
If it is still not be possible to unlock or lock the vehicle with the remote control  
even after replacing the battery this means that the system has to be synchronised  
Fig. 39 Cover of the trans-  
mitter housing  
page 50.  
Each remote control key contains a battery which is housed in the cover  
Electronic immobiliser  
B
Aof the transmitter housing page 43, fig. 38. We recommend having  
the battery of the key replaced by a specialist garage. You should,  
however, proceed as follows if you wish to replace the battery yourself:  
The electronic immobiliser prevents the vehicle being operated by an  
unauthorised person.  
Fold open the key.  
An electronic chip is integrated in the head of the key. The immobiliser is deacti-  
vated with the aid of this chip when the key is inserted in the ignition lock. The elec-  
tronic immobiliser is automatically activated when you withdraw the ignition key  
from the lock.  
A
Use a thin screwdriver to carefully lever off the front part of the key A  
page 43, fig. 38 from the transmitter housing A.  
B
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
44 Unlocking and locking  
Note  
So long as the child safety lock is switched on it is not possible to open the door  
from the inside with the door opening lever. In this case the door can be opened  
only from the outside.  
It is only possible to start the engine of your car with a Genuine Škoda key with the  
matching code.  
Central locking system  
Child safety lock  
Description  
The child safety lock prevents the rear door from being opened from  
the inside.  
When using the central locking and unlocking system, all the doors and the fuel  
filler flap* are locked or unlocked at the same time (if it was not set differently in the  
menu point Setups - Convenience of the information display*). The boot lid is  
unlocked when opening. It can be opened by pressing the hand grip above the  
licence plate page 48.  
Operation of the central locking system is possible:  
from the outside using the vehicle key page 46,  
using the button for the central locking system page 46,  
by using the remote control page 49.  
Fig. 40 Child safety locks on  
the rear doors  
Indicator light in the driver's door on vehicles without anti-theft alarm system  
After the car is locked, the indicator light flashes after 2 seconds.  
The rear doors are equipped with a child safety lock. You can switch the  
child safety lock on and off using the vehicle key.  
After the car is locked with the deactivated safe securing system, the indicator light  
flashes only after 30 seconds.  
Indicator light in the driver's door on vehicles with anti-theft alarm system  
Switching child safety lock on  
After locking the vehicle the indicator light flashes for 2 seconds fast, then more  
slowly.  
Use the vehicle key to turn the slit in the rear door to the left in the  
direction of the arrow fig. 40.  
If the vehicle is locked and the safe securing system page 45 is not operating, the  
indicator light in the driver door flashes for about 2 seconds fast, goes out and starts  
to flash slowly after about 30 seconds.  
Switching child safety lock off  
Use the vehicle key to turn the slit to the right against the direction of  
the arrow.  
If the indicator light first of all flashes fast for about 2 seconds, afterwards lights up  
for about 30 seconds and then flashes slowly, there is a fault in the system of the  
central locking or the interior monitor* page 51. Visit a specialist garage to  
obtain assistance.  
Unlocking and locking 45  
Convenience operation of windows  
Emergency locking of the door page 47.  
Emergency unlocking of the boot lid page 48.  
One can open and close the electrically powered windows when unlocking and  
locking the vehicle page 54.  
Opening a single door*  
Safe securing  
This function makes it possible to only unlock the driver's door. The other doors and  
the fuel filler flap* remain locked and are only unlocked after repetitive unlocking.  
The central locking system is equipped with a safe securing system. Locking the  
vehicle from the outside causes the door locks to be automatically blocked. It is not  
possible to open the doors with the door handle either from the inside or from the  
outside. This acts as an effective deterrent for attempts to break into your vehicle.  
If you wish, you can have a specialist garage activate the function of the single door  
opening mode or you can activate it yourself in the menu of the information  
display* page 26.  
You can deactivate the safe securing system by locking twice within 2°seconds.  
Automatic locking*  
If the safe securing system is not operating, the warning light in the driver door  
flashes for about 2 seconds fast, goes out and starts to flash slowly again after about  
30°seconds.  
All the doors and the boot lid are locked automatically once the car reaches a speed  
of about 15 km/h.  
If the ignition key is withdrawn, the car is then automatically unlocked again. In  
addition, it is possible for the driver to unlock the car by pressing the central locking  
button page 44 or by pulling the door opening lever.  
The safe securing system is again activated the next time the vehicle is unlocked and  
locked again.  
The doors can be opened from the inside if the vehicle is locked and the safe  
securing system is deactivated:  
If you wish, you can have a specialist garage activate the function of the single door  
opening mode or you can activate it yourself in the menu of the information  
display* page 26.  
The door is unlocked by actuating the door-opening lever.  
The door opens upon actuating the door-opening lever again.  
WARNING  
WARNING  
Locking the doors prevents involuntary opening in an exceptional situation  
(an accident). Locked doors prevent unwanted entry into the vehicle from  
outside, for example at road crossings. Locked doors do, however, make it  
more difficult for rescuers to get into the vehicle in an emergency - danger to  
life!  
If the vehicle is locked from the outside and the safe securing system is acti-  
vated, there must not be any person and animals in the vehicle as it is then  
not possible to open either a door or a window from the inside. The locked  
doors make it more difficult for rescuers to get into the vehicle in an emer-  
gency - hazard!  
Note  
In the event of an accident in which the airbags are deployed, the locked doors  
are automatically unlocked in order to enable rescuers to gain access to the vehicle.  
Only the front doors can be unlocked and locked using the key if the central  
Note  
The anti-theft alarm system* is also activated with the deactivated safe securing  
system when locking the vehicle. The interior monitor* is however not activated.  
locking system fails. You can lock or unlock manually the other doors and the boot  
lid.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
46 Unlocking and locking  
door. The alarm will be triggered if you do not switch on the ignition within 15  
seconds.  
Unlocking the vehicle using the key  
Locking the vehicle with the key  
Turn the key in the locking cylinder of the driver's door in the opposite  
B
direction of travel (lock position) A fig. 41.  
The doors, the boot lid and the fuel filler flap* are locked.  
The switched on interior lights will switch off over the door contact.  
The windows and the electric sliding/tilting roof* are closed provided the key is  
held in the lock position.  
Fig. 41 Turning the key for  
unlocking and locking the  
vehicle  
The safe securing system is activated immediately.  
The indicator light in the driver door begins flashing.  
Turn the key in the locking cylinder of the driver's door in the direction  
A
of travel (unlock position) A fig. 41.  
Pull on the door handle and open the door.  
Note  
The opened driver door cannot be locked. It must be locked separately after closing  
it.  
All the doors (only the driver's door on vehicles with anti-theft alarm system)  
and the fuel filler flap* are unlocked.  
The boot lid is then unlocked.  
Button for the central locking system  
The switched on interior lights come on over the door contact.  
The safe securing system is deactivated.  
The windows are opened provided the key is held in the unlock position*. On  
vehicles fitted with anti-theft alarm system the window operation is only possible  
45 seconds after deactivation of the warning system.  
The indicator light in the driver's door stops flashing if the vehicle is not fitted  
with an anti-theft alarm system* page 50.  
Note  
If the vehicle is equipped with an anti-theft alarm system*, you must unlock the  
vehicle by inserting the key into the driver door you then have to insert the key into  
the ignition lock and switch the ignition on within 15 seconds after opening the  
Fig. 42 Centre console:  
Buttons for central locking  
Unlocking and locking 47  
If the vehicle was not locked from outside, you can also unlock and lock  
it with the rocker switch on the centre console without the ignition  
switched on.  
WARNING (continued)  
the doors are locked. Locked doors make it difficult for rescuers to get into  
the vehicle in an emergency - hazard!  
Locking all doors and the boot lid  
1
Note  
Press button Apage 46, fig. 42. The symbol in the button comes  
on.  
The door opening lever and the buttons for the central locking system do not  
operate if the safe securing system is activated.  
Unlocking all doors and the boot lid  
2
Press button A page 46, fig. 42. The symbol goes out in the  
Emergency locking of the doors  
button.  
1
The following applies if you have locked your vehicle using the button A:  
It is not possible to open the doors or the boot lid from the outside (safety  
feature, e.g. when stopping at traffic lights etc.).  
You can unlock the doors individually from the inside and open them by pulling  
the door opening lever.  
As long as one door is opened , this door cannot be locked in order to avoid  
6)  
inadvertently locking the key in the vehicle. All the other closed doors and the boot  
lid are locked.  
Fig. 43 Rear door: Emer-  
gency locking of the door  
In the event of an accident in which the airbags are deployed, the locked doors  
are automatically unlocked from the inside in order to enable rescuers to gain  
access to the vehicle.  
All the other doors without locking cylinder have an emergency locking  
which is only visible once the door is opened. The emergency locking  
must be used in particular if the vehicle battery fails.  
1
2
By pressing and holding the button A or A, you can conveniently close or open  
the windows page 54.  
Locking  
WARNING  
A
Remove the panel A fig. 43.  
The central locking system also operates if the ignition is switched off. All the  
doors and the boot lid are locked. Children should never be left unattended  
in the vehicle since it is difficult to provide assistance from the outside when  
B
Insert the key into the slot A and turn it into the horizontal position  
in the direction of the arrow (mirror-inverted on the right doors).  
Re-insert the panel.  
6)  
Is not valid for the boot lid.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
48 Unlocking and locking  
After closing the door, you can no longer open it from outside. If the child safety  
lock is not activated, it is possible to open the door from the inside by pulling once  
on the door handle. If the child safety lock is activated (only on the rear doors), first  
of all it is necessary to pull once on the inner door handle and then open the door  
from the outside.  
WARNING  
Ensure that the lock is properly engaged after closing the boot lid. Other-  
wise, the boot lid might open suddenly when driving even if the boot lid lock  
is closed - risk of accident!  
Never drive with the boot lid fully opened or slightly ajar otherwise  
exhaust gases may get into the interior of the vehicle - risk of poisoning!  
Do not press on the rear window when closing the boot lid, it could crack  
Boot lid  
- risk of injury!  
Note  
After closing the boot lid, it is automatically locked within 2 seconds and  
the anti-theft alarm system* is activated. This applies only if the vehicle was  
locked before closing the boot lid.  
The function of the hand grip above the licence plate is deactivated when  
starting off or as of a speed of more than 5 km/hour for vehicles with central  
locking. The function of the hand grip is activated again when the vehicle has  
stopped and a door is opened.  
Fig. 44 Handle of boot lid  
Open the boot lid by pressing the hand grip above the licence plate after  
unlocking the vehicle using the key or the radio remote control.  
Emergency unlocking of the boot lid  
Opening the boot lid  
Press on the handle fig. 44 and at the same time raise the boot lid.  
Closing the boot lid  
Pull the boot lid down and close it with a slight swing ⇒  
.
A handle which makes the closing easier is located on the inner paneling of the  
boot lid.  
Fig. 45 Emergency  
unlocking of the boot lid  
Unlocking and locking 49  
The operation of the remote control may temporarily be affected by interfer-  
ence from transmitters close to the car and which operate in the same frequency  
range (e.g. mobile phone, TV transmitter).  
If there is a fault in the central locking, you can open the boot lid as  
follows:  
Fold one of the outer rear seats forwards.  
The battery must be replaced, ideally by a specialist garage, if the central locking  
or anti-theft alarm system does react to the remote control at less than 3 metres  
away.  
Move the operating lever with the aid of a narrow object, e.g. a screw-  
1
driver, up to the stop in the direction of arrow Aand then unlock the  
If the driver door is opened, the vehicle cannot be locked using the remote  
2
boot lid in the direction of arrow A.  
control.  
Open the boot lid/luggage compartment door from outside.  
Unlocking and locking car  
Remote control*  
Description  
You can use the remote control:  
to unlock and lock the car,  
unlocking boot lid,  
electrically open and close the windows.  
The transmitter with the battery is housed in the handle of the master key. The  
receiver is located in the interior of the car. The operating range of the remote  
control is approx. 10 m. But this range of the remote control can be reduced if the  
batteries are weak.  
Fig. 46 Remote control key  
Unlocking the vehicle  
The master key has a fold-open key bit which can be used for unlocking and locking  
the car manually and also for starting the engine.  
1
Press the button A fig. 46 for about 1 second.  
If a lost key is replaced or if the receiver unit has been repaired or a new unit  
installed, it is then necessary for a specialist garage to adapt the system. Only after  
this is it possible to again use the remote control.  
Locking the vehicle   
3
Press button A for about 1 second.  
Deactivating safe securing system  
Note  
2
Press button A twice in 3 seconds. Further information page 45.  
The remote control is automatically deactivated when the ignition is switched  
on.  
Boot lid remote release  
2
Press button A for about 2 second. Further information page 48.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
50 Unlocking and locking  
Folding out of the key  
Synchonisation of the remote control  
4
Press button A.  
If the vehicle cannot be unlocked by actuating the remote control system then it is  
possible that the code in the key and the control unit in the vehicle are no longer  
synchronised. This can occur when the buttons on the radio-operated key are actu-  
ated a number of times outside of the operative range of the equipment or the  
battery on the remote control was replaced.  
Folding up of the key  
4
Press button A and collapse the key bit in the housing.  
The turn signal lights flash twice as confirmation that the vehicle has been  
unlocked. The vehicle will lock again automatically if you unlock the vehicle using  
This means it is necessary to synchronise the code as follows:  
1
button A but do not open a door or the boot lid within the next 30 seconds. This  
Press any button on the remote control.  
function is intended to prevent the car being unlocked unintentionally.  
pressing of the button means that the door will unlock with the key within 1  
minute.  
In addition, when the car is unlocked, the electrically adjustable seats and exterior  
mirrors* move into the position assigned to this key. The stored setting of driver  
seat and exterior mirrors is retrieved.  
Anti-theft alarm system*  
Display of the locking  
The turn signal lights flash once to confirm that the vehicle has been correctly  
locked.  
Description  
3
If the vehicle is locked by pressing the button Aand some doors or the boot lid are  
The anti-theft alarm system increases the level of protection against people seeking  
to break into the vehicle. The system triggers audible and visual warning signals if  
an attempt is made to break into the vehicle.  
not closed, the turn signal lights flash only after closing.  
WARNING  
How is the alarm system activated?  
If the vehicle is locked from the outside and the safe securing system is acti-  
vated, there must not be any person in the vehicle as it is then not possible  
to open either a door or a window from the inside. The locked doors make it  
more difficult for rescuers to get into the vehicle in an emergency - hazard!  
The anti-theft alarm system is activated automatically when the vehicle is locked  
with the key on the closed driver's door or by using the radio remote control. It is  
activated 30 seconds after locking the door.  
How is the alarm system deactivated?  
The anti-theft alarm system is deactivated if the vehicle is unlocked by only using  
the radio remote control. The vehicle is automatically locked again if the vehicle is  
not opened within 30 seconds after reactivating the anti-theft alarm system.  
Note  
Operate the radio remote control only when the doors and boot lid are closed  
and you have visual contact with the vehicle.  
Once in the car, you must not press the lock button of the radio remote  
control before inserting the key into the ignition lock in order to avoid the car being  
inadvertently locked and the anti-theft alarm system* being switched on. Should  
this happen, press the unlock button of the radio remote control.  
Once you unlock the vehicle by inserting the key into the driver door you then have  
to insert the key into the ignition lock and switch the ignition on within 15 seconds  
after opening the door in order to deactivate the anti-theft alarm system. The  
alarm will be triggered if you do not switch on the ignition within 15 seconds.  
Unlocking and locking 51  
Interior monitor* and Towing protection monitoring*  
When is the alarm triggered?  
The following security areas of the locked vehicle are monitored:  
Bonnet,  
Boot lid,  
Doors,  
Ignition lock,  
Angle of the vehicle* page 51,  
Vehicle interior* page 51,  
A drop in voltage of the on-board power supply.  
Fig. 47 Button for interior  
monitor and towing protec-  
tion monitoring  
An alarm is immediately triggered if either of the two battery terminals is discon-  
nected while the anti-theft alarm system is activated.  
How is the alarm switched off?  
Switch off the interior monitor and towing protection monitoring  
You switch the alarm off if you unlock the car with the radio remote control in the  
key or if you switch the ignition on.  
Switch off the ignition.  
Open the driver door.  
Note  
Press the button at the centre column on the driver side fig. 47,  
the symbol which lights up in the button changes from red to  
orange.  
The working life of the alarm siren is 6 years. More detailed information is avail-  
able by a specialist garage.  
Before leaving the car, check that all the doors, windows and the electric  
Lock the vehicle within 30 seconds.  
sliding/tilting roof* are properly closed in order to ensure that the anti-theft alarm  
system is fully operational.  
The interior monitor and the towing protection monitoring are switched on again  
automatically the next time the car is locked.  
Coding of the radio remote control and the receiver unit precludes the use of  
the radio remote control from other vehicles.  
Note  
You can switch the interior monitor and the towing protection monitoring off if  
there is a possibility that movements from (e.g. children or animals) inside the  
vehicle interior or if the vehicle must be transported (e.g. by train or ship) or towed,  
might trigger the alarm.  
The opened storage compartment for spectacles reduces the effectiveness of  
the interior monitor. In order to ensure the function of the interior monitor to be  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
52 Unlocking and locking  
fully operational, always close the storage compartment for spectacles before  
locking the vehicle.  
Additionally you can close the window automatically (fully closed) by  
pulling the button up to the stop. Renewed pulling of the button  
causes the window to stop immediately.  
Power windows*  
The button for the individual windows is located in the armrest of the driver's door  
fig. 48, front passenger door and in the rear doors* page 53.  
Buttons on the driver's door  
Buttons for the power windows in the armrest for the driver  
A
A Button for the power window in the driver's door  
B
A Button for the power window in the front passenger's door  
C
A Button for the power window in the rear door on the right*  
D
A Button for the power window in the rear door on the left*  
S
A Safety pushbutton*  
Safety pushbutton*  
You can deactivate the buttons for power windows at rear doors by pressing the  
Fig. 48 Buttons on the  
driver's door  
S
safety pushbutton A fig. 48. The buttons for power windows at rear doors are  
S
activated again by pressing the safety pushbutton A again.  
If the buttons for the rear doors are deactivated, the indicator light in the safety  
The power windows operate only when ignition is switched on.  
S
switch A lights up.  
Opening a window  
WARNING  
A window is opened by pressing lightly on the respective button in the  
door. The process stops when one releases the button.  
If you lock the vehicle from the outside, do not leave any person in the  
vehicle since it is no longer possible to open the windows from the inside in  
an emergency.  
Additionally you can open the window automatically (fully opened) by  
pressing the button up to the stop. Renewed pressing of the button  
causes the window to stop immediately.  
The system is fitted with a force limiter page 53. If there is an obstacle,  
the closing process is stopped and the window goes down by several centim-  
eters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
Closing a window  
A window is closed through pulling lightly on the respective button in  
the door. The closing process stops when one releases the button.  
It is recommended to deactivate the electrically operated power  
windows in the rear doors (safety pushbutton) Afig. 48 when children  
S
are being transported on the rear seats.  
Unlocking and locking 53  
Closing a window  
Note  
Lightly press the appropriate button up and hold it until the window  
After switching the ignition off, it is still possible to open or close the windows  
has moved into the desired position.  
for a further 10 minutes. The automatic closing and opening functions will not  
operate during this time. The power windows are switched off completely once you  
open the driver or front passenger door.  
Additionally you can close the window automatically (fully closed) by  
pressing the button up up to the stop. Renewed pressing of the button  
causes the window to stop immediately.  
When driving always use the existing heating, air conditioning and ventilation  
system for ventilating the interior of the vehicle. If the windows are opened, dust as  
well as other dirt can get into the vehicle and in addition the wind noise is more at  
certain speeds.  
WARNING  
The system is fitted with a force limiter page 53. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
ters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
Button in front passenger door and in rear doors  
Note  
After switching the ignition off, it is still possible to open or close the windows  
for a further 10 minutes. The automatic closing and opening functions will not  
operate during this time. The power windows are switched off completely once you  
open the driver or front passenger door.  
Fig. 49 Position of button in  
front passenger door  
Force limiter of the power windows  
The electrically operated power windows are fitted with a force limiter. It reduces  
the risk of bruises or injuries when closing the windows.  
A button for the relevant window is provided in these doors.  
Opening a window  
If there is an obstacle, the closing process is stopped and the window goes down by  
several centimeters.  
Lightly press the appropriate button down and hold it until the  
window has moved into the desired position.  
If the obstacle prevents the window from being closed during the next 10 seconds,  
the closing process is interrupted once again and the window goes down by several  
centimeters.  
Additionally you can open the window automatically (fully opened) by  
pressing the button down up to the stop. Renewed pressing of the  
button causes the window to stop immediately.  
You must try to close the window once again within 10 seconds after the window  
has gone down twice, even if the obstacle was not yet removed, the closing process  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
54 Unlocking and locking  
is stopped. During this time it is not possible to automatically close the window. The  
force limiter is still switched on.  
WARNING  
The system is fitted with a force limiter page 53. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
ters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
The force limiter is only switched off, if you attempt to close the window within the  
next 10 seconds - the window closes now with full strength!  
If you wait longer than 10 seconds, the force limiter is switched on again.  
WARNING  
You should take particular care when closing the windows! You may other-  
wise suffer severe injuries as a result of getting an arm, for example, jammed  
in the window!  
Note  
On vehicles fitted with anti-theft alarm system the convenience window  
opening is possible by means of the key in the locking cylinder only 45 seconds  
after deactivating the warning system or after activating the anti-theft alarm  
system.  
Window convenience operation  
You can open and close the electrically powered windows as follows  
when unlocking and locking the vehicle (only close the sliding/tilting  
roof).  
Operational faults  
Electrically operated power windows do not operate  
If the battery of the car has been disconnected and then reconnected, the electri-  
cally operated power windows do not operate. The system must be activated.  
Proceed as follows in order to re-establish the function:  
Opening a window  
Hold the key in the locking cylinder of the driver's door in the unlock  
position or press the unlock button of the radio remote control until  
all the windows are opened.  
Switch on the ignition.  
Press the relevant switch top and hold it pressed as long as necessary until the  
window is closed.  
Closing a window  
Release the switch.  
Hold the key in the locking cylinder of the driver's door in the lock  
position or press the lock button of the radio remote control until all  
the windows are closed.  
Press once again the relevant switch top and hold it pressed for approx. 3  
seconds.  
Operation in winter  
You can interrupt the opening or closing operation of the windows immediately by  
releasing the key or the lock button.  
Ice accumulating on the surface of the windows during the winter may result in a  
greater resistance when closing the windows and the window may stop and go  
down several centimetres  
It is necessary to put the force limiter out of operation in order to close the window  
page 53, “Force limiter of the power windows”.  
Unlocking and locking 55  
The sliding/tilting roof with electric sun screen can only be operated with the  
WARNING  
control dial when the ignition is switched on fig. 50. The control dial has a  
number of positions.  
The system is fitted with a force limiter page 53. If there is an obstacle, the  
closing process is stopped and the window goes down by several centime-  
ters. You should then take particular care when closing the windows! You  
may otherwise suffer severe injuries as a result of getting an arm, for  
example, jammed in the window!  
You can open or close the electric sun screen separately with the aid of the buttons  
fig. 51.  
After switching the ignition off, it is still possible to open, close and tilt the  
sliding/tilting roof or the electric sun screen for approx. 10 minutes. It is no longer  
possible to operate the sliding/tilting roof and the electric sun screen after opening  
one of the front doors, however.  
Electric sliding/tilting roof with electric sun screen*  
Note  
Description  
The sliding/tilting roof must be initialised after disconnecting and reconnecting the  
vehicle battery. The initialisation is performed by holding the switch for approx. 10  
A
seconds in the position A in order to close the sliding/tilting roof.  
Opening and tilting  
Comfort position  
C
Turn the switch to position A fig. 50.  
Fig. 50 Control dial for the  
power sliding/tilting roof  
Opening fully  
Turn the switch to position A and hold it in this position (spring-  
tensioned position).  
B
Tilting and closing  
Pull up the rear switch fig. 50.  
Press down the switch on the recess and then push it forward in order  
to close the sliding/tilting roof.  
The wind noise in the comfort position is less than when the roof is fully opened.  
Fig. 51 Buttons for the elec-  
tric sun screen  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
56 Unlocking and locking  
The sun screen is also opened automatically when the roof slides open. You can  
electrically open and close the sun screen separately, even when the sliding/tilting  
roof is closed.  
Note  
The force limiter also operates for convenience closing.  
Caution  
Emergency operation  
It may be necessary during winter to remove any ice and snow in the area of the  
sliding/tilting roof before opening it in order to prevent damaging the opening  
mechanism.  
Closing  
Sliding closed/closing the sliding/tilting roof  
A
Turn the switch to position A page 55, fig. 50.  
Fig. 52 Detail of the head-  
liner: Points for positioning  
screwdriver  
Safety closing  
The sliding/tilting roof is fitted with a force limiter. The sliding/tilting roof stops and  
moves back several centimetres when it cannot be closed because there is some-  
thing in the way (e.g. ice). You can close the sliding/tilting roof completely without  
A
force limiter by pressing the switch to the Aposition page 55, fig. 50 at the front  
for as long as it takes for the sliding/tilting roof to close completely ⇒  
.
WARNING  
Close the sliding/tilting roof carefully - risk of injury!  
Fig. 53 Detail of the head-  
liner: Emergency operation  
Convenience operation  
You can also close an open sliding/tilting roof from the outside.  
You can close and/or open the sliding/tilting roof by hand if the system is  
defect.  
Hold the key in the locking cylinder of the driver's door in the lock  
position or press the lock button of the remote control until the  
sliding/tilting roof is closed.  
Position the flat blade of a screwdriver carefully against the rear edge  
of the cover of the electrical drive fig. 52.  
The closing operation stops when one releases the key or the lock button.  
Pull the cover down.  
Unlocking and locking 57  
Insert an Allen key, Group 4, up to the stop into the opening and close  
and/or open the sliding/tilting roof page 56, fig. 53.  
Press on the cover again by first of all inserting the plastic lugs and  
then pushing the cover up.  
Have the fault rectified by a specialist workshop.  
Note  
It is necessary after each emergency operation to initialise the sliding/tilting roof.  
The initialisation is performed by holding the switch for approx. 10 seconds in the  
A
position A page 55, fig. 50 in order to close the sliding/tilting roof.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
58 Lights and Visibility  
Lights and Visibility  
On models fitted with right-hand steering the position of certain switches differs  
from that shown in fig. 54. The symbols which mark the switch positions are  
identical, however.  
Lights  
Switching lights on and off   
WARNING  
Never drive with side lights on - risk of accident! The side lights are not  
bright enough to light up the road sufficiently in front of you or to be seen by  
other oncoming traffic. In this case, always switch on the low beam when it  
is dark or if visibility is poor.  
Note  
An audible warning will sound if you withdraw the ignition key and open the  
driver's door when the vehicle lights are still on.  
The acoustic warning signal is switched off over the door contact when the  
Fig. 54 Dash panel: Light  
switch  
driver's door is closed (ignition off). The vehicle can be parked with the side lights  
on.  
Switching on side lights  
Turn the light switch into position .  
If the car is parked for a lengthy period, we recommend switching off all lights,  
or leaving only the parking lights switched on.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
Switching on the low beam and main beam  
Turn the light switch into position .  
If a fault occurs in the light switch, the low beam comes on automatically  
In the event of cool or humid weather conditions, the headlights can be misted  
Press the main beam lever forward in order to switch on the main  
beam page 64, fig. 60.  
up from inside.  
The temperature difference between interior and external area of the head-  
Switching off lights (except daylight driving lights)  
Turn the light switch into position°0.  
light lenses is decisive.  
When the driving lights are switched on, the light outlet surfaces are free  
from mist after a short period. The headlight lenses can possibly mist up at the  
border areas.  
Low beam comes on only if the ignition is switched on. After switching off the igni-  
tion, the low beam is switched off automatically and only the side lights come on.  
For vehicles which are equipped with the function Coming/Leaving-Home*  
page 60, the side lights also go out.  
It also concerns reverse light and turn signal lights.  
This mist has no influence on the life of the lighting system.  
Lights and Visibility 59  
Daylight driving lights  
Automatic light control*  
In some countries, the national legislation requires that the vehicles are  
equipped with the function daylight driving lights.  
Switching on daylight driving lights  
Switch on the ignition without turning the light switch out of the posi-  
tion 0.  
Deactivate function daylight driving lights  
Fig. 55 Dash panel: Light  
switch  
Pull the turn signal light lever towards the steering wheel up to 3  
seconds after switching on the ignition and at the same time, slide it to  
the bottom and hold it in this position for at least 3 seconds.  
Switching on automatic light control*  
Activate function daylight driving lights  
Turn the light switch fig. 55 into position .  
Pull the turn signal light lever towards the steering wheel up to 3  
seconds after switching on the ignition and at the same time, slide it to  
the top and hold it in this position for at least 3 seconds.  
Switching off automatic light control*  
Turn the light switch to the position 0, or .  
When the daylight driving lights are switched on, the side lights and the low beam  
come on together.  
If the light switch is in the position , the symbol illuminates when the ignition  
is switched on  next to the light switch. If the low beam is activated with the  
light sensor, the symbol illuminates additionally next to the light switch.  
On vehicles which are fitted with bulbs for daylight driving lights in the fog lights,  
the parking lights do not come on when activating the function daylight driving  
lights.  
If the light comes on automatically, the side lights and low beam as well as licence  
plate light light up at the same time.  
When the daylight driving lights are switched on, the illumination of the instrument  
cluster is switched off, however, it is switched on in the position when it is dark  
and the low beam shines with full brightness (100 % of the performance).  
If the automatic light control is switched on, the light is regulated with the light  
sensor in the rear mirror holder. If the light intensity drops below the set value, e.g  
when driving during the day into a tunnel, the low beam and the side lights as well  
as the licence plate light come on automatically. If the light intensity increases  
again, the lights switch off automatically.  
On vehicles fitted with an information display*, you can activate or deactivate in the  
menu the function daylight driving lights:  
„
„
Setup  
Motorway lights  
Lights & Vision (Lights & Vision)  
If the automatic light control has been switched on and the vehicle speed is over  
140 km/h for at least 10 seconds, the side lights and low beam are switched on  
automatically.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
60 Lights and Visibility  
If the vehicle speed is below 65 km/h for at least 2 minutes, the lights are switched  
off.  
WARNING  
If the cornering lights are defective, the headlights are automatically  
lowered to the emergency position, which prevents a possible dazzling of  
oncoming traffic. Thus the illuminated length of the road is shortened. Drive  
carefully and have the car inspected immediately by a specialist garage.  
Rain lights  
If you switch on the windscreen wipe in the operation rain sensor* for longer than  
10 seconds or in the operation permanent wipe (position 2 or 3) page 69  
switching on for longer than 15 seconds, the side lights and low beam are switched  
on automatically. The light switches off if the windscreen wipe is in operation rain  
sensor* for more than 4 minutes or is not switched on in the operation permanent  
wipe.  
Coming Home Function  
The function makes it possible to switch on the lights in the darkness for  
a short time after leaving the vehicle.  
WARNING  
The automatic light control only operates as a support. The driver is not  
released from his responsibility to inspect the light and if necessary to switch  
on the light depending on the light conditions. The light sensor cannot  
detect for example rain or snow. For these conditions we recommend to  
switch on the low beam !  
Switching on Coming Home Function  
The light switch is in the position automatic driving lamp control   
and the low beam illuminates.  
Switch off the ignition.  
After opening the driver's door, the function Coming Home is  
switched on.  
Note  
Do not affix any stickers in front of the light sensor, so that you do not impair its  
function or put it out of operation.  
The same principles as for using the automatic light control also apply to the  
Close all the doors and the boot lid and lock the vehicle. After a short  
time, switch all lights off.  
light which is switched on manually page 58.  
Depending on equipment fitted the function Coming Home switches on the  
following lights:  
Cornering lights*  
Parking lights,  
Low beam,  
The cornering lights are used to illuminate the curves by means of the cone of light  
swiveling together with the front headlight with Xenon lights*. This function is  
active when the speed of the car increases to more than 10km/h.  
Entry lighting in the exterior mirrors,  
Licence plate light.  
The swiveling function of the headlights can be switched off / on via the menu point  
Assistant in the main menu of the Information display* page 27.  
Coming Home Function  
The lights go out 10 seconds after closing all the doors and the boot lid.  
If a door or the boot lid remains open, the lights go out 60 seconds after switching  
off the ignition.  
Lights and Visibility 61  
The function Coming Home is controlled with the light sensor in the mount of the  
interior rear mirror. If the light intensity is higher than the set value of the light  
sensor, the Coming Home Function is not switched on after switching off the igni-  
tion.  
After unlocking the vehicle with the radio remote control, the lights come on for 10  
seconds. The Leaving Home Function is also switched off after the ignition is  
switched on and after locking the vehicle.  
If no door is opened within 30 seconds, the lights go out and the vehicle is locked  
automatically.  
Note  
If the Coming Home Function is switched on constantly, the battery will be  
heavily discharged particularly in short-haul traffic.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
You can change the illumination period for the Coming Home Function by  
Note  
If the Leaving Home Function is switched on constantly, the battery will be  
heavily discharged particularly in short-haul traffic.  
The switching on of the described lights should only be undertaken in accord-  
ance with the legal requirements.  
You can change the illumination period for the Leaving Home Function by  
means of the information display*.  
means of the information display*.  
Leaving Home Function  
Tourist light*  
This function makes it possible to switch on the lights when approaching  
the vehicle.  
This mode makes it possible to drive in countries with opposing traffic system,  
driving on the left/right, without dazzling the oncoming vehicles. When the mode  
“tourist light” is active, the side to side swivel of the headlights is deactivated.  
Switching on Leaving Home Function  
Unlock the vehicle with the radio remote control - the lights come on.  
The mode “tourist light” is activated / deactivated via the information display* in the  
menu:  
Depending on equipment fitted the function Leaving Home switches on the  
following lights:  
„
„
SETUP (Settings)  
Travel mode  
Parking lights,  
„
Off  
On  
Low beam,  
„
Entry lighting in the exterior mirrors,  
Licence plate light.  
Leaving Home Function  
The function Leaving Home is controlled with the light sensor in the mount of the  
interior rear mirror. If the light intensity is higher than the set value of the light  
sensor, the Leaving Home Function is not switched on after unlocking the vehicle  
with the radio remote control.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
62 Lights and Visibility  
the low beam is switched on or the light switch is in the position  and the  
intensity of the ambient light causes the low beam to be switched on;  
Fog lights*   
the fog lights are not switched on;  
no reverse gear is engaged.  
Note  
If you engage the reverse gear during the active function “Corner”, both fog lights  
illuminate.  
Fig. 56 Dash panel: Light  
switch  
Rear fog light   
Switching on the rear fog light  
Switching on the fog lights  
First of all turn the light switch into position or fig. 56.  
First of all turn the light switch into position or fig. 56.  
2
Pull the switch into position A.  
1
Pull the light switch into position A.  
The rear fog light warning light page 32 lights up in the instrument cluster  
when the fog light is switched off.  
The rear fog light warning light page 32 lights up in the instrument cluster  
when the fog light is switched off.  
Only the rear fog light of the trailer lights up automatically when you are towing a  
trailer using a factory-fitted towing device which is fitted with the rear fog light.  
The rear fog light is located in the rear light array on the driver's side.  
Fog lights with the function “Corner”*  
The fog lights with the function “Corner” improve the illumination of  
areas close to the vehicle when turning, parking etc.  
Caution  
The rear fog light should only be switched on if visibility is particularly poor  
(conform with any varying legal provisions) to avoid dazzling vehicles behind your  
vehicle.  
The fog lights with the function “Corner” are regulated according to the steering  
7)  
angle or after switching on the turn signal light in the following circumstances:  
the vehicle is stationary and the engine is running or it moves with a speed of  
maximum 40 km/h;  
the daylight driving lights are not switched on;  
7)  
If both switch on versions are conflicting, for example if the steering wheel is turned to the  
left and the right turn signal light is switched on, the turn signal light has the higher priority.  
Lights and Visibility 63  
Instrument lighting*   
Headlamp range adjustment   
You can adjust the brightness of the instrument lighting.  
Once the low beam is switched on you can then adapt the range of  
the headlights to the load of the vehicle.  
Fig. 57 Dash panel: Instru-  
ment lighting  
Fig. 58 Dash panel: Lights  
and Visibility  
Instrument lighting  
Turn the control dial fig. 58 until you have adjusted the low beam  
so that oncoming traffic is not dazzled.  
Switch on the light.  
Turn the control dial fig. 57 to the desired intensity of the instru-  
Settings  
ment lighting.  
The positions correspond approximately to the following vehicle loads:  
For the information display* page 26 the intensity of the lighting is automatically  
set. It is only possible to adjust the instrument lighting with the control dial if the  
light intensity drops below the set value of the light sensor.  
-
A Front seats occupied, luggage compartment empty.  
1
A All seats occupied, luggage compartment empty.  
2
A All seats occupied, luggage compartment laden.  
3
A Driver seat occupied, luggage compartment laden.  
Caution  
Set the headlight beam adjustment in such a way as to avoid dazzling oncoming  
traffic.  
Note  
Headlights fitted with Xenon bulbs* adapt automatically to the load and driving  
state of the vehicle (e.g. accelerating, braking) when the ignition is switched on and  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
64 Lights and Visibility  
when driving. Vehicles which are equipped with Xenon bulbs* do not have a  
manual headlight range adjustment control.  
The turn signal   and main beam lever   
The parking lights and headlight flasher are also switched on and off  
using the turn signal and main beam lever.  
Switch for hazard warning lights   
Fig. 60 Turn signal and main  
beam lever  
Fig. 59 Dash panel: Switch  
for hazard warning lights  
The turn signal and main beam lever perform the following functions:  
Press switch fig. 59 to switch the hazard warning light system on  
or off.  
Right and left turn signal light  
Push the lever upwards or downwards fig. 60.  
All the turn signal lights on the vehicle flash at the same time when the hazard  
warning light system is switched on. The indicator light for the turn signals and the  
indicator light in the switch also flash at the same time. You can also switch on the  
hazard warning light system if the ignition is switched off.  
If you only wish to flash three times* (the so-called convenience turn  
signal), push the lever briefly up to the upper or lower pressure point  
and release it. This function can be activated/deactivated in the infor-  
mation display* page 26.  
The hazard warning light system is switched on automatically if an airbag is  
deployed in the event of an accident.  
Turn signal for changing lanes - in order to only flash briefly, move the  
lever up or down to the pressure point and hold it in this position.  
Please comply with any legal requirements when using the hazard warning light  
system.  
Main beam   
Switch on the low beam.  
Push the lever forwards.  
Note  
Switch on the hazard warning light system if, for example:  
you encounter traffic congestion,  
Pull the lever back into the initial position in order to switch the main  
beam off again.  
your vehicle breaks down or an emergency situation occurs.  
Lights and Visibility 65  
Headlight flasher   
Interior lighting  
Pull on the lever of the steering wheel (sprung position) - the main  
beam and warning light in the instrument cluster come on.  
Vehicle interior lighting in the front and lighting of storage  
compartment on front passenger side  
Parking light   
Switch off the ignition.  
Push the lever up or down - the right-hand or left-hand parking light  
is switched on.  
Information concerning the function of the lights.  
The turn signal system only operates when the ignition is switched on. The  
corresponding indicator light or in the instrument cluster also flashes.  
The turn signal is automatically cancelled after negotiating a curve.  
Fig. 61 Detail of the head-  
liner: Front reading lights  
The indicator light flashes at twice its normal rate if a bulb of the turn signal light  
fails.  
The side light and rear light on the appropriate side of the vehicle are switched  
on when the parking light is selected. The parking light only operates if the ignition  
is switched off.  
Caution  
Use main beam or the headlight flasher only if this does not risk dazzling other road  
users.  
Fig. 62 Detail of the head-  
liner: Front reading lights  
with integrated interior  
monitor  
Note  
If you have switched on the right or left turn signal light and you switch off the  
ignition, the parking light is not automatically switched on.  
Use only in accordance with the legal requirements the described lighting and  
signal systems.  
Switching the interior light on  
Press the switch at the point of the symbol fig. 61 or fig. 62. If  
an illumination unit with integrated interior monitor is installed, no  
symbol is present.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
66 Lights and Visibility  
Switching the interior light off  
Front reading lights  
Press the switch at the point of the symbol O.  
Door contact setting  
Position the switch into middle position. On vehicles without interior  
monitor*, the middle position is marked with a symbol page 65,  
fig. 61.  
Lighting of storage compartment on the front passenger side  
When opening the flap of the storage compartment on the front  
passenger side the lighting in the storage compartment comes on.  
Fig. 63 Detail of the head-  
liner: Front reading lights  
The light switches on automatically when the parking light is switched  
on and goes out when the flap is closed.  
The interior light comes on as soon as you unlock the car or open a door or when  
the ignition key has been removed. The light goes out again about 30 seconds after  
all the doors have been closed. The interior lighting is switched off when you lock  
the car or switch the ignition on. This only applies when the switch for the corre-  
sponding interior lights is standing n the door contact setting.  
Fig. 64 Detail of the head-  
liner: Front reading lights  
with integrated interior  
monitor  
The interior lighting goes off after about 10 minutes when a door has been left open  
in order to avoid discharging the battery of the vehicle.  
If the switch is in the position (permanent lights), the interior lighting goes off at  
the latest after 10 minutes in order to avoid discharging the battery of the vehicle.  
Front reading lights  
You switch on or off the reading light on the right or left by pressing the  
switch fig. 63 or fig. 64.  
Two diffuse lights* are integrated in the interior lighting, which illuminates the shift  
lever and the middle of the dash panel. They are switched on automatically when  
switching on the parking light.  
On vehicles with interior monitor, the illumination unit does not have any diffuse  
lights*.  
Note  
We recommend having these bulbs replaced by a specialist garage.  
Lights and Visibility 67  
Rear reading lights  
Front door warning light*  
Fig. 65 Detail of the head-  
liner: Rear reading lights  
Fig. 66 Front door: Warning  
light  
The warning light is located in the door trim panel below fig. 66.  
Switching the interior light on  
The warning light goes on every time the door is opened. The light goes out about  
10 minutes after opening the door in order to avoid discharging the battery of the  
vehicle.  
Press the cover glass in the area of the symbol fig. 65.  
Switching the interior light off  
Press the cover glass in the area of the symbol O fig. 65.  
There is a reflector installed on some vehicles instead of the warning light.  
Door contact setting  
Luggage compartment light*  
Position the cover glass into middle position .  
The lighting comes on automatically when the boot lid is opened. The luggage  
compartment lighting will switch off again automatically if the boot lid remains  
open for more than about 30 minutes.  
Entry lighting*  
The lighting is positioned on the bottom edge of the exterior mirror.  
The light beam is directed towards the entry area of the front door.  
The light comes on after the doors have been locked or on opening the boot lid. The  
light goes out after switching on the ignition or up to 30 seconds after closing all the  
doors, the bonnet and the boot lid.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
68 Lights and Visibility  
If a door, the bonnet or the boot lid remains open, the light goes out within 2  
minutes if the ignition is switched off.  
Note  
The position and the shape of the switch can differ depending on equipment  
installed in the vehicle.  
WARNING  
If the on-board voltage drops, the rear window heater is switched off automat-  
ically, in order to provide sufficient electrical energy for the engine control.  
If the entry light comes on, do not touch its cover - risk of burns!  
Sun visors  
Visibility  
Rear window heater  
Fig. 68 Sun visor: swivelling  
out  
Fig. 67 Switch for rear  
window heater  
You can switch the rear window heater on or off by pressing the switch  
fig. 67 - the indicator light in the switch comes on or goes out.  
The rear window heater only operates when the engine is running.  
The rear window heater switches off automatically after 10 minutes.  
Fig. 69 Double sun visor  
For the sake of the environment  
As soon as the window is de-iced or free from mist, the heating should be switched  
off. The reduced current consumption will have a favourable effect on fuel  
economy page 191, “Saving electricity”.  
You can pull the sun visor for the driver or front passenger out of the fixture and  
1
swivel it toward the door in the direction of the arrow A fig. 68.  
Lights and Visibility 69  
The vanity mirrors* in the sun visors are provided with covers. Push the cover in  
Finger-operated wiping  
2
direction of arrow A.  
If you wish to wipe the windscreen only briefly, push the lever into the  
On vehicles which are equipped with double sun visor*, you can also unfold the  
auxiliary visor after swivelling the sun visorpage 68, fig. 69.  
4
sprung position A. If you hold the lever in the lower position for more  
than 1 second, the wiper wipes faster.  
Intermittent wiping  
WARNING  
1
Position the lever up into position A.  
The sun visors must not be swivelled to the side windows into the deploy-  
ment area of the head airbags if any objects, such as ball-point pens etc. are  
attached to them. This might result in injuries to the occupants if the head  
airbag is deployed.  
A
Set with the switch Athe desired break between the individual wiper  
strokes  
Slow wipe  
Position the lever up into position A.  
2
Windshield wiper and wash system  
Fast wipe  
Position the lever up into position A.  
Windshield wiper  
3
You can operate the windscreen wipers and automatic wipe/wash  
using the windscreen wiper lever.  
Automatic wipe/wash for windscreen  
5
Pull the lever towards the steering wheel into sprung position A, the  
wash system sprays immediately, the windscreen wiper starts wiping  
a little later. The wash system and the windscreen wiper operate  
simultaneously at a speed of more than 120 km/h.  
Release the lever. The windscreen wash system stops and the wiper  
continues for another 3 - 4 wiper strokes (depending on the period of  
spraying of the windscreen). At a speed of more than 2 km/h, the wiper  
wipes once again* 5 seconds after the last wiper stroke in order to  
wipe the last drops from the windscreen. This function can be acti-  
vated/deactivated by a specialist garage.  
Fig. 70 Windscreen wiper  
lever  
Rain sensor*  
The windscreen wiper lever fig. 70 has the following positions:  
1
Move the lever into position A.  
A
You can set the sensitivity of the sensor individually with switch A.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
70 Lights and Visibility  
Top up with wash liquid page 230.  
Wiping the rear window pane  
6
Push the lever away from the steering wheel into position A - the  
Winter position  
widescreen wiper will operate every 6 seconds.  
If the windscreen wipers are in rest position, they cannot be folded out from the  
windscreen. For this reason we recommend adjusting the windscreen wipers in  
winter so that they can be folded out from the windscreen easily. You can set this  
rest position as follows:  
Automatic wipe/wash for the rear window pane*  
Press the lever from the steering wheel forward into the sprung posi-  
7
tion A, the wash system sprays immediately, the windscreen wiper  
Switch on the windscreen wipers.  
starts wiping a little later. As long as you hold the lever in this position,  
the wiper operates as well as the wash system.  
Switch off the ignition. The windscreen wipers remain in the position in which  
they were when switching off the ignition.  
Letting go of the lever will cause the windscreen wash system to stop  
and the wiper to continue for another 2 - 3 wiper strokes (depending  
on the period of spraying of the windscreen). The lever will stay in  
You can also use the service position page 72 as a winter position.  
WARNING  
6
position after releasing it A.  
Properly maintained windscreen wiper blades are essential for clear visi-  
bility and safe driving page 71.  
Do not use the windscreen washer system at low temperatures, without  
Switching windscreen wipers off  
Move the lever back into its home position A.  
0
heating the windscreen beforehand. Otherwise the window cleaner could  
freeze on the windscreen and restrict the view to the front.  
After the windscreen wiper switches off each time or the ignition switches off for  
the third time, the position of the windscreen wiper changes, this counteracts an  
early fatigue of the wiper rubbers.  
The rain sensor only operates as a support. The driver is not released  
from the responsibility to set the function of the windscreen wipers manu-  
ally depending on the visibility conditions.  
The windscreen wipers and the wash system only operate if the ignition is switched  
8)  
on and the bonnet is closed  
.
If the intermittent wipe is switched on, the intervals are also controlled depending  
on speed.  
Caution  
In frosty weather, please first of all check whether the windscreen wiper blades are  
not frozen to the windscreen before switching them on. Switching on windscreen  
wipers when the blades are frozen to the windscreen may result in damage both to  
the blades and the motor of the windscreen wipers!  
The rain sensor* automatically regulates the break between the individual wiper  
strokes depending on the intensity of the rain.  
The rear window will be wiped again if the front window wipers are on when  
reverse gear is selected.  
Note  
The windscreen washer nozzles are heated* when the ignition is switched on.  
2
3
If the slower A or the faster Awiper setting is switched on page 69, fig. 70  
and the vehicle speed decreases to below 4 km/h, the lower wiper step is switched  
on automatically. At a speed increase of more than 8 km/h the previous wiper  
setting is established again.  
8)  
On vehicles which do not have a contact switch for the bonnet, the windshield wiper and  
wash system operates also when the bonnet is opened.  
Lights and Visibility 71  
If there is an obstacle on the windscreen, the wiper will try to push away the  
Headlight cleaning system*  
obstacle. If the obstacle continues to block the wiper, the wiper stops after 5 cycles,  
in order to avoid a damage to the wiper. Remove the obstacle and and switch on  
the wiper again.  
The headlights are being cleaned after the windscreen has been sprayed for the first  
time and fifth time, the low beam or main beam are switched on and the wind-  
5
screen wiper lever was held in the position A page 69, fig. 70 for about 1  
second.  
Automatic rear window wiper*  
Activating  
The headlight washer nozzles are moved forward out of the bumper by the water  
pressure for cleaning the headlights.  
You should remove stubborn dirt (such as insect residues) from the headlight  
lenses at regular intervals, for example when refuelling. Please refer to the following  
guidelines page 210, “The headlight lenses”.  
In the information display*, select from the Main menu the menu  
point Setups.  
In the menü Setups, select the menu point Lights & Vision &.  
You should remove any snow from the fixtures of the washer nozzles and clear ice  
in winter with a de-icing spray in order to ensure proper operation of the cleaning  
system.  
In the menu Lights & Vision &, activate or deactivate the menu point  
B
Rear wiper by briefly pressing the button Apage 27, fig. 28 or by  
D
briefly pressing the button A page 27, fig. 29.  
Replacing wiper blades for the windscreen wipers  
By selecting the menu point Back you will reach one level higher.  
Using the system  
2
Move the lever into position A page 69, fig. 70. When the vehicle  
speed exceeds 5 km/h and the front window wipers continue to  
2
operate in the position A, a wiping process takes place every 30  
seconds.  
3
Move the lever into position A page 69, fig. 70. When the vehicle  
speed exceeds 5 km/h and the front window wipers continue to  
3
operate in the position A, a wiping process takes place every 10  
Fig. 71 Wiper blade for the  
windscreen wiper  
seconds.  
1
When the rain sensor* is active (the lever is in the position A) the function is only  
active if the front window wipers continue to operate (no break between each  
wiping process).  
One cannot fold out the wiper arms in the rest position from the wind-  
screen. Before replacing the wiper arms you must put them into the  
service position.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
72 Lights and Visibility  
Service position for changing wiper blades  
WARNING (continued)  
Close the bonnet.  
You should clean the wiper blades regularly with a windscreen cleaner in  
order to avoid any smears. Clean a wiper blade with a sponge or cloth if it is  
very dirty, for example from insect residues.  
Switch the ignition on and then again off.  
4
Then press the windscreen wiper lever in the position A page 69,  
fig. 70 within 10 seconds - the wiper arms move into the service posi-  
tion.  
Replace the wiper blades once or twice a year for safety reasons. The  
wiper blades are available from specialist garages.  
Taking off the wiper blade  
Replacing the wiper blade on the rear window wiper  
Fold windscreen wiper arm away from the windscreen.  
Press the locking button, in order to unlock the wiper blade and pull  
off in the direction of arrow page 71, fig. 71.  
Attaching a wiper blade  
Push the wiper blade until it locks up to the stop.  
Check whether the wiper blade is correctly attached.  
Fold the windscreen wiper arm back onto the windscreen.  
Fig. 72 Wiper blade for rear  
window  
The wiper arms move back into the rest position - after switching on the ignition  
and after changing the position of the window wiper lever or when driving at a  
speed greater than 6°km/h.  
Taking off the wiper blade  
Wiper blades in proper condition are essential to obtain good visibility. Wiper  
blades should not be allowed to become dirtied by dust, insect remains and  
preserving wax.  
Fold windscreen wiper arm away from the windscreen.  
Press the locking button, in order to unlock the wiper blade and pull  
off in the direction of arrow fig. 72.  
Juddering or smearing of the wiper blades could then be due to wax residues left  
on the windscreen by vehicle washing in automatic vehicle wash systems. It is  
therefore important to degrease the lips of the wiper blades after every pass  
through an automatic vehicle wash system.  
Attaching a wiper blade  
Push the wiper blade until it locks up to the stop.  
Check whether the wiper blade is correctly attached.  
Fold the windscreen wiper arm back onto the windscreen.  
WARNING  
If the windscreen wipers are handled carelessly, there is a risk of damage  
to the windscreen.  
The same remarks apply here as for page 71.  
Lights and Visibility 73  
Rear-view mirror  
Note  
Do not affix any stickers in front of the light sensor, so that you do not impair the  
automatic dimming function or put it out of operation.  
If you switch off the automatic dimming interior rear-view mirror, also the exte-  
Manual dimming interior rear-view mirror  
Basic setting  
rior mirror dimming is switched off.  
Pull the lever on the bottom edge of the mirror forward.  
Exterior mirror  
Dimming mirror  
Pull the lever on the bottom edge of the mirror back.  
You can adjust the exterior mirrors electrically.  
Automatic dimming interior mirror*  
Fig. 74 Inner part of door:  
Rotary knob  
Fig. 73 Automatic dimming  
interior mirror  
The exterior mirror heater* only operates when the engine is running and  
up to an outside temperature of +20°C.  
Heating of the external mirror*  
Switching on the automatic dimming  
B
A
Turn the rotary knob to position fig. 74.  
Press the button A - the warning light lights up A fig. 73.  
Adjusting left and right exterior mirrors simultaneously  
Switching off the automatic dimming  
B
A
Turn the rotary knob to position . The movement of the mirror surface  
is identical to the movement of the rotary knob.  
Press again the button A - the warning light goes out A.  
If the automatic dimming is switched on, the mirror dims automatically  
depending on the light striking the mirror from the rear. The mirror has no lever on  
the bottom edge of the mirror. When the interior lights are switched on or the  
reverse gear is engaged, the mirror always moves back into the basic position.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
74 Lights and Visibility  
Adjusting the right-hand exterior mirror  
Automatic dimming exterior mirror*  
Turn the rotary knob to position . The movement of the mirror  
surface is identical to the movement of the rotary knob.  
The exterior mirrors are dimmed together with the interior mirror. If the automatic  
dimming is switched on, the mirror dims automatically depending on the light  
striking the mirror from the rear.  
Switching off operating control  
Turn the rotary knob to position .  
When the interior lights are switched on or the reverse gear is engaged, the mirror  
always moves back into the basic position (not dimmed).  
Tilting surface of front passenger exterior mirror*  
When the rotary knob is in position page 73, fig. 74 and the reverse gear is  
engaged, the surface of the mirror tilts down slightly. This provides an aid in seeing  
the kerb of the pavement when parking the car.  
Note  
Automatic mirror dimming operates only properly if the sun screen* for the rear  
window is not in use or the light striking the rear of the interior rear-view mirror is  
not affected by other objects.  
The mirror returns into its initial position, after the rotary knob is moved out of the  
position and put into another position or if the speed is more than 15 km/h.  
Do not affix any stickers in front of the light sensor, so that you do not impair the  
automatic dimming function or put it out of operation.  
If you switch off the automatic dimming interior rear-view mirror, also the exte-  
rior mirror dimming is switched off.  
Memory for exterior mirrors*  
On vehicles fitted with a memory for the driver seat, the relevant setting of the exte-  
rior mirror is also stored automatically when the seat position is stored page 76.  
WARNING  
Convex (curved outward) or spherical (differently curved) exterior  
mirrors increase the vision field. They do, however, make objects appear  
smaller in the mirror. These mirrors are only of limited use, therefore, for  
estimating distances to the following vehicles.  
Use whenever possible the interior rear mirror, for estimating the  
distances to the following vehicles.  
Note  
Do not touch the surfaces of the exterior mirrors if the exterior mirror heater is  
switched on.  
You can set the exterior mirrors by hand, if the power setting function fails at any  
time by pressing on the edge of the mirror surface.  
Contact your specialist garage if a fault exists with the power setting of the exte-  
rior mirrors.  
Seats and Stowage 75  
Seats and Stowage  
Front seats  
WARNING (continued)  
minimum distance will mean that the airbag system will not be able to prop-  
erly protect you - hazard! The front seats and the head restraints must  
always also be correctly adjusted to match the body size of the occupant.  
Basic information  
The front seats have a wide range of different settings and can thus be matched to  
the physical characteristics of the driver and front passenger. Correct adjustment of  
the seats is particularly important for:  
Ensure that there are no objects in the footwell as any objects may get  
behind the pedals during a driving or braking manoeuvre. You would then  
no longer be able to operate the clutch, to brake or accelerate.  
safely and quickly reaching the controls;  
a relaxed, fatigue-free body position;  
Adjusting the front seats  
achieving the maximum protection offered by the seat belts and the airbag  
system.  
WARNING  
Never transport more occupants than the maximum seating in the  
vehicle.  
Each occupant must correctly fasten the seat belt belonging to the seat.  
Children must be fastened page 169, “Transporting children safely” with  
a suitable restraint system.  
The front seats and the head restraints must always be adjusted to match  
Fig. 75 Controls at seat  
the body size of the seat occupant as well as the seat belts must always be  
correctly fastened in order to provide an optimal protection for you and your  
occupants.  
Adjusting a seat in a forward/back direction  
Always keep your feet in the footwell when the vehicle is being driven -  
1
Pull the lever A fig. 75 up and push the seat into the desired posi-  
never place your feet on the instrument panel, out of the window or on the  
surfaces of the seats. This is particularly important for the front seat  
passenger. You will be exposed to increased risk of injury if it becomes  
necessary to apply the brake or in the event of an accident. If an airbag is  
deployed, you may suffer fatal injuries when adopting an incorrect seated  
position!  
tion.  
1
Release the lever A and push the seat further until the lock is heard  
to engage.  
Adjusting height of seat  
It is important for the driver and front passenger to maintain a distance  
of at least 25 cm from the steering wheel or dash panel. Not maintaining this  
2
Lift the seat if required by pulling or pumping lever A upwards.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
76 Seats and Stowage  
2
Lower the seat if required by pushing or pumping lever A down-  
Adjusting front seats electrically*  
wards.  
Adjusting seats  
Adjust the angle of the seat backrest  
Relieve any pressure on the seat backrest (do not lean on it) and turn  
3
the handwheel Apage 75, fig. 75 to adjust the desired angle of the  
backrest.  
Adjusting lumbar support*  
4
Pull on the lever Auntil you have set the most comfortable curvature  
of the seat upholstery in the area of your spine.  
The driver's seat should be adjusted in such a way that the pedals can be fully  
pressed to the floor with slightly bent legs.  
Fig. 76 Side view: Controls  
for adjusting the seat  
The seat backrest on the driver's seat should be adjusted in such a way that the  
upper point of the steering wheel can be easily reached with slightly bent arms.  
WARNING  
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Take care when adjusting the seat! Adjusting the seat without care can  
lead to bruises or injuries.  
The seat backrests must not be angled too far back when driving other-  
wise this will affect proper operation of the seat belts and of the airbag  
system - risk of injury!  
Fig. 77 Side view: Seat  
setting switch  
Adopt the correct seated position before setting page 75.  
Adjusting a seat in a forward/back direction  
B
1
Press the switch A fig. 76 forwards or backwards A fig. 77.  
Set the height of the seat  
B
Press the switch A fig. 76 upwards or downwards.  
Seats and Stowage 77  
Adjust the angle of the seat  
Note  
B
2
Press the switch A at the front A page 76, fig. 77 or at the back  
If the movement of the seat is inadvertently interrupted during an adjustment, once  
again press the switch in the appropriate direction and continue with the adjust-  
ment of the seat to the end.  
3
A page 76, fig. 77.  
Adjusting the seat backrest  
C
Press the switch A page 76, fig. 76 in the direction of the desired  
Storing setting  
setting.  
Adjusting lumbar support  
A
Press the switch A front page 76, fig. 76 in order to enlarge the  
curvature of the lumbar support.  
A
Press the switch Arear in order to reduce the curvature of the lumbar  
support.  
A
Press the switch Atop in order to adjust the curvature of the lumbar  
support higher.  
Fig. 78 Driver seat: Memory  
buttons and SET button  
A
Press the switch A bottom in order to adjust the curvature of the  
lumbar support lower.  
Storing seat and exterior mirror settings for driving forward  
B
Switch Ais operated in order to move the seat up/down and forward/back, while  
C
Switch on the ignition.  
switch A is operated in order to move the backrest forward or back.  
Adjust the seat page 76.  
WARNING  
Adjust both exterior mirrors page 73.  
Only adjust the driver seat when the vehicle is stationary - risk of injury!  
Caution when adjusting the seat! You may suffer injuries or bruises as a  
result of adjusting the seat without paying proper attention.  
A
Press button SET A fig. 78.  
B
A
Press one of the memory buttons  
the button SET - an acknowledgement signal confirms that the seat  
within 10 seconds after pressing  
In view of the fact that the seats can also be adjusted when the ignition is  
switched off (even when ignition key withdrawn), you should never leave  
children unattended in the vehicle.  
setting is stored..  
Storing exterior mirror setting for reversing*  
The seat backrests must not be angled too far back when driving other-  
wise this will affect proper operation of the seat belts and of the airbag  
system - risk of injury!  
Switch on the ignition.  
Turn the exterior mirror control to position page 73.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
78 Seats and Stowage  
Engage reverse gear.  
Press the unlock button page 11, after the successful assignment  
an audible signal will sound. The setting is stored with the memory  
button which you have selected.  
Move the right exterior mirror into the desired position page 73.  
Take the vehicle out of gear. The set position of the exterior mirror is  
stored.  
If you wish to be able to retrieve the settings which are stored in the memory by also  
using the radio remote control, you have to assign the radio remote control to a  
memory button in each case.  
Memory buttons  
Memory for the seat offers the possibility to store the individual driver seat and  
external mirror position. An individual position can be allocated to each of the three  
If you wish, you can obtain an additional remote control key from a specialist garage  
and then assign the remote control key to another memory button.  
B
memory buttons A page 77, fig. 78, that is three in total. After pressing the  
B
corresponding memory button A, the seat and the exterior mirror are automati-  
cally moved into the positions which have been allocated to this button page 78.  
Note  
If the radio remote control had previously been assigned to another memory  
button, this setting is then erased by the new assignment.  
If you assign the radio remote control to a memory button which has already  
Emergency Off  
You can interrupt the setting operation at any time, if you operate any button of the  
driver seat.  
been assigned to a radio remote control, the old assignment is also replaced by a  
new assignment in this case.  
The assignment of the radio remote control to a memory button is retained,  
however, after reassigning the seats and exterior mirrors.  
Note  
For safety reasons, it is not possible to store this position if the inclination angle  
of the seat backrest is more than 102° in relation to the seat cushion.  
When storing settings with the memory buttons, we recommend that you begin  
with the front button and assign a memory button to each additional driver.  
Retrieving settings of the seat and mirrors  
You can retrieve the stored settings either with the memory buttons  
or with the remote control*.  
Each new setting stored with the same button erases the previous setting.  
Each time you store the seat and exterior mirror settings for driving forward you  
also have to re-store the individual setting of the exterior mirror on the passenger  
side for reversing.  
Retrieving settings with memory buttons  
In order to retrieve the stored setting, you have two possibilities:  
B
Press briefly: briefly press the desired memory button Apage 77,  
Assigning remote control to the memory buttons  
fig. 78. The seat and exterior mirror are moved automatically into the  
stored positions (this applies only if the ignition is switched on and the  
speed is less than 5 km/h).  
After storing the settings of the seat and exterior mirrors, you have 10  
seconds in order to assign the radio remote control to the appropriate  
memory button.  
Press button for a long period of time: press and hold the desired  
B
memory button A pressed long enough until the seat and the exte-  
Withdraw the ignition key.  
rior mirrors are moved into the stored positions.  
Seats and Stowage 79  
Retrieving settings with remote control  
If the driver door is closed and the ignition is switched off, briefly press  
the unlock button of the radio remote control page 11 and then  
open the driver door.  
The seat and exterior mirrors now move automatically into the stored  
positions.  
Retrieving setting of exterior mirror for reversing*  
Fig. 80 Removing a head  
restraint  
Turn the rotary knob for the exterior mirror setting into the position   
page 73 before engaging the reverse gear.  
Best protection is achieved if the top edge of the head restraint is at the  
same level as the upper part of your head.  
The mirror returns into its initial position, after the rotary knob is moved out of the  
position and put into another position or if the speed is more than 15 km/h.  
Adjusting the height of a head restraint  
Emergency Off  
You can interrupt the setting operation at any time, if you operate any button of the  
driver seat.  
Grasp the side of the head restraint with both hands and push it in  
upward direction as desired fig. 79.  
Move the head restraint downwards if required by pressing and  
holding the safety button with one hand fig. 80 and by pressing  
with the other hand the head restraint downwards.  
Head restraints  
Removing and installing a head restraint  
Pull the head restraint out of the seat backrest as far as the stop.  
Press the locking button in the direction of arrow fig. 80 and pull  
the head restraint out.  
To re-insert the head restraint, push it down into the seat backrest far  
enough until you hear the locking button engage.  
Fig. 79 Adjusting head  
restraint  
The position of the front and rear outer head restraints is adjustable in height. The  
middle rear head restraint is adjustable in two positions.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
80 Seats and Stowage  
The head restraints must be adjusted to match the size of the seat occupant.  
Correctly adjusted head restraints together with the seat belts offer effective  
protection for the occupants page 148, “Correct seated position”.  
Removing and installing the rear middle head restraint  
Pull the head restraint out of the seat backrest as far as the stop.  
A
Press the locking button in the direction of arrow A, press simultane-  
B
ously the locking button into the opening A using a flat screwdriver  
WARNING  
with a width of maximum 5 mm and pull out the head restraint.  
The head restraints must be correctly adjusted in order to offer effective  
protection for the occupants in the event of an accident.  
Do not drive under any circumstance with removed head restraints - risk  
of injury!  
To re-insert the head restraint, push it down into the seat backrest far  
enough until you hear the locking button engage.  
If the rear seats are occupied, the rear head restraint must not be in the  
lower position.  
WARNING  
The head restraints must be correctly adjusted in order to offer effective  
protection for the occupants in the event of an accident.  
Do not drive under any circumstance with removed head restraints - risk  
of injury!  
Middle rear head restraint*  
If the rear seats are occupied, the rear head restraint must not be in the  
lower position.  
Rear seats  
Adjusting seats in forward/back direction  
Fig. 81 Rear seats: middle  
head restraint  
IIn certain countries national legal provisions also require the equipment  
of the rear seat with fixing eyes for child seat using the “Top Tether” system  
page 176. For vehicles, which are equipped with such fixing eyes, a  
deviating sequence for removing the middle head restraint must be  
observed.  
Fig. 82 Release at the front  
Seats and Stowage 81  
Adjusting the seat backrest  
Fig. 83 Release at the rear  
Fig. 84 Adjusting the seat  
backrest  
To enlarge the luggage compartment, the outer rear seats can be pushed  
forwards, folded fully forwards or the seats can be removed.  
Adjust the angle of the seat backrest  
Moving seats in forward/back direction  
Pull the lever fig. 84 and adjust the desired angle of the seat  
backrest.  
Pull the lever page 80, fig. 82 up or on the release loop fig. 83  
and move the seat into the desired position.  
Folding outer seats forwards  
Note  
Please refer to the following guidelines page 150, “Correct seated position for  
the occupants on the rear seats”.  
Fig. 85 Folding seat fully  
forwards  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
82 Seats and Stowage  
Note  
Please refer to the following guidelines page 148, “Correct seated position  
for the driver”.  
Removing seats  
Fig. 86 Secure folded  
forward outer seats  
Fold outer seats fully forward and secure  
Open the guide loop for the seat belt on the side of the outer seats and  
put the belt tongue into the opening of the wheel housing on the  
respective side trim panel - safety holder.  
Fig. 87 Unlocking the folded  
forward seat  
Move the seat as far as possible to the rear page 81.  
Pull the lever page 81, fig. 84 and fold the seat backrest fully  
fowards.  
Pull the lever page 81, fig. 85 up and then fold the seat fully  
forwards.  
Secure the folded forward seat with the aid of the fixing belt to a guide  
rod of the head restraint for the front seat fig. 86.  
WARNING  
Fig. 88 Carrying handle on  
the seat  
Immediately secure the folded forward seat with the aid of the fixing belt  
to a guide rod of the head restraint for the front seat - there is a risk of injury  
as soon as the vehicle starts off.  
Unlocking and removing seats  
If the seat is not in the rear end position, damage can occur to the locking  
bolts if the seat is unlocked.  
Unlock the folded forward seat by pressing the seat locks in the direc-  
tion of arrow fig. 87.  
Remove the seat with the carrying handle on the seat fig. 88.  
Seats and Stowage 83  
Move seats into the initial position  
Note  
The outer seats are not replaceable alternatively. In the rear area the left seat is  
marked with the letter L and the right seat with the letter R.  
Note  
Please refer to the following guidelines page 150, “Correct seated position for  
the occupants on the rear seats”.  
Adjusting seats in crosswise direction  
Fig. 90 Folding the seat  
backrest back into position  
Locking seats and folding back into position  
If the seat is removed, first of all position it on the guide and lock the  
seat fig. 89. Check for yourself that the seat is correctly locked by  
pulling it up.  
Fold the seat into the horizontal position until it is heard to lock. Check  
for yourself that the seat can no longer be lifted by pulling it up.  
Push the lever fig. 90 and fold the backrest back into position.  
Fig. 89 Locking the seat  
Check for yourself that the seat backrest is engaged.  
Moving seats in crosswise direction  
Take the belt tongue out of the safety holder.  
Remove the middle seat page 82.  
Close the guide loop of the seat belt on the side of the outer seats until  
it is heard to lock.  
Fold the outer seat forwards page 81 and lock it page 82, fig. 87.  
Move the folded forward and unlocked seat on the guide towards the  
middle of the vehicle up to the stop.  
WARNING  
The belt locks and the belts must be in their original position after folding  
back the seat cushions and the seat backrests - they must be ready to use.  
Lock the seat at the end of the guide fig. 89.  
The seat backrests must be securely interlocked in position so that no  
objects in the luggage compartment can slide into the passenger compart-  
ment if there is sudden braking - risk of injury!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
84 Seats and Stowage  
Seat heating of the front seats*  
WARNING (continued)  
When folding the seat backrest always make sure that it has safely locked  
into position, this is confirmed by the position and a visible marking on the  
cover of the lever.  
Note  
The seat belts of the outer seats must always be guided through the guide loops  
next to the head restraints. Otherwise the seat belts can slip behind the seat.  
Fig. 92 Dash panel: Regu-  
lator for front seat heating  
Folding table on the middle seat backrest*  
You can electrically heat the seat cushions and the seat backrests of the  
front seats.  
Front seats  
You can switch on and regulate the seat heating of the driver or front  
passenger seat by pressing the surface of the regulator at the point at  
which the symbol is located fig. 92.  
With one press, you can switch the heating to highest intensity which  
is indicated by the lighting up of the three warning lights in the switch.  
Fig. 91 Rear seats: Armrest  
With repeated pressing of the switch, the intensity of the heating is  
down-regulated up to the switch-off. The intensity of the heating is  
indicated by the number of illuminated warning lights in the switch.  
The middle seat backrest can be folded page 81, “Folding outer  
seats forwards” forwards and used as armrest or table with cup holder  
fig. 91.  
You can place two cups or beverage cans into the recesses.  
WARNING  
If, as an occupant, you have a subdued pain and/or temperature sensitivity,  
e.g. through medication, paralysis or because of chronic illness (e.g.  
diabetes), we recommend not to use the seat heating. This can lead to burns  
on the back, the posterior and the legs which are difficult to heal. If the seat  
heating is used, we recommend to make regular breaks in your journey  
Note  
If the middle rear seat backrest should be folded forward for lengthy periods, then  
make sure that the belt locks are not located below it - this can result in permanent  
damage to the upholstery.  
Seats and Stowage 85  
WARNING (continued)  
WARNING (continued)  
when driving long distances, so that in specific cases as mentioned above  
the body can recuperate from the stress of the journey. Please consult your  
doctor, who can evaluate your specific condition.  
There must be no objects on the floor which could roll under the pedals.  
You would then no longer be able to apply the brakes, operate the clutch or  
accelerator - risk of accident!  
Caution  
luggage compartment  
You should not kneel on the seats or otherwise apply pressure at specific points  
in order to avoid damaging the heating elements of the seat heaters.  
Loading the luggage compartment  
Do not use the seat heating if the seats are not occupied by persons or if objects  
are fastened or stored on them, for example a child seat, a bag etc. A fault of the  
heating elements in the seat heating can occur.  
Please observe the following in the interest of having good handling char-  
acteristics of your vehicle:  
Do not clean the seats moist page 212.  
Distribute the items of luggage as evenly as possible.  
Place heavy objects as far forward as possible.  
Note  
The seat heating should only be switched on when the engine is running. This  
Attach the items of luggage to the lashing eyes or the fixing net*  
has a significant effect of saving on the battery capacity.  
page 86.  
If the on-board voltage drops, the seat heating is switched off automatically, in  
order to provide sufficient electrical energy for the engine control.  
In the event of an accident, there is such a high kinetic energy which is produced by  
small and light objects that they can cause severe injuries. The magnitude of the  
kinetic energy depends on the speed at which the vehicle is travelling and on the  
weight of the object. The speed at which the vehicle is travelling is in this case the  
more significant factor.  
Pedals  
Concerning a secure depressing of the pedal, you should use only footmats from  
the Škoda genuine accessories.  
Example: In the event of a frontal collision at a speed of 50 km/h, an unsecured  
object with a weight of 4.5 kg produces an energy, which corresponds to 20 times  
its own weight. This means that it results in a weight of approx. 90 kg. You can  
imagine the injuries that can occur, if this “bullet” is flying through the interior  
compartment and hits an occupant.  
Operation of the pedals must not be hindered!  
WARNING  
Greater pedal distances may be needed when there is a fault in the brake  
system.  
WARNING  
Store the objects in the luggage compartment and attach them to the  
lashing eyes, e.g. with the fixing nets.  
Do not place any footmats or other additional floor coverings in the area  
of the pedals in order to ensure that all the pedals can be fully depressed and  
are able to return unobstructed to their initial position - risk of accident!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
86 Seats and Stowage  
Fastening elements  
WARNING (continued)  
Loose objects in the passenger compartment can be thrown forward  
during a sudden manoeuvre or in case of an accident and can injure the  
occupants or other oncoming traffic. This risk is still increased, if the objects  
which are flying around are hit by a deployed airbag. In this case, the objects  
which are thrown back can injure the occupants - hazard.  
Please note that the handling properties of your vehicle may be affected  
when transporting heavy objects as a result of the displacement of the  
centre of gravity. The speed and style of driving must be adjusted accord-  
ingly.  
Fig. 93 Luggage compart-  
ment: Lashing eyes and  
fastening elements  
The items carried in the luggage compartment should be stored in such  
a way that no objects are able to slip forward if there are any sudden driving  
or braking manoeuvres undertaken - risk of injury!  
Never drive with the boot lid fully opened or slightly ajar otherwise  
exhaust gases may get into the interior of the vehicle - risk of poisoning!  
On no account exceed the permissible axle loads and the permissible  
gross weight of the vehicle - risk of accident!  
Never transport occupants in the luggage compartment!  
Fig. 94 Luggage compart-  
ment: Attachment points and  
fastening strip  
Caution  
Please ensure that the heating elements of the rear window heater are not  
damaged as a result of objects sliding in this area.  
Fixing eyes and fastening elements fig. 93 or fixing eyes and fastening strips* are  
fitted on both sides of the luggage compartment fig. 94.  
Note  
Tyre pressure must be adjusted to the load page 232.  
You can also attach the fixing nets*, for stowing small items of luggage, in the  
luggage compartment on the fixing eyes and fastening elements fig. 93 or on the  
fixing eyes and the fastening strip with integrated hook fig. 94.  
The fixing nets* and the installation instruction are located in the luggage compart-  
ment.  
Seats and Stowage 87  
Fastening strip with moveable hook*  
WARNING  
The load to be transported must be fixed in place in such a way that it  
cannot move during the journey and when braking.  
If the items of luggage or objects are attached to the lashing eyes with  
unsuitable or damaged lashing straps, injuries can occur in the event of  
braking manoeuvres or accidents. In order to prevent the items of luggage  
being thrown forward, always use suitable lashing straps which are firmly  
attached to the lashing eyes.  
Fig. 96 Luggage compart-  
ment: Fastening strip with  
moveable hook  
Folding hooks  
Fig. 95 Luggage compart-  
ment: folding hooks  
Fig. 97 Luggage compart-  
ment: Remove hook  
Folding hooks for attaching small items of luggage, such as bags etc., are provided  
on both sides of the luggage compartment fig. 95.  
A fastening strip is located on both sides of the luggage compartment  
with two moveable hooks each, in order to attach small items of luggage,  
such as bags etc. fig. 96. An item of luggage weighing up to 7.5 kg can  
be attached to each hook.  
An item of luggage weighing up to 7.5 kg can be attached to the hook.  
WARNING  
Move the hook into another position  
Please refer to the following guidelines page 85.  
A
Fold up the hook in direction of arrow A until an angle of 45° is  
reached fig. 96.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
88 Seats and Stowage  
B
Move the hook in direction of arrow A into the desired position and  
C
fold down the hook as far as the stop in direction of arrow A  
page 87, fig. 97.  
Remove the hook from the fastening strip  
D
Fold the hook in direction of arrow A until it slackens.  
Install the hook on the fastening strip  
Fig. 99 Fixing net: double  
vertical pockets  
Position the hook on the fastening strip in the vertical position in  
E
direction of arrow A and lightly press it on.  
D
Fold the hook down in opposite direction of the arrow Auntil it locks  
Fixing examples of the fixing net as double horizontal pockets, floor fixing net  
fig. 98 and double vertical pockets fig. 99.  
fully.  
The fixing nets* and the installation instruction are located in the luggage compart-  
ment.  
WARNING  
Please refer to the following guidelines page 85.  
WARNING  
The whole strength of the net makes it possible to load the pocket with  
objects of up to 3.5 kg in weight. Heavy objects are not secured sufficiently -  
risk of injury and net damage!  
Fixing nets - Net programme*  
The load to be transported must be fixed in place in such a way that it  
cannot move during the journey and when braking.  
Caution  
Do not place any objects with sharp edges in the nets - risk of net damage.  
Fig. 98 Fixing net: double  
horizontal pocket, floorfixing  
net  
Seats and Stowage 89  
You can stow the removed luggage compartment cover behind the rear seat back-  
rest.  
The luggage compartment cover  
You can use the luggage compartment cover behind the head  
restraints for storing light and soft items.  
The luggage compartment cover can also be put into the lower position on the  
fastening strips page 89.  
The procedure of installing or removing is identical.  
The luggage compartment cover is foreseen for storage of small objects of up to 2.5  
kg. in weight.  
WARNING  
No objects should be placed on the luggage compartment cover, the vehicle  
occupants could be endangered if there is sudden braking or the vehicle  
collides with something.  
Fig. 100 Removing the  
luggage compartment cover  
Caution  
The luggage compartment cover can be removed as required if one must  
transport bulky goods.  
Please ensure that the heating elements of the rear window heater are not  
damaged as a result of objects placed in this area.  
Remove the luggage compartment cover from the upper position  
Fold the seat backrests a little forward in order to facilitate the removal  
of the luggage compartment cover.  
1
Unhook the support straps on the boot lid A fig. 100.  
Place the cover in the horizontal position.  
2
Pull the luggage compartment cover out of the holders Ato the rear  
or press on the bottom side of the luggage compartment cover in the  
front area.  
Fold the slackened front part of the luggage compartment cover over  
the head restraints of the rear seats.  
Slightly tilt the luggage compartment cover and remove it to the rear.  
Install again by pushing the luggage compartment cover forwards into  
2
1
the holder A and hanging the support straps A on the boot lid.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
90 Seats and Stowage  
Static separation net*  
Fig. 103 Use of the static  
separation net behind the  
rear seats  
Seats and Stowage 91  
B
Take the cross rod out of the mounts A.  
Pack static separation net  
A
Press the red button of the joint A - so that it releases.  
Put the separation net folded together in the bag and close it.  
Attach the bag with the aid of the plastic carabines to the eyes on the  
left and right luggage compartment trim panel.  
Fig. 104 Use of the static  
separation net behind the  
front seats  
Installing and removing the static separation net behind the rear seats with variable  
loading floor* page 91 is carried out analogously as behind the rear seats  
without variable loading floor. Use the lower fixing eyes on the carrier rails in order  
to attach the carabines.  
Install the static separation net behind the front seats or the rear seats.  
D
The opening Apage 90, fig. 103 in the static separation net is designed to feed  
Installing the static separation net  
through the three-point seat belt page 156.  
Remove the luggage compartment cover page 89.  
Take the separation net out of the bag.  
Variable loading floor*  
Unfold both parts of the cross rod until they are heard to engage.  
Remove variable loading floor  
B
Insert the cross rod into the mount A first on the one side and push  
the cross rod forward. In the same way, fix the cross rod to the other  
B
side of the vehicle, mount A page 90, fig. 103.  
C
Hang the carabines A at the ends of the strap into the fixing eyes  
behind the rear or front seats.  
Pull the strap through the tensioning clasp, first of all on the one side  
and then on the other side.  
Remove the static separation net behind the rear seats  
Fig. 105 Luggage compart-  
ment: Fold up variable  
loading floor  
C
Slacken the bands on both sides and take off the carabines A  
page 90, fig. 103.  
Push the cross rod first of all on the one side and then on the other  
side towards the rear.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
92 Seats and Stowage  
C
Fold the hooks in direction of arrow A as far as the stop downwards  
page 87, fig. 97.  
Support the variable loading floor on the hooks folded downwards.  
WARNING  
Pay attention when installing that the carrier rails and the variable loading  
floor are correctly fixed, otherwise the occupants are at risk.  
Fig. 106 Luggage compart-  
ment: remove variable  
loading floor  
Note  
If the variable loading floor* is installed, no flexible storage compartment can be  
installed.  
The variable loading floor makes it easier to handle bulky goods and  
creates an even luggage compartment floor when the rear seat backrests  
are folded forward. The maximum permissable surface load of the vari-  
able loading floor is 75 kg.  
Remove carrier rails  
Remove variable loading floor  
You can fold together the loading floor by moving in the direction of  
arrow page 91, fig. 105.  
A
Raise the lid in direction of arrow A fig. 106.  
B
Pull on both sides of the locking levers in direction of arrow A  
fig. 106.  
C
Pull the loading floor up and out in direction of arrow A.  
Fig. 107 Luggage compart-  
ment: Slacken check points  
The installation of the variable loading floor is carried out in the  
reverse order.  
Secure the variable loading floor in the raised position  
Fold up the hooks on the fastening strip page 87.  
Fold up the variable loading floor behind the seat backrests of the rear  
seats.  
Seats and Stowage 93  
Variable loading floor* with spare wheel*  
Use variable loading floor  
Fig. 108 Luggage compart-  
ment: Remove carrier rails  
Install carrier rails  
Fig. 109 Luggage compart-  
ment: Fold the side parts of  
the loading floor  
B
Slacken the check points A on the carrier rails using the vehicle key  
or a flat screwdriver page 92, fig. 107.  
A
1
Grasp the carrier rail Aat the position Afig. 108 and slacken it by  
pulling in the direction of arrow.  
A
2
Grasp the carrier rail A at the position A, slacken it by pulling in the  
direction of arrow and take it out.  
The carrier rail on the other side of the luggage compartment can be  
removed in the same way.  
Install carrier rails  
Fig. 110 Example for using  
the variable loading floor  
Position the carrier rails on the sides of the luggage compartment.  
Press both check points on each carrier rail up to the stop.  
Check the attachment of the carrier rails by pulling it.  
The variable loading floor makes it easier to handle bulky goods and creates an  
even luggage compartment floor when the rear seat backrests are folded forward.  
The maximum permissable surface load of the variable loading floor is 75 kg.  
You can fold down the side parts of the loading floor in direction arrow in order to  
enlarge the space foreseen for stowing items of luggage fig. 109.  
WARNING  
Pay attention when installing that the carrier rails are correctly fixed, other-  
wise the occupants are at risk.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
94 Seats and Stowage  
Note  
Roof rack  
If the variable loading floor with spare wheel* is installed, no flexible storage  
compartment can be installed.  
Roof rail  
The variable loading floor with spare wheel* can be secured in the raised posi-  
tion in the same way as the variable loading floor without spare wheel* page 92,  
“Secure the variable loading floor in the raised position”.  
Removeable storage box  
Fig. 112 Roof rail  
Pay attention to the following points if you wish to transport luggage or other items  
on the roof of your vehicle:  
A special roof luggage rack system was developed for the vehicle, that is why  
you should only use a roof luggage rack which has been released for use by Škoda  
Auto.  
Fig. 111 Luggage compart-  
ment: Slacken check points  
The roof rail is the basis for a complete roof luggage rack system. Separate addi-  
tional holders are required for safety reasons for transporting luggage, bikes, surf-  
boards, skis and boats.  
A
The storage box Ais housed under the variable loading floor. If necessary, you can  
remove it.  
The basic version of the roof luggage rack system and further components are  
obtainable as accessories from the specialist garages.  
There is a space for the vehicle tool kit under the storage box page 242.  
WARNING  
Caution  
The removeable storage box must be located under the loading floor for the  
safe use of the variable loading floor.  
Ensure that the opened boot lid does not collide with the roof load.  
For the sake of the environment  
The increased aerodynamic drag results in a higher fuel consumption.  
Seats and Stowage 95  
Roof load  
Cup holder  
Distribute weight evenly over the roof luggage rack system. The maximum permis-  
sible roof load (including roof rack system) of 75 kg and the maximum permissible  
total weight of the vehicle should not be exceeded.  
Cup holder in front centre console  
You cannot make full use of the permissible roof load if you use a roof luggage rack  
system with a lower load carrying capacity. The load transported on the roof  
luggage rack system must not exceed the weight limit which is stated in the fitting  
instructions.  
WARNING  
The items which you transport on the roof bar system must be reliably  
attached - risk of accident!  
You must on no account exceed the permissible roof load, the permis-  
Fig. 113 Front centre  
console: Cup holder  
sible axle loads and the permissible gross weight of your vehicle - risk of  
accident!  
You can place two cups or beverage cans into the recesses fig. 113.  
Please note that the handling properties of your vehicle change when  
you transport heavy or bulky items on the roof bar system as a result of the  
displacement of the centre of gravity and the increased wind attack area -  
risk of accident! You must absolutely adapt your style of driving and the  
speed of the vehicle to the specific circumstances.  
WARNING  
Do not place any hot beverages into the cup holder. If the vehicle moves,  
the hot beverages may spill - risk of scalding!  
Do not use any cups or beakers which are made of brittle material (e.g.  
glass, porcelain). You might be injured by them in the event of an accident.  
Caution  
Do not open the beverages in the cup holder while driving. They may spill when  
braking and while doing so damage the vehicle.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
96 Seats and Stowage  
Cup holder in rear centre console*  
Note holder  
Fig. 114 Centre console at  
rear: Cup holder  
Fig. 115 Windscreen: Note  
holder  
A
Press on the panel in the area A fig. 114 - the cup holder comes  
The note holder is designed e.g. for attaching a car park ticket in parking areas.  
out.  
The attached note has to always be removed before starting off in order not to  
restrict the driver's vision.  
Pull the cup holder out as far as the stop.  
B
Adjust the cup holder by moving the locking plate A.  
Ashtray*  
WARNING  
Front ashtray  
Do not place any hot beverages into the cup holder. If the vehicle moves,  
the hot beverages may spill - risk of scalding!  
Do not use any cups or beakers which are made of brittle material (e.g.  
glass, porcelain). You might be injured by them in the event of an accident.  
Fig. 116 Centre console:  
Front ashtray  
Seats and Stowage 97  
Removing ashtray  
Replacing ashtray  
– Insert the ashtray into the console and press it in.  
Remove the ashtray page 96, fig. 116 upwards. When removing do  
not hold the ashtray at the cover - risk of breakage.  
There is a beverage holder attached to the inner side of the ashtray cover.  
Replacing ashtray  
Insert the ashtray vertically.  
WARNING  
Never lay flammable objects in the ashtray basin - risk of fire!  
WARNING  
Never lay flammable objects in the ashtray basin - risk of fire!  
Rear ashtray - high centre console*  
Rear ashtray - low centre console  
Fig. 118 High centre console:  
Rear ashtray  
Fig. 117 Low centre console:  
Rear ashtray  
Opening ashtray  
Press on the top part of the cover of the ashtray in area A fig. 118.  
A
Opening ashtray  
Removing ashtray insert  
A
Grasp the ashtray cover at the lower edge A and fold it open in the  
direction of arrow fig. 117.  
Press the cover of the ashtray down slightly as far as the stop.  
B
Grasp the ashtray insert at the cover A and pull it out.  
Removing ashtray  
Grasp the ashtray at the handle Aand pull it out in an upward direc-  
tion.  
Insert ashtray insert  
Insert the ashtray insert into the mount and press it in.  
B
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
98 Seats and Stowage  
The 12 volt power socket can also be used to supply power to electrical accessories  
with a power uptake up to 180 watts.  
WARNING  
Never lay flammable objects in the ashtray basin - risk of fire!  
WARNING  
Take care when using the cigarette lighter! Not paying proper attention  
or incorrect use the cigarette lighter in an uncontrolled manner may result in  
burns.  
Cigarette lighter*, power sockets  
Cigarette lighter  
The cigarette lighter and the power socket also operates when the igni-  
You can also use the socket on the cigarette lighter for other elec-  
trical appliances.  
tion is switched off or the ignition key withdrawn. You should therefore  
never leave children unattended in the vehicle.  
Caution  
Always use matching plugs to avoid damaging the power socket.  
Note  
Connecting electrical components when the engine is not running will  
drain the battery of the vehicle - risk of battery draining!  
Further information page 238, “Accessories, changes and replacement of  
Fig. 119 Centre console:  
Cigarette lighter  
parts”.  
Power socket in the luggage compartment  
Using the cigarette lighter  
Press in the button of the cigarette lighter fig. 119.  
Wait until the button jumps forward.  
Remove the cigarette lighter immediately and use it.  
Insert the cigarette lighter again into the socket.  
Using the socket  
Remove the cigarette lighter or the cover of the power socket.  
Connect the plug of the electrical appliance to the socket.  
Fig. 120 Luggage compart-  
ment: Power socket  
Seats and Stowage 99  
Open the cover of the power socket page 98, fig. 120.  
WARNING  
Connect the plug of the electrical appliance to the socket.  
Please do not place anything on top of the dash panel. Such objects  
might slide or fall down when driving (when accelerating or cornering) and  
may distract you from concentrating on the traffic situation - risk of acci-  
dent!  
You can only use the power socket for the connection of approved electrical acces-  
sories with a power uptake up to 180 watts. The vehicle battery will be discharged  
in the process if the engine is stationary.  
Ensure that when driving no objects from the centre console of from  
The same remarks apply here as for page 98.  
other storage possibilities may get into the footwell of the driver. You would  
then no longer be able to apply the brakes, operate the clutch or accelerator  
- risk of accident!  
Further information page 238, “Accessories, changes and replacement of  
parts”.  
Storage compartments  
Storage compartment on the front passenger side  
Overview  
You will find the following storage facilities in your vehicle:  
Storage compartment on the front passenger side  
Storage compartment on the dash panel*  
Storage compartment in front centre console  
Storage compartment for spectacles*  
Storage compartment in the front and rear doors  
Storage compartment below front passenger seat*  
Front seat armrest with storage compartment*  
Storage compartment in rear centre console*  
Storage compartments in the luggage compartment*  
Flexible storage compartment*  
page 99  
page 100  
page 101  
page 101  
page 101  
page 102  
page 102  
page 103  
page 103  
page 104  
page 104  
page 104  
Fig. 121 Dash panel: Storage  
compartment on the front  
passenger side  
Opening and closing the storage compartment on the front  
passenger side  
Press the button fig. 121 - the lid folds down.  
Raise the lid and press it until the catch is heard to engage.  
In the storage compartment are pin holders.  
Clothes hooks  
Through-loading bag*  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
100 Seats and Stowage  
WARNING  
Storage compartment on the dash panel*  
The storage compartment must always be closed when driving for safety  
reasons.  
Cooling of storage compartment on front passenger  
side*  
The compartment is fitted with an isolatable entry for cooled air.  
Fig. 123 Dash panel: Storage  
compartment  
Press on the button fig. 123 in direction of arrow, the cover then  
folds upwards.  
Certain model versions are equipped without lid for the storage compartment.  
Fig. 122 Storage compart-  
ment: Using cooling system  
WARNING  
The storage compartment is not a substitute for the ashtray and must  
also not be used for such purposes - risk of fire!  
The storage compartment must always be closed when driving for safety  
reasons.  
You can switch on the cooling system by pulling the lever in direction  
of arrow fig. 122.  
Switch off the cooling system by inserting the lever.  
Do not put any highly inflammable objects or objects which are sensitive  
to heat (e.g. lighters, sprays, spectacles, carbonated drinks) in the storage  
compartment.  
Opening the air inlet when the air conditioning system is on causes fresh or interior  
air to flow into the storage compartment.  
We recommend that you switch off the cooling if it is operating in the heating mode  
or if you are not using the cooling system for the storage compartment.  
Seats and Stowage 101  
A
Press button A, the storage compartment folds down fig. 125.  
Storage compartment in front centre console  
WARNING  
The compartment must only be opened when removing or inserting objects  
and otherwise must be kept closed.  
Storage compartment in the front and rear doors  
Fig. 124 Front centre  
console: Storage compart-  
ment  
The storage compartment without cover in the centre console is foreseen for  
storage of small objects.  
WARNING  
Fig. 126 Storage compart-  
ment in the front doors  
The storage compartment is not a substitute for the ashtray and must also  
not be used for such purposes - risk of fire!  
B
A bottle holder is located in the area A of the storage compartment for the front  
and rear doors.  
Storage compartment for spectacles*  
WARNING  
A
Use the area A fig. 126 of the storage compartment only for storing  
objects which do not project so that the effectiveness of the side airbag is not  
impaired.  
Fig. 125 Detail of the head-  
liner: Storage compartment  
for spectacles  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
102 Seats and Stowage  
Storage compartment below front passenger seat*  
Fig. 129 Armrest: Cooling of  
storage compartment  
Fig. 127 Front passenger  
seat: Storage compartment  
The armrest is adjustable for height and length.  
Opening storage compartment  
The storage compartment is foreseen for storing small objects of up to 1.5  
kg. in weight.  
Open the lid of the armrest in the direction of arrow fig. 128.  
Tilt the lock to open the flap and pull out the flap fig. 127.  
Closing storage compartment  
Open the lid up to the stop, then you can fold it downwards.  
Tilt the lock to close the flap and press flap close.  
Setting height  
Front seat armrest with storage compartment*  
First of all fold the lid to the bottom and lift it in the direction of arrow  
into one of the 4 fixed positions.  
Adjusting in forward/back direction  
Push the lid into the desired position.  
Opening air inlet  
A
Pull the lock A in upward direction fig. 129.  
Closing air inlet  
Fig. 128 Armrest: Storage  
compartment  
A
Push the lock A as far as the stop downwards.  
Seats and Stowage 103  
On vehicles fitted with air conditioning, the storage compartment is equipped with  
a lockable inlet for thermally treated (warmed-up) air.  
WARNING  
The storage compartment is not a substitute for the ashtray and must also  
not be used for such purposes - risk of fire!  
At open air supply, air flows into the storage with a temperature which is as high as  
the one out of the air outlet nozzles, depending on temperature setting.  
The air inlet in the storage compartment is connected to position through  
adjustment of the control dial for air distribution. This position causes the  
maximum amount of air to flow into the storage compartment (depending on the  
rotary regulator position for the fan).  
Storage compartments in the luggage  
compartment*  
You can use the storage compartment, for example, to temper drinks cans, etc.  
If you do not use the air inlet in the storage compartment, the end cover  
should always be kept closed.  
Note  
Push the lid of the armrest up to stop to the rear before operating the handbrake.  
Fig. 131 Luggage compart-  
ment: Storage compartment  
on the right side  
Storage compartment in rear centre console*  
Fig. 130 Centre console at  
rear: Storage compartment  
Fig. 132 Luggage compart-  
ment: removeable storage  
compartment on the left side  
The storage compartment is equipped with a removeable insert.  
Storage compartments are located on both sides of the luggage compartment.  
Open the storage compartment by pulling on the upper edge of the  
The storage compartment on the right side fig. 131 is suitable for stowing small  
objects weighing up to 0.5 kg.  
A
storage compartment A in the direction of arrow fig. 130.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
104 Seats and Stowage  
The removeable storage compartment on the left side page 103, fig. 132 is suit-  
able for stowing small objects weighing up to 1.5 kg.  
Clothes hooks  
The clothes hooks are located on the middle pillar and on the handle of the head-  
liner above each of the rear doors.  
Flexible storage compartment*  
WARNING  
Ensure that any clothes hanging from the hooks do not impair your  
vision to the rear.  
Use the hooks for hanging only light items of clothing and ensure that  
there are no heavy or sharp-edged objects in the pockets.  
The maximum permissable load of the hooks is 2 kg.  
Do not use clothes hangers for hanging up items of clothing otherwise  
this will interfere with the protection offered by the head airbag*.  
Fig. 133 Flexible storage  
compartment  
Through-loading bag*  
A flexible storage compartment is located on the right side of the luggage  
compartment. The flexible storage compartment is foreseen for storing  
small objects of up to 8 kg. in weight.  
Removing  
Take hold of the flexible storage compartment at both upper corners.  
Press the upper corners to the inside and release the storage compart-  
ment by pulling upwards.  
Fig. 134 Attaching through-  
loading bag to middle seat  
belt buckle of rear seats  
Remove by pulling towards you.  
Installing  
Insert both ends of the flexible storage compartment into the open-  
Loading  
ings of the right side trim panel of the luggage compartment and push  
it downwards until it locks.  
Open a rear side door of the vehicle.  
Fold the backrest of the middle seat forwards page 80.  
Seats and Stowage 105  
Place the empty through-loading bag in the gap between the front and  
rear seats in such a way that the end of the bag with the zip lies in the  
luggage compartment.  
Note  
The through-loading bag is foreseen for two pairs of skis.  
You must put the skis and the sticks in the through-loading bag with the tips  
facing the rear.  
Open the boot lid.  
Push the skis into the through-loading bag from the luggage compart-  
If there are skis with different lengths in the through-loading bag, ensure that  
the bindings are always positioned at the same height.  
ment ⇒  
.
The through-loading bag must never be folded together or stowed when  
moist.  
Close the through-loading bag with the zip.  
Securing  
Pull the securing belt with both lock tongues out of the pocket of the  
through-loading bag.  
A
Insert the lock tongues Ain the belt locks of the rear middle seat belt  
C
A, first of all on the one side and then on the other side page 104,  
fig. 134.  
Place the securing belt in the middle of the skis between the bindings.  
B
Pull the securing belt tight at the free end of the belt A.  
Stowing  
Carefully fold the empty (dry) through-loading bag together, place it in  
the luggage compartment and secure it to prevent it slipping.  
WARNING  
After placing the skis into the through-loading bag, you must secure it  
A
with the securing belt A.  
The securing belt must hold the items tight.  
Ensure that the securing belt for skis grasps the middle between the tip  
and the heel element of the binding (see also imprint on the through-  
loading bag).  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
106 Heating and air conditioning system  
Heating and air conditioning system  
6
Air outlet vents  
Turn the vertical wheel (between the end positions) fig. 136.  
The information provided is valid for all vehicles.  
Close air outlet vents 3 and 4  
Turn the horizontal wheel into the end position (left).  
Close air outlet vents 6  
Turn the vertical wheel into the end position.  
Change air flow of air outlet vents 3 and 4  
In order to change the strength of the air flow, swivel the horizontal  
lamellas with the aid of the moveable adjuster.  
In order to change the lateral direction of the air flow, turn the vertical  
lamellas with the aid of the moveable adjuster.  
Fig. 135 Air vents at the front  
Change air flow of air outlet vents 6  
In order to change the strength of the air flow, swivel the horizontal  
lamellas with the aid of the vertical wheel upwards or downwards.  
In order to change the lateral direction of the air flow, turn the vertical  
lamellas with the aid of the horizontal wheel to the left or to the right.  
The air outlet vents 3, 4 fig. 135 and 6 fig. 136 can be closed and opened indi-  
vidually.  
The air outlet vents 6 are only fitted on vehicles with higher centre console.  
Warmed, unwarmed or cooled air will flow out of the air outlet vents according to  
the setting of the regulator of the heating or the air conditioning system* and the  
atmospheric conditions.  
Fig. 136 Air vents at the rear  
3 and 4  
Turn the horizontal wheel (right) fig. 135.  
Heating and air conditioning system 107  
Controlling blower  
Note  
B
Turn the blower switch Ainto one of the positions, 1 to 4, in order to  
The air outlet vents 2 ensure in the ventilation and cooling mode for a comfortable  
(no-draught) ventilation of the interior of the vehicle, also if the air outlet vents 4  
are closed.  
switch the blower on.  
B
Turn the blower switch Ainto position 0 in order to switch the blower  
off.  
1
Pressing button A causes the recirculating air system ⇒  
to be  
Heating  
switched on.  
Using the system  
Control for air distribution  
The heating system delivers air into the interior of the vehicle and  
warms it as required.  
You can adjust the direction of the air flow using the air distribution  
C
control A page 106.  
Rear window heater  
2
Press button A. Further information page 68, “Rear window  
heater”.  
Auxiliary heating (auxiliary heating)*  
3
Press the button A in order to directly switch on/off the auxiliary  
heating (auxiliary heating and ventilation). Further information  
page 117, “Auxiliary heating (auxiliary heating and ventilation)*”.  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and ventilation systems operate properly.  
Fig. 137 Heating: Control elements  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
Setting temperature  
The blower should aways be on to prevent the windows from misting up.  
A
Turn the control dial Afig. 137 to the right in order to increase the  
temperature.  
WARNING  
A
Turn the control dial A to the left in order to increase the tempera-  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
ture.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
108 Heating and air conditioning system  
WARNING (continued)  
Note  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
The whole heat output will be needed to unfrost the windscreen and side  
windows. No warm air will be fed to the footwell. This can lead to restriction of the  
heating comfort.  
The used air streams out through the air removal openings in the luggage  
compartment.  
Set heating  
Recommended settings of heating controls for:  
Setting of the control dial  
Set-up  
Air outlet vents 4  
1
Button A  
A
A
B
A
C
A
Defrosting the windscreen and side  
windows  
up to the stop towards  
the right  
open and align with the side win-  
dow  
3
do not switch on  
do not switch on  
briefly switched on  
do not switch on  
do not switch on  
  
Free windscreen and side windows  
from mist  
open and align with the side win-  
dow  
desired temperature  
2 or 3  
up to the stop towards  
the right  
the fastest heating  
3
open  
open  
open  
comfortable heating  
Fresh air mode - ventilation  
desired temperature  
2 or 3  
up to the stop towards  
the left  
desired position  
Note  
We recommend that you leave the air outlet vents 3 page 106, fig. 135 in the  
opened position.  
Heating and air conditioning system 109  
Recirculated air mode  
Climatic* (semi-automatic air conditioning system)  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior.  
Description  
The Climatic is a combined cooling and heating system. It makes it  
possible to optimally control the air temperature at any season of the  
year.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam.  
Description of the Climatic  
Switching recirculated air mode on  
It is important for your safety and for your driving comfort that the Climatic is oper-  
ating properly.  
Press the button  
- the warning light lights up in the button  
page 107, fig. 137.  
AC  
1
The cooling only operates if button  
following conditions are met:  
page 110, fig. 138 Ais pressed, and the  
Switching recirculated air mode off  
engine running,  
Press again the button  
- the warning light in the button goes out.  
outside temperature above approx. +2°C and  
blower switch switched on (positions 1 to 4).  
The recirculated air mode is switched off automatically if the air distribution control  
Ais in position page 107, fig. 137. You can also switch recirculated air mode  
on again from this setting by repeatedly pressing button  
C
If the cooling system is switched on, the temperature and air humidity drops in the  
vehicle. The wellbeing of the occupants of the car is enhanced as a result of this  
particularly at high outside temperatures and a high air humidity. The system  
prevents the windows misting up during the cold season of the year.  
.
WARNING  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
It is possible to briefly activate recirculated air mode in order to enhance the  
cooling effect ⇒  
.
Air at a temperature of about 5°C may flow out of the vents under certain circum-  
stances when the cooling system is operating. Lengthy and uneven distribution of  
the air flow out of the vents and large differences in temperature, for example when  
getting out of the vehicle, can result in chills in sensitive persons.  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and cooling systems operate properly.  
After switching on the cooling Condensation from the evaporator of the air condi-  
tioning may drip down and form a puddle below the vehicle. This is quite normal  
and not an indication of a leak!  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
110 Heating and air conditioning system  
WARNING  
Using the system  
For your own safety and that of other road users, ensure that all the  
windows are free of ice, snow and misting. Please familiarize yourself about  
how to correctly operate the heating and ventilation systems, how to demist  
and defrost the windows, as well as with the cooling mode.  
You should not leave recirculated air mode on over a longer period of  
time, as “stale” air may result in fatigue in the driver and occupants, divert  
your attention and also cause the windows to mist up. The risk of having an  
accident increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Note  
We recommend that you do not smoke in the vehicle when the recirculating air  
mode is operating since the smoke which is drawn at the evaporator from the inte-  
rior of the vehicle forms deposits in the evaporator of the air conditioning system.  
This produces a permanent odour when the air conditioning system is operating  
which can only be eliminated through considerable effort and expense (replace-  
ment of compressor).  
Fig. 138 Climatic: Control elements  
Setting temperature  
A
Turn the control dial Afig. 138 to the right in order to increase the  
temperature.  
A
Turn the control dial A to the left in order to increase the tempera-  
ture.  
Controlling blower  
B
Turn the blower switch Ainto one of the positions, 1 to 4, in order to  
switch the blower on.  
B
Turn the blower switch Ainto position 0 in order to switch the blower  
off.  
4
Pressing button  
A - causes the recirculating air system  
page 112 to be switched on.  
Control for air distribution  
You can adjust the direction of the air flow using the air distribution  
C
control A page 106.  
Heating and air conditioning system 111  
The set temperature will be automatically maintained other than when the  
control dial is on the extreme right or extreme left position:  
switching cooling on and off  
AC  
1
Press the button  
up in the button.  
Apage 110, fig. 138. The warning light lights  
Extreme right position - full heating;  
Extreme left position - full cooling;  
AC  
When you again press the switch  
, the cooling system is switched  
The blower should aways be on to prevent the windows from misting up.  
off. The warning light in the button goes out.  
Rear window heater  
Note  
The whole heat output will be needed to unfrost the windscreen and side  
windows. No warm air will be fed to the footwell. This can lead to restriction of the  
heating comfort.  
2
Press button  
heater”.  
A. Further information page 68, “Rear window  
The used air streams out through the air removal openings in the luggage  
compartment.  
Auxiliary heating (auxiliary heating)  
3
Press the button  
A in order to directly switch on/off the auxiliary  
If the cooling system has not been switched on for a lengthy period, odours may  
heating (auxiliary heating and ventilation. Further information  
be produced at the evaporator because of deposits. Switch the cooling system on  
at least once a month for approximately 5 minutes at the highest blower stage - also  
during the cold season of the year - in order to remove such odours. Also open a  
window for a short time.  
page 117, “Auxiliary heating (auxiliary heating and ventilation)*”.  
Please refer to the information regarding recirculated air mode page 112.  
Set Climatic  
Recommended settings of Climatic controls for the respective operating modes:  
Setting of the control dial  
Set-up  
Button  
Air outlet vents 4  
A
A
B
A
C
A
1
A
4
A
Defrosting the windscreen and  
side windows  
recommended  
22°C  
open and align with the side  
window  
3
2
3
switched off  
switched on  
switched off  
do not switch on  
do not switch on  
briefly switched on  
Free windscreen and side win-  
dows from mist  
desired tempera-  
ture  
open and align with the side  
window  
recommended  
22°C  
the fastest heating  
open  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
112 Heating and air conditioning system  
Set-up  
Setting of the control dial  
Button  
Air outlet vents 4  
A
A
B
A
C
A
1
A
4
A
desired tempera-  
ture  
comfortable heating  
the fastest cooling  
2 or 3  
switched off  
switched on  
switched on  
switched off  
do not switch on  
briefly switched on  
do not switch on  
do not switch on  
open  
  
recommended  
22°C  
briefly 4, then  
2 or 3  
open  
open and align to the roof  
open  
desired tempera-  
ture  
optimal cooling  
1, 2 or 3  
up to the stop  
towards the left  
Fresh air mode - ventilation  
desired position  
The recirculated air mode is switched off automatically if the air distribution control  
Note  
C
Ais in position page 110, fig. 138. You can also switch recirculated air mode  
on again from this setting by repeatedly pressing button  
.
We recommend that you leave the air outlet vents 3 page 106, fig. 135 in the  
opened position.  
WARNING  
Recirculated air mode  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam.  
Using the air conditioning system economically  
Switching recirculated air mode on  
The compressor on the air conditioning system uses power from the engine when  
in cooling mode which will effect the fuel consumption.  
4
Press the button  
up in the button.  
A page 110, fig. 138 the warning light lights  
It recommended to open the windows or the doors of a vehicle for which the inte-  
rior has been strongly heated through the effect of direct sunlight in order to allow  
the heated air to escape.  
Switching recirculated air mode off  
Press again the button  
- the warning light in the button goes out.  
The cooling system should not be switched on while travelling when the window is  
open.  
Heating and air conditioning system 113  
The desired interior temperature can also be achieved without switching in the  
cooling system just by switching to fresh air mode.  
engine running,  
outside temperature above approx. +2°C,  
AC  
switched on.  
For the sake of the environment  
When you economize on fuel, you also reduce pollutant emissions.  
If the cooling system is switched on, the temperature and air humidity drops in the  
vehicle. The wellbeing of the occupants of the car is enhanced as a result of this  
particularly at high outside temperatures and a high air humidity. The system  
prevents the windows misting up during the cold season of the year.  
Operational problems  
The heating effect is dependent upon the coolant temperature, thus full heat  
output only occurs when the engine has reached its operating temperature.  
If the cooling system does not operate at outside temperatures higher than +5 °C,  
there is a problem in the system. The reasons for this may be:  
It is possible to briefly activate recirculated air mode in order to enhance the  
cooling effect page 116.  
The fuse on the air conditioning system has blown. Check the fuse, replace it if  
necessary page 252.  
The cooling system has switched off automatically for a short time because the  
The air inlet in front of the windscreen must be free of ice, snow or leaves in order  
to ensure that the heating and cooling systems operate properly.  
coolant temperature of the engine is too hot page 18.  
The AC compressor is switched off at a high coolant temperature in order to provide  
cooling at a high load of the engine.  
If you are not able to rectify the operational problem yourself, or if the cooling  
capacity decreases, switch the cooling system off. Contact a specialist garage.  
After switching on the cooling Condensation from the evaporator of the air condi-  
tioning may drip down and form a puddle below the vehicle. This is quite normal  
and not an indication of a leak!  
Climatronic* (automatic air conditioning)  
Recommended setting for all periods of the year:  
Set the desired temperature, we recommend 22 °C.  
AUTO  
Description  
Press the button  
page 114, fig. 139.  
The Climatronic system is a combination of an automatic heating,  
fresh air and cooling system which provides optimal comfort for the  
occupants of the car.  
Move the air outlet vents 3 and 4, so that the air flow is directed slightly  
upwards.  
The Climatronic maintains fully automatically a convenience temperature. This is  
achieved by automatically varying the temperature of the outflowing air, the blower  
stages and the air distribution. The system also takes into account sunlight which  
eliminates the need to alter the settings manually. The automatic mode  
page 115 ensures maximum wellbeing of the occupants at all times of the year.  
WARNING  
For your own safety and that of other road users, ensure that all the  
windows are free of ice, snow and misting. Please familiarize yourself about  
how to correctly operate the heating and ventilation systems, how to demist  
and defrost the windows, as well as with the cooling mode.  
Description of Climatronic system  
You should not leave recirculated air mode on over a longer period of  
time, as “stale” air may result in fatigue in the driver and occupants, divert  
The cooling operates only if the following conditions are met:  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
114 Heating and air conditioning system  
Overview of the control elements  
WARNING (continued)  
The controls enable a separate setting of the temperature for the left  
and right side.  
your attention and also cause the windows to mist up. The risk of having an  
accident increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Note  
If the cooling system has not been switched on for a lengthy period, odours may  
be produced at the evaporator because of deposits. Switch the cooling system on  
at least once a month for approximately 5 minutes at the highest blower stage - also  
during the cold season of the year - in order to remove such odours. Also open a  
window for a short time.  
We recommend that you do not smoke in the vehicle when the recirculating air  
mode is operating since the smoke which is drawn at the evaporator from the inte-  
rior of the vehicle forms deposits in the evaporator of the air conditioning system.  
This produces a permanent odour when the air conditioning system is operating  
which can only be eliminated through considerable effort and expense (replace-  
ment of compressor).  
Fig. 139 Climatronic: Control elements  
The buttons  
The used air streams out through the air removal openings in the luggage  
compartment.  
1
A Defrost windscreen intensively  
On vehicles equipped with a factory-fitted radio* or navigation*, the informa-  
tion of the Climatronic is also shown on the display. This function can be switched  
off, see operating instructions of the radio* or the navigation system*.  
2
A Air flow to the windows  
3
A Air flow to head  
4
A Air flow in the footwell  
Using the cooling economically page 112.  
Operational problems page 113.  
5
A Recirculated air mode  
with air quality sensor  
6
A Rear window heater  
Buttons / control dial  
7
A Setting of the temperature for the left side, operation of the seat heating of the  
left front seat*  
8
AUTO  
A Automatic mode  
9
OFF  
A Switching off Climatronic  
10  
A Setting the blower speed  
11  
A Button for direct switching on/off of auxiliary heating (auxiliary heating)*  
page 117  
12  
DUAL  
A Switching on/off of the temperature setting in dual mode  
Heating and air conditioning system 115  
13  
AC  
A Switching cooling on and off  
switching cooling on and off  
switching cooling on and off  
14  
A Setting of the temperature for the right side, operation of the seat heating of  
the right front seat*  
AC  
Press the button  
in the button.  
page 114, fig. 139. The warning light lights up  
Note  
Below the top row of buttons is located the interior temperature sensor. Do not  
glue or cover over the sensor, otherwise it could have an unfavourable effect on the  
Climatronic.  
AC  
When you again press the switch  
, the cooling system is switched  
off. The warning light in the button goes out. Only the function of the  
ventilation remains active when no lower temperature than the  
outside temperature can be reached.  
Automatic mode  
The automatic mode is used in order to maintain a constant temper-  
ature and to demist the windows in the interior of the car.  
Setting temperature  
You can separate the interior temperature for the left and right side sepa-  
rately.  
Switching automatic mode on  
Set a temperature between +18 °C and +26 °C.  
You can set the temperature for both sides after switching on the igni-  
Move the air outlet vents 3 and 4 page 106, fig. 135, so that the air  
7
tion with the control dial A.  
flow is directed slightly upwards.  
If you wish to set the temperature for the right side, turn the control  
AUTO  
. In the right or left top corner a warning light  
Press the button  
14  
DUAL  
lights up, this indicates  
dial A. The warning light in the button  
lights up, depending on which unit was last selected.  
that differing temperatures for the left and right side can be set.  
AUTO  
If the warning light in the top right corner of the button  
lights up, the  
DUAL  
If the warning light in the button  
lights up, the temperature for both sides  
Climatronic operates in “HIGH” mode. The “HIGH” mode is the standard setting of  
the Climatronic.  
7
cannot be set with the control dial A. You can reinitiate this function by pressing  
DUAL  
the button  
. The warning light in the button which indicates the possibility to  
set differing temperatures for the left and right side, goes out.  
AUTO  
When pressing again the button  
, the Climatronic changes into the “LOW”  
mode and the warning light in the top left corner lights up. The Climatronic uses  
only in this mode the lower blower speed. However taking into account the noise  
level, this is more comfortable, yet be aware that the effectiveness of the air condi-  
tioning system is reduced particularly if the vehicle is fully occupied.  
You can set the interior temperature between +18°C and +26°C. The interior  
temperature is regulated automatically within this range. If you chose a tempera-  
ture lower than +18°C, a blue symbol lights up at the start of the numerical scale. If  
you chose a temperature higher than +26°C, a red symbol lights up at the end of  
the numerical scale. In both limit positions the Climatronic operates at maximum  
cooling or heating capacity, respectively. The temperature is not controlled in this  
case.  
AUTO  
By pressing again the button  
, you change into the “HIGH” mode.  
The automatic mode is switched off by pressing the button for the air distribution  
or increasing or decreasing the blower speed. The temperature is nevertheless  
regulated.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
116 Heating and air conditioning system  
Lengthy and uneven distribution of the air flow out of the vents (in particular at the  
leg area) and large differences in temperature, for example when getting out of the  
vehicle, can result in chills in sensitive persons.  
Switching recirculated air mode off  
AUTO  
Press the button  
or press the button  
repetitively, until the  
warning lights in the button go out.  
Recirculated air mode  
WARNING  
In recirculated air mode air is sucked out of the interior of the vehicle  
and then fed back into the interior. When the automatic air distribu-  
tion control is switched on, an air quality sensor measures the  
concentration of pollutants in the drawn-in air.  
You should not leave recirculated air mode on over a longer period of time,  
as “stale” air may result in fatigue in the driver and occupants, divert your  
attention and also cause the windows to mist up. The risk of having an acci-  
dent increases. Switch recirculated air mode off as soon as the windows  
begin misting up.  
Recirculated air mode prevents polluted air outside the vehicle from  
getting into the vehicle, for example when driving through a tunnel or  
when standing in a traffic jam. If a considerable increase in concentration  
of pollutants is recognized by the air quality sensor, when the automatic  
air distribution control is switched on, the air distribution control will  
temporarily be switched off. If the concentration of pollutants decreases  
to the normal level, the air distribution control is automatically switched  
off so that fresh air can be guided into the vehicle interior.  
Note  
1
If the windscreen mists up, press the button  
the windscreen has been demisted, press the button  
The automatic air distribution control operates only if the outside temperature  
A page 114, fig. 139. After  
AUTO  
.
is higher than approx. 2°C.  
Controlling blower  
Switching recirculated air mode on  
There are a total of seven blower stages available.  
Press the button repeatedly  
side of the button lights up.  
until the warning light on the left  
The Climatronic system controls the blower stages automatically in line  
with the interior temperature. You can also, however, adapt the blower  
stages manually to suit your particular needs.  
Switch on automatic air distribution control  
Press the button repeatedly  
side of the button lights up.  
until the warning light on the right  
on the left side (reduce blower speed) or on  
Press again the button  
the right side (increase blower speed).  
Switch off automatic air distribution control temporarily  
If you switch off the blower, the Climatronic is switched off.  
If the air quality sensor does not switch on the air distribution control  
automatically when there is a nauseating smell, you can switch it on  
The set blower speed is displayed above the button  
number of warning lights come on.  
when the respective  
yourself by pressing the button  
the button on the left side.  
*. The warning light lights up in  
Heating and air conditioning system 117  
The auxiliary heating (auxiliary heating) warms up the coolant during the combus-  
tion of fuel from the vehicle tank. The coolant warms up the air, which (if the blower  
speed is not set to zero) flows into the occupant compartment.  
WARNING  
“Stale air” may result in fatigue in the driver and occupants, reduce  
attention levels and also cause the windows to mist up. The risk of having an  
accident increases.  
Auxiliary ventilation  
The auxiliary ventilation enables fresh air to flow into the vehicle interior by  
switching off the engine, whereby the interior temperature is effectively decreased  
(e.g. with the vehicle parked in the sun).  
Do not switch the Climatronic system off for longer than necessary.  
Switch the Climatronic system on as soon as the windows mist up.  
Defrosting windscreen  
WARNING  
The auxiliary heating must never be operated in closed rooms - risk of  
poisoning!  
Defrosting windscreen - switching on  
Press the button  
page 114, fig. 139.  
The auxiliary heating must not be running during refueling - risk of fire.  
The exhaust pipe of the auxiliary heating is located on the underside of  
the vehicle. Therefore do not place the vehicle, if you wish to operate the  
auxiliary heating, in such a way that the exhaust gases of the auxiliary  
heating can come easily into contact with inflammable materials (e.g. dry  
grass) or easily inflammable substances (e.g. fuel run out).  
Defrosting windscreen - switching off  
AUTO  
Once again press the button  
or the button  
.
The temperature control is controlled automatically. More air flows out of the air  
outlet vents 1 and 2.  
Note  
If the auxiliary heating runs, the fuel consumption comes from the vehicle tank. The  
auxiliary heating automatically controls the filling level in the fuel tank. If only a low  
quantity of fuel is present in the fuel tank, the function of the auxiliary heating is  
blocked.  
Auxiliary heating (auxiliary heating and ventilation)*  
Description and important information  
The auxiliary heating (auxiliary heating and ventilation) heats or  
supplies the interior of the vehicle with fresh air independent of the  
engine.  
The exhaust pipe of the auxiliary heating, which is located on the underside of  
the vehicle, must not be clogged and the exhaust flow must not be blocked.  
If the auxiliary heating and ventilation is running, the vehicle battery discharges.  
If the auxiliary heating and ventilation has been operated several times over a  
longer period, the vehicle must be driven a few kilometers in order to recharge the  
vehicle battery.  
Auxiliary heating (auxiliary heating)  
The auxiliary heating (auxiliary heating) functions in connection with the Climatic or  
Climatronic.  
The auxiliary heating only switches the blower on, if it has achieved a coolant  
It can be used when stationary, when engine is switched off for preheating of the  
vehicle as well as while driving (only during the heating phase of the engine).  
temperature of approx. 50 °C.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
118 Heating and air conditioning system  
At low outside temperatures, this can result in a formation of water vapour in  
The auxiliary heating (auxiliary heating and ventilation) can be switched on or off at  
the area of the engine compartment. This is quite normal and is not an operating  
problem.  
any time directly using the button  
Climatronic or heating fig. 140.  
on the operating part of the Climatic,  
After switching off the auxiliary heating, the coolant pump runs for a short  
period.  
If the auxiliary heating and ventilation is not switched off earlier, it switches off  
automatically after the expiration of the set operating period, in the menu Running  
time.  
The auxiliary heating and ventilation does not switch on or comes on, if the  
vehicle battery indicates a low loading state.  
The auxiliary heating (auxiliary heating) does not switch on, if the following was  
shown in the information display or before switching off the ignition: Please refuel!  
(Please refuel!).  
Note  
A radio remote control for the auxiliary heating can be obtained from Škoda original  
accessories.  
The air inlet in front of the windscreen must be free of ice, snow or leaves in  
order to ensure that the auxiliary heating operates properly.  
So that warm air can flow into the vehicle after switching on the auxiliary  
Using the system  
heating, you must maintain the temperature normally selected by you (we recom-  
mend 22°C for Climatic, Climatronic and for the heating turn the regulator A to the  
right page 107, fig. 137). It is recommended to put the air flow in the position .  
So that the auxiliary heating (auxiliary heating and ventilation) func-  
tions according to your expectations, it is necessary to carry out the  
basic setting before its programming.  
On vehicles with DPF (diesel particle filter) the warm coolant heats up the  
engine.  
Direct switching on/off  
Fig. 141 Information  
display: Aux. Heating (auxil-  
iary heating)  
Fig. 140 Button for direct  
switching on/off of the auxil-  
iary heating (auxiliary  
heating and ventilation) on  
the operating part of the  
Climatic  
Basic setting  
On the information display, select from the Main menu the menu  
point Aux. heating.  
In the menu Aux. heating (auxiliary heating) fig. 141 select the  
menu point Weekday and set the current day.  
Heating and air conditioning system 119  
The last programmed pre-set time remains active.  
By selecting the menu point Back you will reach one level higher.  
After the auxiliary heating activates at the set time, it is necessary to pre-set a time  
again.  
In the menu Aux. Heating select the menu point Running time and  
set the desired operating period in steps of 5 minutes. The operating  
period can be 10 to 60 minutes.  
Changing the active pre-set time is carried out after selecting the menu point  
Activate in the menu Aux. heating (auxiliary heating) by selecting a pre-set time.  
By selecting the menu point Back, you will reach in the menu  
Aux. Heating (auxiliary heating).  
The prerequisite for the correct switching on of the auxiliary heating (auxiliary  
heating and ventilation) according to the programmed pre-set time is the correct  
setting of the current time and the weekday page 118.  
In the menu Aux. heating (auxiliary heating) select the menu point  
Mode.  
If the system is running, a warning light in the button for direct switching on/off of  
the auxiliary heating  
lights up.  
In the menu Mode select the desired mode Heating or Ventilation.  
The running system deactivates after expiration of the operating period or is deac-  
tivated earlier by pressing the button for direct switching on/off of the auxiliary  
Programming  
heating  
page 118.  
The random pre-set time can be deactivated by selecting the menu point Deactive  
in the menu Activate.  
For the programming of the auxiliary heating (auxiliary heating and ventilation) in  
the menu Aux. heating (Aux. heating) there are three pre-set times:  
After selecting the menu point Factory setting in the menu Aux. heating, it is  
possible to change to the factory setting.  
Pre-set time 1  
Pre-set time 2  
Pre-set time 3  
In each pre-set time, the day and the time (hour and minute) can be set for  
switching on the auxiliary heating and/or ventilation.  
An empty position can be found between Sunday and Monday when selecting the  
day. If this empty position is selected, the activation is performed without taking  
into account the day.  
If you leave the pre-set menu by selecting the menu Back or do not operate the  
display for longer than 10°seconds, the set values are stored, but the pre-set time is  
not active.  
Both other pre-set times can be programmed and stored in the same way.  
If you select the menu Activate after setting the desired values, appears on the  
display Pre-set time (weekday, hours, minute) activated! (Pre-set time  
(weekday, hour, minute) activated! and the set pre-set time is active.  
Only one programmed pre-set time can be active.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
120 Starting-off and Driving  
Starting-off and Driving  
Push the lever upwards as far as the stop.  
Setting steering wheel position  
WARNING  
You must not adjust the steering wheel when the vehicle is moving!  
The driver must maintain a distance of at least 25 cm to the steering  
wheel fig. 143. Not maintaining this minimum distance will mean that the  
airbag system will not be able to properly protect you - hazard!  
For safety reasons the lever must always be firmly pushed up to avoid the  
steering wheel altering its position unintentionally when driving - risk of  
accident!  
Fig. 142 Adjustable steering  
wheel: Lever below steering  
column  
If you adjust the steering wheel further towards the head, you will reduce  
the protection offered by the driver airbag in the event of an accident. Check  
that the steering wheel is aligned to the chest.  
When driving, hold the steering wheel with both hands firmly on the  
outer edge in the 9 o'clock and 3 o'clock position. Never hold the steering  
wheel firmly in the 12 o'clock position or in another way (e.g. in the middle  
of the steering wheel or at the inner steering wheel edge). In such cases,  
injuries to the arms, the hands and the head can occur when the driver  
airbag is deployed.  
Fig. 143 Safe distance to  
steering wheel  
You can set the height and the forward/back position of the steering  
wheel to the desired position.  
Adjust the driver seat page 12.  
Pull the lever below the steering column fig. 142 down ⇒  
.
Set the steering wheel to the desired position (concerning height and  
forward/back position).  
Starting-off and Driving 121  
Move the steering wheel back and forward a little if the ignition key cannot, or  
Ignition lock  
cannot easily be turned into this position, in order to release the steering lock.  
3
Position A  
The engine is started in this position. At the same time, major electrical compo-  
nents are switched off for short periods. The ignition key moves back into position  
2
A when one releases the key.  
1
The ignition key must be turned back into position Aeach time before starting the  
engine again. The starter repeat lock in the ignition lock prevents the starter being  
engaged when the engine is running and thus getting damaged.  
Fig. 144 Ignition lock posi-  
tions  
WARNING  
2
When driving, the ignition key must always be in the position A(igni-  
tion switched on) without the engine running. This position is indicated by  
the warning lights coming on. If this is not the case, it could result in unex-  
pected locking of the steering wheel - risk of accident!  
Petrol engines  
1
A - ignition switched off, engine off, the steering can be locked.  
2
A - ignition switched on  
Do not withdraw the ignition key from the lock until the vehicle has come  
to a stop. The steering lock can engage immediately - risk of accident!  
Always withdraw the ignition key if you are going to leave the vehicle,  
3
A - start engine  
Diesel engines  
even for a short time. This is particularly important if children are left in the  
vehicle. The children might otherwise start the engine or switch on electrical  
equipment (e.g. power windows) - risk of accident or injury!  
1
A - interruption of fuel supply, ignition switched off, engine off, the steering can  
be locked.  
2
A - heating glow plugs on, ignition switched on  
You should not switch on any major electrical components during the heating  
period otherwise the vehicle battery will be drained unnecessarily.  
Starting the engine  
3
A - start engine  
General  
Applies to all models:  
You can only start the engine only using an original ignition key.  
1
Position A  
Place the gearshift lever into neutral and put on the handbrake firmly before  
starting the engine.  
The clutch pedal should be fully depressed when starting the engine - the  
starter then only has to crank the engine.  
To lock the steering, with the ignition key withdrawn, turn the steering wheel until  
the steering locking pin is heard to engage. You should always lock the steering as  
a general rule if you leave your vehicle. This acts as a deterrent against possible theft  
of your vehicle ⇒  
.
2
Position A  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
122 Starting-off and Driving  
Let go of the key as soon as the engine starts otherwise there may be damage  
Petrol engines  
to the starter.  
These engines are fitted with a starter system which selects the correct fuel-air  
mixture for every external air temperature.  
The engine running noises may louder at first be louder for a short time after  
starting the cold engine until oil pressure can be built up in the hydraulic valve  
clearance compensation. This is quite normal and is not an operating problem.  
Do not operate accelerator before and when starting engine.  
Interrupt the attempt at starting after 10 seconds if the engine does not start  
right awayand wait for about 30 seconds before repeating the attempt.  
If the engine does not start ...  
You can use the battery of another vehicle as a jump-start aid page 248.  
It is possible that the fuse on the electrical fuel pump is defect if the engine still  
does not start. Check the fuse and replace it if necessary page 252.  
Contact the nearest specialist garage to obtain professional assistance.  
It is only possible to tow-start vehicles fitted with a manual gearbox. The tow-  
starting distance must not be more than 50 metres page 251.  
It may be necessary, if the engine is very hot, to slightly depress the accelerator  
after the engine has started.  
WARNING  
Never run the engine in non ventilated or enclosed areas. The exhaust  
gases of the engine contain besides the odorless and colourless carbon  
monoxide a poisonous gas - hazard! Carbon monoxide can cause uncon-  
sciousness and death.  
Diesel engines  
Glow plug system  
Never leave your vehicle unattended with the engine running.  
Diesel engines are equipped with a glow plug system, the preglow period being  
controlled automatically in line with the coolant temperature and outside temper-  
ature.  
Caution  
3
The starter may only be operated (ignition key position A), if the engine is not  
The preglow indicator light comes on after the ignition has been switched on.  
running. If the starter is immediately operated after switching off the engine, the  
You should not switch on any major electrical components during the heating  
period otherwise the vehicle battery will be drained unnecessarily.  
starter or the engine can be damaged.  
Avoid high engine revolutions, full throttle and high engine loads as long as the  
engine has not yet reached its normal operating temperature - risk of damaging the  
engine!  
You should start the engine immediately after the glow plug warning light   
has gone out.  
The glow plug warning light will come on for about one second if the engine is  
at a normal operating temperature or if the outside temperature is above +5°C. This  
Vehicles which are fitted with an exhaust gas catalytic converter should not be  
tow-started over a distance of more than 50 metres.  
means that you can start the engine right away.  
Interrupt the attempt at starting after 10 seconds if the engine does not start  
right awayand wait for about 30 seconds before repeating the attempt.  
It is possible that the fuse on the diesel preglow system is defect if the engine  
still does not start. Check the fuse and replace it if necessary page 252.  
Contact the nearest specialist garage to obtain professional assistance.  
For the sake of the environment  
Never warm up the engine when the vehicle is standing. Drive off right away.  
Through this the engine reaches its operating temperature more rapidly and the  
pollutant emissions are lower.  
Starting-off and Driving 123  
Starting the engine after the fuel tank has run dry  
Shifting (manual gearbox)  
It may take longer than normal to start the engine after refuelling if the fuel tank has  
run completely dry - up to one minute. This is because the fuel system must first of  
all be filled while the attempting to start the engine.  
Switching off the engine  
The engine can be switched off by turning the ignition key from posi-  
1
tion A into page 121, fig. 144.  
Fig. 145 The shift pattern: 5-  
speed or 6-speed manual  
gearbox  
WARNING  
Never switch off the engine before the vehicle is stationary - risk of acci-  
dent!  
Shift into reverse only when the vehicle is stationary. Depress the clutch pedal and  
hold it fully depressed. Wait a moment before engaging reverse gear in order to  
avoid any shift noises.  
The brake booster only operates when the engine is running. Greater  
physical effort for braking is required when engine is switched off. Because  
if you do not stop as normal, this can cause an accident and severe injuries.  
The reversing lights will come on once reverse gear is engaged, provided the igni-  
tion is on.  
Caution  
WARNING  
you should not switch the engine off right away at the end of your journey after the  
engine has been operated for a lengthy period at high loads but should be allowed  
it to run at idling speed for about 2 minutes. This prevents any accumulation of heat  
when the engine is switched off.  
Never engage the reverse gear when driving - risk of accident!  
Note  
One should not lay the hand on the shift lever while driving the vehicle. The  
pressure of the hand will be transferred to the gearshift forks in the gearbox. This  
can, over a period of time, lead to early wear of the gearshift forks.  
Note  
The radiator fan may continue running for a further 10 minutes or so after the  
engine and the ignition have been switched off. The coolant fan may, however, also  
switch on again after some time if the coolant temperature rises because of an  
accumulation of heat in the engine or if the engine is warm and the engine  
compartment is additionally heated by strong sunlight.  
Depress the clutch pedal fully when changing gears, in order to avoid unneces-  
sary wear and damage.  
This is why particular care is required when carrying out any work in the engine  
compartment page 219, “Working in the engine compartment”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
124 Starting-off and Driving  
Handbrake  
WARNING  
Please note that the handbrake must be fully released. A handbrake  
which is only partially released can result in the rear brakes overheating  
which will have a negative effect on the operation of the brake system - risk  
of accident! In addition this can result in premature wear of the rear brake  
pads.  
Never leave children unattended in the vehicle. The children might, for  
example, release the handbrake or take the vehicle out of gear. The vehicle  
might then move off - risk of accident!  
Fig. 146 Centre console:  
Handbrake  
Caution  
Each time the vehicle is parked, first of all apply the handbrake and then addition-  
ally engage the 1st gear.  
Applying the handbrake  
Pull the handbrake lever up fully.  
Rear parking aid*  
Releasing the handbrake  
The parking aid provides a warning of obstacles behind the vehicle.  
Pull the handbrake lever up slightly and at the same time press in the  
locking button fig. 146.  
Hold the button pressed and push the handbrake lever down fully  
.
The handbrake warning light lights up when the handbrake is applied, provided  
the ignition is on.  
A warning signal sounds and the following text appears in the display* if you have  
inadvertently driven off with the handbrake applied:  
Fig. 147 Parking aid: Detec-  
tion range of rear sensors  
Handbrake on  
The handbrake warning is activated if you drive at a speed of more than 6 km/h for  
more than 3 seconds.  
The audible parking aid determines the distance between the rear bumper and an  
obstacle located behind the vehicle with the aid of ultrasound sensors. The tones  
of the parking aid can be adapted in the menu of the information display*  
page 30. The sensors are integrated in the rear bumper.  
Starting-off and Driving 125  
Range of sensors  
WARNING (continued)  
The clearance warning begins at a distance of about 160 cm from the obstacle (area  
people who wear such clothing are not recognised by the sensors of the  
parking aid.  
A
A page 124, fig. 147). The interval between the warning signals becomes  
shorter as the clearance is reduced.  
B
A continuous tone sounds from a distance of approx. 30 cm (area A) - danger area.  
You should not reverse any further after this signal sounds! If the vehicle is  
equipped with a factory-fitted towing device*, the border of the danger area starts,  
continuous tone, 5 cm further behind the vehicle. The vehicle can be extended  
through an installed detachable towing device.  
Note  
The parking aid does not operate if you are towing a trailer (applies to models  
which feature a factory-fitted towing device*).  
If a warning signal sounds for about 3 seconds after switching the ignition on  
and engaging reverse gear, and there is no obstacle close to your vehicle, this indi-  
cates a system fault. Have the fault rectified by a specialist workshop.  
On vehicles equipped with a factory-fitted radio* or navigation system*, the  
distance to the obstruction is shown graphically in the display. On vehicles with a  
factory-fitted towing device, the sensors are deactivated when towing a trailer. The  
driver is informed about this by a graphic display (vehicle towing a trailer) in the  
radio* or the navigation* display. The radio* or navigation system*, which is  
factory-fitted, can be set so that the play function volume decreases when acti-  
vating the parking aid, see Owner's Manual radio* or navigation system*. This  
improves the audibility of the parking aid.  
The sensors must be kept clean and free of ice to enable the parking aid to  
operate properly.  
Front and rear parking aid*  
The parking aid provides a warning of obstacles in front and behind  
the vehicle.  
Activating  
The parking aid is activated automatically when reverse gear is engaged and the  
ignition is turned on. This is confirmed by a brief acknowledgement signal.  
Deactivating  
The parking aid is deactivated by removing the reverse gear.  
WARNING  
The parking aid is not a substitute for the driver paying proper attention  
and it is always the driver's responsibility to take care when parking the  
vehicle or carrying out similar manoeuvres.  
Fig. 148 Activating the  
parking aid  
You should therefore satisfy yourself, before reversing, that there is no  
small obstacle, such as a rock, thin post, trailer drawbar etc., behind your  
vehicle. Such an obstacle might not be within the range detected by the  
sensors.  
Under certain circumstances, surfaces of certain objects and types of  
clothing cannot reflect the signal of the parking aid. Thus, these objects or  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
126 Starting-off and Driving  
Activating  
The parking aid is activated when the reverse gear is engaged and the ignition is  
turned on or by pressing the button page 125, fig. 148 - the symbol  
lights up  
in the button. The activation is confirmed by a brief acknowledgement signal.  
Deactivating  
The parking aid is deactivated after pressing the button°  
page 125, fig. 148 or  
at a speed of more than 10 km/h - the symbol in the button is no longer illumi-  
nated.  
Fig. 149 Parking aid: Detec-  
tion range of the front  
sensors  
WARNING  
The audible parking aid determines the distance between the front or rear bumper  
and an obstacle with the aid of ultrasound sensors. The sensors are integrated in the  
front and rear bumper. The signal tones for the front parking aid sound higher as  
standard than for the rear parking aid. The tones of the parking aid can be adapted  
in the menu of the information display* page 30.  
The parking aid is not a substitute for the driver paying proper attention  
and it is always the driver's responsibility to take care when reversing the  
vehicle or carrying out similar manoeuvres.  
You should therefore satisfy yourself, before reversing, that there is no  
small obstacle, such as a rock, thin post, trailer drawbar etc., in front or  
behind your vehicle. Such an obstacle might not be within the range  
detected by the sensors.  
Range of sensors  
The distance warning begins at a distance of about 120°cm from the obstacle in  
Under certain circumstances, surfaces of certain objects and types of  
A
front of the vehicle (area A fig. 149) and about 160 cm from the obstacle  
clothing cannot reflect the signal of the parking aid. Thus, these objects or  
people who wear such clothing are not recognised by the sensors of the  
parking aid.  
A
behind the vehicle (area A) page 124, fig. 147. The interval between the  
warning signals becomes shorter as the clearance is reduced.  
B
A continuous tone sounds from a distance of approx. 30 cm (area A) - danger area.  
From this moment on do not continue driving! If the vehicle is equipped with a  
factory-fitted towing device*, the border of the danger area starts - continuous  
tone - 5 cm further behind the vehicle. The vehicle can be extended through an  
installed detachable towing device.  
Note  
Only the front parking aid operates if you are towing a trailer (applies only to  
models which feature a factory-fitted towing device*).  
On vehicles equipped with a factory-fitted radio* or navigation system*, the  
distance to the obstruction is shown graphically in the display. On vehicles with a  
factory-fitted towing device, the rear sensors are deactivated when towing a trailer.  
The driver is informed about this by a graphic display (vehicle towing a trailer) in the  
radio* or the navigation* display. The radio* or navigation system*, which is  
factory-fitted, can be set so that the play function volume decreases when acti-  
vating the parking aid, see Owner's Manual radio* or navigation system*. This  
improves the audibility of the parking aid.  
If a warning signal sounds for about 3 seconds after activating the system and  
there is no obstacle close to your vehicle, this indicates a system fault. The fault is  
confirmed additionally when the symbol  
flashes in the button page 125,  
fig. 148. Have the fault rectified by a specialist workshop.  
The sensors must be kept clean and free of ice to enable the parking aid to  
operate properly.  
Starting-off and Driving 127  
Park Assist*  
Caution  
If other vehicles are parked behind or on the kurb, the park assist guides your  
vehicle beyond the kurb or onto it. Make sure that the wheels or the wheel rims of  
your vehicle are not damaged and if necessary intervene in time.  
Description and important information  
The park assist assists you when parking in a suitable parallel parking space  
between two vehicles or behind a vehicle.  
You should satisfy yourself before parking that there is no small obstacle, such  
as a rock, thin post, trailer drawbar etc., in front or behind your vehicle. Such an  
obstacle might not be within the range detected by the sensors.  
The park assist automatically searches for suitable parking spaces after switching  
on the ignition and when driving up to 30 km/h.  
Under certain circumstances, surfaces or structures of certain objects such as  
wire mesh fences, powder snow etc..., cannot be recognised by the system.  
The evaluation of the parking space and the parking procedure depends on the  
circumference of the wheels. The system does not function correctly if your vehicle  
is mounted with wheels of non-permissible size, snow chains or a temporary spare  
wheel (in order to reach the nearest workshop). If the tyres other than those  
excepted by the manufacturer are mounted, the resulting position of the vehicle in  
the parking space can differ slightly. This can be avoided through new calibration of  
the system in a specialist garage.  
During the parking procedure the park assist only takes over the steering move-  
ments, the pedals continue to be operated by the driver.  
Function of the system is based on:  
Length and depth measurement of the parking spaces when driving  
Evaluation of the size of the parking space  
Definition of the correct position of the vehicle for parking  
Calculating the line on which the vehicle drives backwards into the parking  
space  
The accuracy of the evaluation for the parking space can be influenced by the  
incorrectly determined outside temperature if the later is influenced by the thermal  
radiation of the engine i.e for stop and go in a traffic jam.  
Actuation of the steering force assistance, automatic spinning of the wheels of  
the front axle when parking.  
In order to avoid damaging the sensors while cleaning with high-pressure  
cleaners or steam jets, the sensors must only be directly sprayed for short periods  
while a minimum distance of 10 cm must be observed.  
WARNING  
The park assist does not take away the responsability from the driver when  
parking.  
Note  
Pay particular attention to small children and animals as they would not  
be recognised by the sensors of the parking aid.  
Under certain circumstances, surfaces of certain objects and types of  
A component of the park assist is the front and rear parking aid*.  
The electronic stability programme (ESP*) must always be switched on for the  
parking procedure.  
clothing cannot reflect the signal of the park assist or the parking aid. Thus,  
these objects or people who wear such clothing are not recognised by the  
sensors of the parking aid.  
Only the front parking aid operates if you are towing a trailer (applies only to  
models which feature a factory-fitted towing device*). This is why it is not possible  
to park backwards with the help of the park assist when towing a trailer.  
The external sound source of the park assist and the parking aid can be  
disruptively influenced and under unfavourable conditions, objects or  
people cannot be recognised by the sensors of the parking aid.  
The sensors must be kept clean and free of ice to enable the parking aid to  
operate properly.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
128 Starting-off and Driving  
Switch on display of the park assist in the information display*  
Note  
If the park assist is switched on, a yellow warning light lights up in the button.  
The search for suitable parking spaces is automatic after switching on the igni-  
tion at speeds of more than 30 km/h. Searching for a parking space is performed at  
the same time on the driver and front passenger side.  
If the sensors find a suitable parking space, they store its parameters until  
another suitable parking space has been found or until a distance of 10 m had been  
driven after finding the parking space. This is why it is possible to switch on the park  
assist after driving past the parking space, the information on whether this parking  
space is suitable for parking appears in the information display*.  
Fig. 150 Switching on the  
park assist  
Parking with the help of the park assist and concluding the  
parking procedure  
Fig. 151 Information  
display: Finding a suitable  
parking space  
Fig. 152 Information  
display: the determined  
parking space with the infor-  
A
mation to drive on Aand for  
Switch on display of the park assist in the information display*  
B
engaging the reverse gear A  
Press the button fig. 150.  
Drive past the parking row up to maximum 30 km/h and with a  
distance of 0.5 m to 1.5 m fig. 151.  
Operate the turn signal for the driver's side if you wish to park on this side of the  
road. In the information display* the search area for the parking space is indicated  
on the driver's side.  
If the button is pressed above a speed of 30 km/h, the display appears in the display  
of the instrument cluster as soon as you drive slower than 30 km/h.  
Starting-off and Driving 129  
If the backward arrow flashes in the information display* fig. 153  
D
A, engage the reverse gear and carefully drive backwards. You can  
repeat these steps several times.  
End the parking procedure from a distance on the basis of the infor-  
mation of the system.  
As soon as the parking procedure is completed, an audible signal sounds and in the  
information display* the following message appears: Steering intervention  
finished! Please take over steering! .  
Fig. 153 Information  
display: Information for  
engaging the forward gear  
C
D
Aor the reverse gear A  
If your vehicle is not properly parked, the position of the wheels is corrected by the  
system after disengaging the reverse gear when your vehicle is stationary, so that  
you can align the vehicle yourself during a forward movement after taking over the  
steering.  
The time limit for the parking procedure with the help of the park assist  
lasts 180 seconds.  
Switch off park assist  
If the park assist has recognised a suitable parking space, it is shown in  
A
the information display* page 128, fig. 152 A.  
The park assist switches off during one of the following occurences:  
A speed of 30 km/h exceeded  
B
Drive on further until the display page 128, fig. 152 A appears.  
A speed of 7 km/h exceeded during the parking procedure  
A time limit of 180 seconds exceeded for engaging the reverse gear after  
switching on the park assist.  
Bring the vehicle to a stop for at least 1 second.  
Engage reverse gear.  
A time limit of 180 seconds exceeded for the parking procedure  
The button pressed for the park assist  
As soon as the following message is shown in the information  
display*: Steering intervention! Monitor area around veh.! , let go  
of the steering wheel, the steering will be taken over by the system.  
Parking aid activated  
Intervention of the driver in the automatic steering procedure (stop the steering  
Observe the surroundings and drive backwards with a speed of  
maximum 7 km/h, at the same time operate the pedal.  
wheel)  
Disengage the reverse gear during the parking procedure.  
In the event that the parking procedure cannot be carried out in one  
go, proceed to parking in further stages. If the forward arrow flashes in  
the information display* fig. 153 A, engage the forward gear.  
Further warning and information texts of the park assist in the information  
display*:  
C
Park Assist cancelled!  
Observe the surroundings and drive forwards with a speed of  
maximum 7 km/h.  
The parking procedure has ended or after switching on the ignition, the vehicle has  
not been driven above 10 km/h.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
130 Starting-off and Driving  
Park Assist: Speed too high!  
Please take over steering! Finish parking manually  
Reduce the speed below 30 km/h.  
Take over the steering. End the parking procedure without using the park assist.  
Driver steering intervention! Please take over steering!  
Speed too high! Please take over steering!  
The parking procedure is ended through driver intervention.  
The parking procedure was ended while the speed was exceeded.  
Park Assist cancelled! ESP switched off!  
Park Assist: ESP Intervention!  
The parking procedure cannot be carried out because the ESP system is switched  
off.  
Intervention of the ESP system while searching for a suitable parking place.  
ESP intervention! Please take over steering!  
ESP switched off! Please take over steering!  
Parking procedure is ended through the intervention of the ESP system.  
The parking procedure was ended because the ESP system was switched off during  
the parking procedure.  
Park Assist: Stationary time not sufficient.  
The stationary time of the vehicle was less than 1 second.  
Park Assist cancelled! Trailer  
Park Assist: Speed too low!  
The parking procedure is not possible because the trailer is hitched and a plug is  
inserted in the socket of the towing device.  
After the ignition is switched on, the vehicle must exceed the speed of 10 km/h at  
least once.  
Park Assist cancelled! Time limit exceeded  
The parking procedure was not started because a time limit of 180 seconds for  
engaging the reverse gear was exceeded.  
Cruise control system (CCS)*  
Time limit exceeded! Please take over steering!  
Introduction  
The parking procedure was ended because a time limit of 180 seconds for parking  
was exceeded.  
The cruise control system (CCS) maintains a constant speed, more than 30 km/h (20  
mph), once it has been set, without you having to depress the accelerator pedal.  
This is only possible within the range which is permitted by the power output and  
braking power of the engine. The cruise control system makes it possible - particu-  
larly on long journeys - for you to rest your “accelerator foot”.  
Park Assist cancelled! System error  
The parking procedure is not possible because a fault exists on the vehicle. Have the  
fault rectified by a specialist workshop.  
Park Assist defective! Service now!  
The parking procedure is not possible because a fault exists on the park assist. Have  
the fault rectified by a specialist workshop.  
WARNING  
The cruise control system must not, for safety reasons, be used in dense  
traffic or on unfavourable road surfaces (such as icy roads, slippery roads or  
loose chippings) - risk of accident!  
Steering intervention! Monitor area around veh.!  
The park assist is active and takes over the steering movements. Observe the  
surroundings and carefully drive backwards, at the same time operate the pedal.  
Starting-off and Driving 131  
B
After you have released the rocker button Aout of the position SET, the speed you  
have just stored is maintained at a constant speed without having to depress the  
accelerator.  
WARNING (continued)  
In order to prevent unintentional use of the cruise control system, always  
switch off the system after use.  
You can increase the speed by depressing the accelerator. Releasing the acceler-  
ator will cause the speed to drop again to the set speed.  
This does not apply, however, if you drive at a speed which is more than 10 km/h  
higher than the set speed for a period of longer than 5 minutes. The stored speed  
will be cancelled in the memory. You then have to re-store the desired speed.  
Note  
Models fitted with a manual gearbox: Always depress the clutch pedal if you  
switch on the cruise control system when the gearbox is in Neutral. Otherwise the  
engine can rev up unintentionally.  
One can reduce the speed in the usual manner. The system is switched off tempo-  
rarily by actuating the brake or clutch pedal page 132.  
The cruise control system is not able to maintain a constant speed when driving  
on steep downhill sections. The weight of the vehicle increases the speed at which  
it travels. One should shift down in good time to a lower gear or slow the vehicle  
down by applying the foot brake.  
WARNING  
First ensure that it is not too high for the traffic conditions which exist at that  
moment before resuming the stored speed.  
Storing a speed  
Changing a stored speed  
You can also change the speed of the vehicle without depressing the  
accelerator.  
Faster  
You can increase the stored speed without depressing the acceler-  
B
ator, by pressing the rocker button A fig. 154 in the RES position.  
Fig. 154 Operating lever:  
Rocker button and switch of  
cruise control system  
The speed of the car will increase continuously if you hold the rocker  
button pressed in the RES position. Once the car has reached the  
desired speed, release the rocker button. The set speed is then stored  
in the memory.  
A
The cruise control system is operated by means of the switch A and  
B
rocker button A in the left lever of the multi-functional switch.  
Slower  
A
Press the switch A fig. 154 into the position ON.  
B
You can decrease the stored speed by pressing the rocker button A  
in the SET position.  
B
After the desired speed has been reached, press the rocker button A  
into the SET position.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
132 Starting-off and Driving  
Holding down the rocker button pressed in the SET position will cause  
the speed of the vehicle to reduce continuously. Once the car has  
reached the desired speed, release the rocker button. The set speed is  
then stored in the memory.  
If you release the rocker button when the car is travelling at a speed of  
less than 30 km/h, the speed is not stored, the memory is erased. It is  
B
then necessary to again store the speed with the rocker button A in  
the position SET after an increase in speed of the vehicle to more than  
30 km/hour.  
Switching off the cruise control system temporarily  
You can switch off temporarily the cruise control system, if you  
depress the brake or clutch pedal.  
You can switch off temporarily the cruise control system, if you press  
A
the switch A in the middle position.  
The set speed remains stored in the memory.  
You can resume the stored speed by releasing the brake or clutch pedal and by  
B
briefly pressing the button A page 131, fig. 154 in the position RES.  
WARNING  
First ensure that it is not too high for the traffic conditions which exist at that  
moment before resuming the stored speed.  
Switching off the cruise control system completely  
A
Press the switch A page 131, fig. 154 to the right into position  
OFF.  
Communication 133  
Communication  
Multifunction steering wheel*  
Operate radio und navigation on the multifunction steering wheel  
Fig. 155 Multifunction  
steering wheel: control  
buttons  
The driver can set the basic functions of the radio and navigation by simply oper-  
ating the buttons located on the steering wheel so that he can concentrate on the  
traffic situation without being distracted as little as possible by operating the radio  
and navigation fig. 155.  
9)  
This applies only if your vehicle has been installed with radio or navigation system  
at the factory. You can of course operate the radio and navigation at the appliance.  
You will find a description in the operating instructions of your radio.  
When the headlights are switched on, the steering wheel pushbuttons are then also  
illuminated.  
The buttons apply for the respective operating mode of the current radio or naviga-  
tion system.  
By pressing the buttons, you can carry out the following functions.  
9)  
Does not apply for Radio Blues.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
134 Communication  
But-  
ton  
Action  
Radio, traffic information  
CD  
The CD changer / MP3  
Navigation  
press briefly  
press button for a long period of time  
turn upwards  
Switch off/on tone  
switch off/on*  
1
A
1
A
Increase volume  
Decrease volume  
1
A
turn downwards  
1
A
Changing to the next stored radio station  
Changing to the next stored traffic information  
Interrupting the traffic report  
Changing to the next title  
fast forward  
press briefly  
press button for a long time  
press briefly  
2
A
Interruption of the traffic report  
2
A
Changing to the previously stored radio station  
Changing to the previously stored traffic information  
Interrupting the traffic report  
Changing to the previous title  
fast rewind  
3
A
Interruption of the traffic report  
press button for a long time  
3
A
Changing the audio source  
4
A
press briefly  
press button for a long time  
press briefly  
5
A
Calling up the main menu  
5
A
6
A
Interruption of the traffic report  
without function  
press button for a long period of time  
6
A
Display of the station list  
scroll upwards  
Interruption of the traffic reports  
Changing to the previous title  
turn upwards  
6
A
without function  
Display of the station list  
scroll downwards  
Changing to the next title  
turn downwards  
6
A
Interruption of the traffic report  
Communication 135  
Mobile phones and two-way radio systems  
Note  
Please also refer to the operating instructions of the mobile phones and two-way  
radio systems.  
The installation of a mobile phone and two-way radio system in a vehicle should be  
carried out by a specialist garage.  
Škoda Auto permits the operation of mobile phones and two-way radio systems  
with a professionally installed external aerial and a maximum transmission power  
of up to 10 watts.  
Universal telephone preinstallation GSM II*  
It is essential that you inform a specialist garage about the possibilites to assemble  
and operate mobile phones and two-way radio sets which have a power output of  
more than 10 W. They will inform you which technical possibilities exist for retrofit-  
ting mobile telephones and radio transmitters.  
Introduction  
This enables you to make full use of the advantages of a normal carphone (“hands-  
free system - Hands Free” using a microphone integrated in the vehicle, optimal  
transmission of signals using an external aerial etc.). The equipment includes  
10)  
Operation of mobile phones or two-way radio systems may interfere with func-  
tioning of the electronic systems of your vehicle. The reasons for this may be:  
®
also the voice control. The telephone is connected by means of the Bluetooth  
technology page 136, “Bluetooth®”. On vehicles fitted with a telephone  
no external aerial,  
mount*, it is also possible to establish the connection via the interface of the  
external aerial incorrectly installed,  
transmission power greater than 10 watts.  
11)  
adapter page 138, “Operating telephone calls with the aid of the adapter*.”.  
A phone phonebook is part of the mobile phone preinstallation with voice control.  
In the phone phonebook there are 1 500 free memory locations available. This  
phone phonebook is independent of the appliance used for the mobile phone.  
You should also be aware of the fact that only an external aerial makes it possible  
to achieve the optimal range of such equipment.  
Furthermore the volume can be changed individually during the call at any time  
with the button for setting the radio* or on vehicles fitted with multifunction  
steering wheel* with function buttons on the steering wheel.  
WARNING  
If a mobile phone or a two-way radio system is operated in the vehicle  
If the system answers with the voice response “Telephone is not ready”, please  
check the operating state of the telephone as follows:  
without using a special external aerial or an external aerial which has been  
incorrectly installed, this can increase the strength of the electromagnetic  
field in the interior of the vehicle.  
Is the telephone switched on?  
Is the PIN code entered?  
Please concentrate fully at all times on your driving!  
You must not install two-way radio systems, mobile phones or mounts  
Dialogue  
on the covers of the airbags or within the immediate deployment range of  
airbags. This might result in injuries to the occupants in the event of an acci-  
dent.  
The period, in which the telephone system is ready to receive voice commands and  
carry out the voice commands, is called DIALOGUE. The system gives audible feed-  
back and guides you if necessary through the relevant functions. You can start or  
10)  
Valid for telephone used with adapter* in the telephone mount.  
Not valid for adapter “Bluetooth only” page 138.  
11)  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
136 Communication  
end the dialogue at any time by pressing the PTT button on the adapter*  
Caution  
page 138 or on the multifunction steering wheel* page 139.  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
The dialogue is always automatically ended after carrying out an operation, e.g.  
after erasing the name from the phonebook.  
When receiving an incoming call, the dialogue is immediately interrupted and you  
can accept the call by pressing the button°on the multifunction steering wheel*  
page 139 or by pressing the button for receiving a call directly on your tele-  
phone.  
Note  
Please also refer to the additional instructions page 135, “Mobile phones  
and two-way radio systems”.  
If a voice command is not detected, the system answers with “Sorry?” and a new  
entry can be performed. After the 2nd error the system repeats the aid. After the 3rd  
error the answer “Cancel” is given and the dialogue is ended.  
Should you have any questions, please contact a Škoda Service Partner.  
Optimum understanding of the voice commands depends on the following  
factors:  
®
Bluetooth  
Speak with a normal tone of voice without intonation and excessive voice  
pauses.  
®
The Bluetooth technology serves as cableless connection of a  
mobile phone to a hands-free system of your vehicle.  
Avoid insufficient articulation.  
Close the doors, windows and sliding roof, in order to reduce or stop disturbing  
®
In order to connect a mobile phone with Bluetooth to the hands-free  
system, it is necessary to adapt the phone and the hands-free system to  
each other. Detailed information on this is provided in the operating  
instructions of your mobile phone. The following steps must be carried  
out for the connection:  
exterior noise.  
It is recommended to speak louder at higher speeds, so that the tone of your  
voice is louder than the increased surrounding noise.  
During the dialogue avoid additional noise in the vehicle, e.g. simultaneously  
talking occupants.  
Switch on the ignition.  
Do not speak, if the system makes an announcement.  
®
Select Bluetooth on the mobile phone and select the menu with  
which the mobile phone searches for suitable Bluetooth devices.  
The microphone for voice control is directed to the driver and front passenger.  
®
Therefore the driver and the front passenger can operate the equipment.  
If the hands-free system on the display of the mobile phone  
announces Skoda UHV, enter the PIN°1234 within 30 seconds and  
wait, until the connection is established.  
WARNING  
12)  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time.  
Some mobile phones have a menu, in which the authorization for establishing a Bluetooth®  
connection is performed via the input of a code. If the input for the authorization is neces-  
sary, it must always be performed when re-establishing the Bluetooth connection.  
12)  
Communication 137  
While connecting the mobile phone with the hands-free system by means of Blue-  
Please operate your mobile phone exclusively with a suitable adapter in order  
to keep a low radiation in the vehicle.  
®
tooth , no other phone can be connected with the hands-free system via Blue-  
®
tooth  
.
Inserting the mobile phone into the adapter ensures an optimal sending and  
receiving power and offers at the same time the advantage of the battery charging.  
Up to three mobile phones can be connected to the hands-free system by means  
®
®
®
of Bluetooth , whereby only one mobile phone can communicate via Bluetooth  
Note that the range of the Bluetooth connection to the handsfree-system is  
with the hands-free system. If a fourth mobile phone is connected to the hands-  
limited to the vehicle interior. The range is dependent on local factors, e.g. obstacles  
between the devices and interferences with other devices. If your mobile phone is  
free-system, then the telephone, which has not been used together with the hands-  
®
®
free-system for the longest period, is disconnected by means of Bluetooth  
.
e.g. in a jacket pocket, this can lead to difficulties when establishing the Bluetooth  
connection with the handsfree-system or the data transfer.  
®
Establish Bluetooth connection  
After switching on the ignition, the Bluetooth connection is automatically estab-  
12)  
Inserting the mobile phone with the adapter*  
lished for the already adapted mobile phone . Check on the mobile unit if the  
automatic connection was established.  
®
Disconnect Bluetooth connection  
®
After withdrawing the ignition key, the Bluetooth connection is disconnected.  
WARNING  
Pay attention primarily to the traffic situation! As the driver you are fully  
responsible for road safety. Use the telephone system only to such an extent,  
so that you are in full control of your vehicle at any time - risk of accident!  
Fig. 156 Universal prepara-  
tion for the phone  
®
In the event of air transport, the Bluetooth function of the handsfree-  
system must be switched off by a specialist garage!  
Only one telephone mount* is factory-fitted. An adapter for the phone  
can be purchased from the Škoda original accessories.  
Caution  
Taking the mobile phone out of the adapter during the call can lead to interruption  
of the connection. When taking out the mobile phone, the connection to the  
factory-fitted antenna is interrupted, this reduces the quality of the transmitting  
and receiving signal. The charging of the mobile phone battery is also interrupted.  
Inserting the mobile phone with the adapter  
A
First of all push the adapter A in the direction of arrow fig. 156 up  
to the stop into the mount. Press the adapter slightly downwards, until  
it locks securely into position.  
Note  
A
Insert the mobile phone into the adapter A(as specified in manufac-  
®
Not valid for all mobile phones which enable a communication via Bluetooth  
You can ask at a Škoda Service Partner if your telephone is compatible with the  
universal telephone preinstallation GSM II.  
.
turer's instructions).  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
138 Communication  
®
telephone is connected to the handsfree-system via Bluetooth , this connection is  
interrupted.  
Removing the mobile phone with the adapter  
Press simultaneouly the side locks of the mount and remove the  
mobile phone and adapter page 137, fig. 156.  
Adapter “Bluetooth only”  
For the adapters which are marked with the “Bluetooth only” logo, the complete  
communication between the telephone and the handsfree-system of your vehicle  
is carried out only with the help of the Bluetooth technology. If an adapter marked  
Operating telephone calls with the aid of the adapter*.  
®
in such a way is inserted in the telephone mount, it only serves for recharging the  
battery of the telephone and for transmitting the signal onto the outer vehicle  
aerial.  
Aside from the button PTT, the button SOS can be found on certain adapters  
fig. 158. This button is without function.  
Note  
The adapters illustrated are only prime examples.  
Fig. 157 Illustration image:  
Single-button adapter  
Fig. 158 Illustration image:  
Two-button adapter  
The voice control of the telephone is activated by pressing the button PTT (button  
push to talk) on the adapter fig. 157 or fig. 158.  
If you insert the adapter with the telephone in the telephone mount, the handsfree-  
system connects to the telephone by means of the interface of the adapter. If the  
Communication 139  
Operation of the telephone on the multifunction steering wheel*  
The driver can set the basic functions of the telephone by simply operating the  
buttons located on the steering wheel so that he can concentrate on the traffic situ-  
ation without being distracted as little as possible by operating the telephone  
fig. 159.  
This applies only if your vehicle has been equiped with the telephone preinstalla-  
tion at the factory.  
If the side lights are switched on, the buttons on the multifunction steering wheel  
are illuminated.  
Fig. 159 Multifunction  
steering wheel: Control  
buttons for the telephone  
Overview of the different functions in contrast to the multifunction steering wheel  
without mobile phone operation page 133.  
Button  
Action  
Operation  
Activation and deactivation of the voice control°  
(Button PTT - Push to talk)  
press briefly  
1
A
Increase volume  
Decrease volume  
turn upwards  
turn downwards  
press briefly  
1
A
1
A
Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers  
2
A
press button for a long  
Reject call, entry in the main menu of the telephone, list of selected numbers  
2
A
time  
Reach one level higher in the menu (according to the current position in the menu)  
Return in the main menu of the information display  
press briefly  
3
A
press button for a long  
3
A
time  
press briefly  
Confirm menu selection  
4
A
press button for a long  
period of time  
Confirming the selected menu point, the following initial letters in the telephone book  
4
A
The last chosen menu selection, name  
The next menu selection, name  
turn upwards  
4
A
turn downwards  
4
A
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
140 Communication  
The buttons operate the functions for the operating mode of the current  
telephone.  
Voice commands for mobile phone operation  
Voice command  
Activity  
After this command the PIN code of the mobile  
phone can be entered page 141.  
ENTER PIN/PIN CODE  
DIAL NUMBER  
REDIAL  
Operate the telephone via the information display*  
After this command a telephone number can be  
entered which establishes a connection to the  
requested partner page 141.  
The display of texts in the menu Telephone is possible in the following languages:  
Czech, English, German, French, Italian, Spanish and Russian.  
If you select the menu point Telephone on the information display with the aid of  
After this command the last selected telephone  
number is selected again page 142.  
4
the handwheel A, you can change to the following menus:  
„
„
„
„
Phone book  
Last calls  
Voice commands for operating the phone phone book  
Received calls  
Missed calls  
Voice command  
SAVE/STORE  
Activity  
After this command a name with its telephone  
NAMES/NAME/NUMBE number can be stored in the phone phone book  
Phone book  
R
page 142.  
In the menu point Phone book is the list of the loaded contacts from the telephone  
memory and the SIM card of the mobile phone. In the phone phonebook there are  
1 500 free memory locations available.  
After this command a telephone number which was  
SELECT NAMES/NAME stored under its given name in the phone phone  
book can be selected page 143.  
After this command a name in the phone phone  
DELETE NAMES/NAME  
Voice commands  
book can be erased page 143.  
On vehicles which are factory-fitted with a navigation system* with  
voice control, it is only possible to operate the voice control via the  
navigation system*. The description on how to operate the voice  
control can be found in the operating instructions of your navigation  
system*.  
LISTEN TO/PLAY  
PHONEBOOK  
After this command you can listen-in to the phone  
phone book page 144.  
After this command the complete phone book or a  
name can be erased page 144.  
DELETE PHONEBOOK  
The voice control is possible in the following languages:  
Czech, English, German, French, Italian and Spanish.  
Communication 141  
Other possible commands  
the mobile phone is switched on.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
After each order of digits (separation through brief voice pause) the detected digits  
are repeated.  
Voice command  
DIAL  
Activity  
The telephone number is selected.  
In addition to the name in the phone book, which is  
selected on the information display, a voice recording  
is stored to select with the help of the voice com-  
mands or the entered PIN code.  
Notes for entering the PIN code  
STORE  
When entering a PIN code with more than 8 digits, the system indicates “The  
PIN is too long”.  
When entering an incorrect PIN code, the system indicates “The PIN is incor-  
rect”.  
The entered name or the digits are repeated. Then the  
system requests with voice response “please pro-  
ceed” the entry of further digits or commands.  
REPEAT  
If the incorrect PIN code has been entered three times consecutively, the card  
The entered name or the last entered order of digits is  
erased. Previously entered groups of digits are  
repeated. Then the system requests with voice  
response “please proceed” the entry of further digits  
or commands.  
is blocked. With the aid of the personal unblocking code PUK (Personal Unblock  
Key), the SIM card can be unblocked. The unblocking code can only be entered  
via the phone keypad and not through the voice control.  
BACK  
Example for entering the PIN code  
All entered digits are erased. Then the system  
requests with voice response “The number is  
deleted. The number please” the entry of further  
digits or commands.  
Voice command  
Announcement  
DELETE  
ENTER PIN/PIN CODE  
e.g. ZERO ONE TWO THREE  
The PIN please”.  
Zero One Two Three”.  
CANCEL  
The dialogue is ended.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Possible commands are: store, repeat,  
correct, delete or more digits”.  
Enter PIN code  
The PIN is saved”.  
(end of dialogue)  
STORE  
A PIN code must be entered before operating the system.  
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command ENTER PIN/PIN CODE after the signal tone.  
After this command the PIN code can be entered.  
The entry of the PIN code is only possible if:  
Dial number  
the ignition is switched on;  
Press the PTT button.  
the mobile phone is in the mount;  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
142 Communication  
After giving this command, the last number selected via voice input is selected  
again.  
Give the command DIAL NUMBER after the signal tone.  
After giving this command, the system requests the entry of a telephone number.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
Example of redial  
Voice command  
REDIAL  
Announcement  
The number is being dialed”.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally for international calls a Plus (+) has to be entered in front of the 20  
digits.  
Phone voice phonebook*  
Example when entering a telephone number  
Store name  
Voice command  
Announcement  
Press the PTT button.  
DIAL NUMBER  
The number please”.  
Zero Six Zero Three”.  
Give the command SAVE/STORE NAMES/NAME/NUMBER after the  
signal tone.  
e.g. ZERO SIX ZERO THREE  
If no entry is put in, the following announcement is made after about 5 seconds.  
After giving this command, the system requests the entry of a name and a tele-  
phone number which should be stored in the phone voice phonebook. In the  
phone voice phonebook up to 50 entries can be stored.  
Possible commands are: dial, repeat,  
correct, delete or more digits”.  
FIVE SEVEN TWO  
DIAL  
Five Seven Two”.  
The telephone number can be entered as an interconnected spoken row of digits  
(complete number), in the form of order of digits (separation through a brief voice  
pause) or through individually spoken digits. After each order of digits (separation  
through brief voice pause) the detected digits are repeated.  
The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
The digits zero to nine are permitted. The system detects no continuous digit  
combinations such as twenty-three, but only individually spoken digits (two, three).  
Repeat last call  
If you enter more than 20 digits, the system announces: “The number is too long”.  
Additionally a Plus (+) has to be entered in front of the 20 digits.  
Press the PTT button.  
The stored entry is shown on the information display* with an asterisk in front of  
the name.  
Give the command REDIAL after the signal tone.  
For similar names additional information (e.g. first names) should be stored.  
Communication 143  
Example for selecting an entry out of the phone voice phonebook  
Example for storing in the phone voice phonebook  
Voice command  
Announcement  
Voice command  
Announcement  
The name please”.  
Company xyz”.  
SAVE/STORE  
NAMES/NAME/NUMBER  
SELECT NAMES/NAME  
COMPANY XYZ  
The name please”.  
COMPANY XYZ  
Please repeat the name”.  
The number please”.  
Zero One Two Three”.  
Four Five Six”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
COMPANY XYZ  
Possible commands are: dial, repeat, correct”.  
ZERO ONE TWO THREE  
FOUR FIVE SIX  
DIAL  
The number is being dialed”.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Possible commands are: store, repeat, correct,  
delete or more digits”.  
Delete names  
STORE  
The name COMPANY XYZ is stored”.  
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command DELETE NAMES/NAME after the signal tone.  
After giving this command, there is the possibility to erase a stored entry in the  
phone voice phone book.  
Select name  
Press the PTT button.  
Example for erasing an entry out of the phone phonebook  
Give the command DIAL/SELECT NAMES/NAME after the signal  
Voice command  
Announcement  
tone.  
DELETE NAMES/NAME  
The name please”.  
After giving this command, there is the possibility to select a stored entry out of the  
phone voice phonebook.  
Do you want to delete the entry Company  
xyz?”.  
COMPANY XYZ  
YES  
Delete?”.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Possible commands are: yes, no, repeat, cor-  
rect”.  
YES  
The name is deleted”.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  
144 Communication  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
Example for erasing individual names out of the phone phonebook  
voice command CANCEL.  
Voice command  
Announcement  
If the user answers with NO, the system answers with “Cancel” and the dialogue is  
Do you want to delete the whole  
phonebook?”  
ended.  
DELETE PHONEBOOK  
If no entry is put in, the following announcement is made after about 5 seconds.  
Delete voice phonebook  
Possible commands are: yes, no,  
repeat”.  
Press the PTT button.  
NO  
The phonebook is read out.  
Give the command DELETE PHONEBOOK after the signal tone.  
When announcing the entry to be  
erased, press the PTT button.  
Do you want to delete (name)?”  
After giving this command there is the possibility to erase the complete phone  
voice phone book or the individually stored names out of the phone phone book.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Example for erasing the complete phonebook  
Possible commands are: yes, no”.  
YES  
The name is deleted”.  
Voice command  
Announcement  
Continue reading out the phone book.  
Do you want to delete the whole  
phonebook?”.  
DELETE PHONEBOOK  
As long as the phonebook is read out, other entries can be erased by pressing the  
PTT button.  
If no entry is put in, the following announcement is made after about 5 seconds.  
Possible commands are: yes, no,  
repeat”.  
You can end the dialogue at any time with the voice command CANCEL.  
YES  
YES  
Are you sure?”.  
Listening-in to the phonebook  
The phonebook is deleted”.  
Press the PTT button.  
You can interrupt the dialogue at any time by pressing the PTT button or with the  
voice command CANCEL.  
Give the command LISTEN TO/PLAY PHONEBOOK after the signal  
tone.  
After giving this command the phone voice phone book is read out by the system.  
By pressing the PTT button when announcing the desired name, the corresponding  
telephone number is being dialed; the system answers: “The number is being  
dialed”.  
Communication 145  
Loading a CD  
Inputs AUX-IN* and MDI*  
A
Press on the button A and insert the CD (compact disc) into the CD  
The input AUX-IN is located below the armrest* of the front seats and is marked  
with .  
B
case A. The CD is automatically loaded onto the next free position in  
D
the CD-changer. The LED in the corresponding button A stops  
flashing.  
The input MDI is located in the front centre console.  
The inputs AUX-IN and MDI transmit audio signals from connected external audio  
sources (e. g. iPod or mp3 player) and record music from these devices via your  
radio* or your navigation system* installed in the factory.  
Load CDs  
A
Hold the button A pressed and guide the CDs one after the other  
(maximum 6 CDs) into the CD case A. The LEDs in the buttons A  
B
D
The description of the operation can be found in the relevant Owner's Manual of  
your radio* or your navigation*.  
are no longer flashing.  
Loading a CD to one definite position  
Note  
A
D
Press on the button A. The LEDs in the buttons A light up at the  
The loudspeakers in the vehicle are matched to a power output of the radio and  
navigation system of 4x 20°W.  
For the equipment sound system*, the loudspeakers are matched to a power  
memory spaces, which are already assigned and flash in the case of  
free memory spaces.  
D
B
Touch the desired button A and guide the CD into the CD-case A.  
output of the amplifier of 4x40°W + 6x20 W.  
Ejecting a CD  
CD changer*  
C
Briefly press on the button A, in order to eject a CD. For assigned  
D
memory spaces, now the LEDs light up in the buttons A.  
D
Touch the corresponding button A. The CD is ejected.  
Ejecting all CDs  
C
Hold the button Apressed for more than 2 seconds, in order to eject  
the CDs. All CDs in the CD-changer are ejected consecutively.  
Note  
B
Always guide the CD into the CD-case A with the printed side pointing  
upwards.  
Fig. 160 The CD changer  
Never push the CD with force into the CD-case as the insertion is performed  
automatically.  
The CD changer for the radio and navigation system is housed on the left-  
hand side of the luggage compartment.  
Using the system  
Safety  
Driving Tips  
General Maintenance  
Breakdown assistance  
Technical Data  

Related Topics

Popular Owner Manuals