Get Using the system -> Communication Guide for Skoda Yeti 4 Door First Generation (2009-2013)

Communication 133

Communication

Multifunction steering wheel*

Operate radio und navigation on the multifunction steering wheel

Fig. 155 Multifunction

steering wheel: control

buttons

The driver can set the basic functions of the radio and navigation by simply oper-

ating the buttons located on the steering wheel so that he can concentrate on the

traffic situation without being distracted as little as possible by operating the radio

and navigation ⇒ fig. 155.

9)

This applies only if your vehicle has been installed with radio or navigation system

at the factory. You can of course operate the radio and navigation at the appliance.

You will find a description in the operating instructions of your radio.

When the headlights are switched on, the steering wheel pushbuttons are then also

illuminated.

The buttons apply for the respective operating mode of the current radio or naviga-

tion system.

By pressing the buttons, you can carry out the following functions.

9)

Does not apply for Radio Blues.

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

134 Communication

But-

ton

Action

Radio, traffic information

CD

The CD changer / MP3

Navigation

press briefly

press button for a long period of time

 turn upwards

Switch off/on tone

switch off/on*

1

A

1

A

Increase volume

Decrease volume

1

A

 turn downwards

1

A

Changing to the next stored radio station

Changing to the next stored traffic information

Interrupting the traffic report

Changing to the next title

fast forward

 press briefly

 press button for a long time

 press briefly

2

A

Interruption of the traffic report

2

A

Changing to the previously stored radio station

Changing to the previously stored traffic information

Interrupting the traffic report

Changing to the previous title

fast rewind

3

A

Interruption of the traffic report

 press button for a long time

3

A

Changing the audio source

4

A



 press briefly

 press button for a long time

press briefly

5

A

Calling up the main menu

5

A

6

A

Interruption of the traffic report

without function

press button for a long period of time

6

A

Display of the station list

scroll upwards

Interruption of the traffic reports

Changing to the previous title

 turn upwards

6

A

without function

Display of the station list

scroll downwards

Changing to the next title

 turn downwards

6

A

Interruption of the traffic report

Communication 135

Mobile phones and two-way radio systems

Note

Please also refer to the operating instructions of the mobile phones and two-way

radio systems.

The installation of a mobile phone and two-way radio system in a vehicle should be

carried out by a specialist garage.

Škoda Auto permits the operation of mobile phones and two-way radio systems

with a professionally installed external aerial and a maximum transmission power

of up to 10 watts.

Universal telephone preinstallation GSM II*

It is essential that you inform a specialist garage about the possibilites to assemble

and operate mobile phones and two-way radio sets which have a power output of

more than 10 W. They will inform you which technical possibilities exist for retrofit-

ting mobile telephones and radio transmitters.

Introduction

This enables you to make full use of the advantages of a normal carphone (“hands-

free system - Hands Free” using a microphone integrated in the vehicle, optimal

transmission of signals using an external aerial etc.). The equipment includes

10)

Operation of mobile phones or two-way radio systems may interfere with func-

tioning of the electronic systems of your vehicle. The reasons for this may be:

®

also the voice control. The telephone is connected by means of the Bluetooth

technology ⇒ page 136, “Bluetooth®”. On vehicles fitted with a telephone

•

no external aerial,

mount*, it is also possible to establish the connection via the interface of the

external aerial incorrectly installed,

transmission power greater than 10 watts.

11)

adapter ⇒ page 138, “Operating telephone calls with the aid of the adapter*.”.

A phone phonebook is part of the mobile phone preinstallation with voice control.

In the phone phonebook there are 1 500 free memory locations available. This

phone phonebook is independent of the appliance used for the mobile phone.

You should also be aware of the fact that only an external aerial makes it possible

to achieve the optimal range of such equipment.

Furthermore the volume can be changed individually during the call at any time

with the button for setting the radio* or on vehicles fitted with multifunction

steering wheel* with function buttons on the steering wheel.

WARNING

•

If a mobile phone or a two-way radio system is operated in the vehicle

If the system answers with the voice response “Telephone is not ready”, please

check the operating state of the telephone as follows:

without using a special external aerial or an external aerial which has been

incorrectly installed, this can increase the strength of the electromagnetic

field in the interior of the vehicle.

•

Is the telephone switched on?

Is the PIN code entered?

•

Please concentrate fully at all times on your driving!

You must not install two-way radio systems, mobile phones or mounts

Dialogue

on the covers of the airbags or within the immediate deployment range of

airbags. This might result in injuries to the occupants in the event of an acci-

dent.

The period, in which the telephone system is ready to receive voice commands and

carry out the voice commands, is called DIALOGUE. The system gives audible feed-

back and guides you if necessary through the relevant functions. You can start or

10)

Valid for telephone used with adapter* in the telephone mount.

Not valid for adapter “Bluetooth only” ⇒ page 138.

11)

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

136 Communication

end the dialogue at any time by pressing the PTT button on the adapter*

Caution

⇒ page 138 or on the multifunction steering wheel* ⇒ page 139.

Taking the mobile phone out of the adapter during the call can lead to interruption

of the connection. When taking out the mobile phone, the connection to the

factory-fitted antenna is interrupted, this reduces the quality of the transmitting

and receiving signal. The charging of the mobile phone battery is also interrupted.

The dialogue is always automatically ended after carrying out an operation, e.g.

after erasing the name from the phonebook.

When receiving an incoming call, the dialogue is immediately interrupted and you

can accept the call by pressing the button° on the multifunction steering wheel*

⇒ page 139 or by pressing the button for receiving a call directly on your tele-

phone.

Note

•

Please also refer to the additional instructions ⇒ page 135, “Mobile phones

and two-way radio systems”.

If a voice command is not detected, the system answers with “Sorry?” and a new

entry can be performed. After the 2nd error the system repeats the aid. After the 3rd

error the answer “Cancel” is given and the dialogue is ended.

•

Should you have any questions, please contact a Škoda Service Partner.

Optimum understanding of the voice commands depends on the following

factors:

®

Bluetooth

•

Speak with a normal tone of voice without intonation and excessive voice

pauses.

®

The Bluetooth technology serves as cableless connection of a

mobile phone to a hands-free system of your vehicle.

•

Avoid insufficient articulation.

Close the doors, windows and sliding roof, in order to reduce or stop disturbing

®

In order to connect a mobile phone with Bluetooth to the hands-free

system, it is necessary to adapt the phone and the hands-free system to

each other. Detailed information on this is provided in the operating

instructions of your mobile phone. The following steps must be carried

out for the connection:

exterior noise.

•

It is recommended to speak louder at higher speeds, so that the tone of your

voice is louder than the increased surrounding noise.

•

During the dialogue avoid additional noise in the vehicle, e.g. simultaneously

talking occupants.

–

Switch on the ignition.

•

Do not speak, if the system makes an announcement.

®

Select Bluetooth on the mobile phone and select the menu with

which the mobile phone searches for suitable Bluetooth devices.

The microphone for voice control is directed to the driver and front passenger.

®

Therefore the driver and the front passenger can operate the equipment.

–

If the hands-free system on the display of the mobile phone

announces Skoda UHV, enter the PIN°1234 within 30 seconds and

wait, until the connection is established.

WARNING

12)

Pay attention primarily to the traffic situation! As the driver you are fully

responsible for road safety. Use the telephone system only to such an extent,

so that you are in full control of your vehicle at any time.

Some mobile phones have a menu, in which the authorization for establishing a Bluetooth^®

connection is performed via the input of a code. If the input for the authorization is neces-

sary, it must always be performed when re-establishing the Bluetooth connection.

12)

Communication 137

While connecting the mobile phone with the hands-free system by means of Blue-

•

Please operate your mobile phone exclusively with a suitable adapter in order

to keep a low radiation in the vehicle.

®

tooth , no other phone can be connected with the hands-free system via Blue-

®

tooth

.

•

Inserting the mobile phone into the adapter ensures an optimal sending and

receiving power and offers at the same time the advantage of the battery charging.

Up to three mobile phones can be connected to the hands-free system by means

®

of Bluetooth , whereby only one mobile phone can communicate via Bluetooth

•

Note that the range of the Bluetooth connection to the handsfree-system is

with the hands-free system. If a fourth mobile phone is connected to the hands-

limited to the vehicle interior. The range is dependent on local factors, e.g. obstacles

between the devices and interferences with other devices. If your mobile phone is

free-system, then the telephone, which has not been used together with the hands-

®

free-system for the longest period, is disconnected by means of Bluetooth

.

e.g. in a jacket pocket, this can lead to difficulties when establishing the Bluetooth

connection with the handsfree-system or the data transfer.

®

Establish Bluetooth connection

After switching on the ignition, the Bluetooth connection is automatically estab-

12)

Inserting the mobile phone with the adapter*

lished for the already adapted mobile phone . Check on the mobile unit if the

automatic connection was established.

®

Disconnect Bluetooth connection

®

After withdrawing the ignition key, the Bluetooth connection is disconnected.

WARNING

•

Pay attention primarily to the traffic situation! As the driver you are fully

responsible for road safety. Use the telephone system only to such an extent,

so that you are in full control of your vehicle at any time - risk of accident!

Fig. 156 Universal prepara-

tion for the phone

®

•

In the event of air transport, the Bluetooth function of the handsfree-

system must be switched off by a specialist garage!

Only one telephone mount* is factory-fitted. An adapter for the phone

can be purchased from the Škoda original accessories.

Caution

Taking the mobile phone out of the adapter during the call can lead to interruption

of the connection. When taking out the mobile phone, the connection to the

factory-fitted antenna is interrupted, this reduces the quality of the transmitting

and receiving signal. The charging of the mobile phone battery is also interrupted.

Inserting the mobile phone with the adapter

A

–

First of all push the adapter A in the direction of arrow ⇒ fig. 156 up

to the stop into the mount. Press the adapter slightly downwards, until

it locks securely into position.

Note

A

Insert the mobile phone into the adapter A(as specified in manufac-

®

•

Not valid for all mobile phones which enable a communication via Bluetooth

You can ask at a Škoda Service Partner if your telephone is compatible with the

universal telephone preinstallation GSM II.

.

turer's instructions).

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

138 Communication

®

telephone is connected to the handsfree-system via Bluetooth , this connection is

interrupted.

Removing the mobile phone with the adapter

–

Press simultaneouly the side locks of the mount and remove the

mobile phone and adapter ⇒ page 137, fig. 156.

Adapter “Bluetooth only”

For the adapters which are marked with the “Bluetooth only” logo, the complete

communication between the telephone and the handsfree-system of your vehicle

is carried out only with the help of the Bluetooth technology. If an adapter marked

Operating telephone calls with the aid of the adapter*.

®

in such a way is inserted in the telephone mount, it only serves for recharging the

battery of the telephone and for transmitting the signal onto the outer vehicle

aerial.

Aside from the button PTT, the button SOS can be found on certain adapters

⇒ fig. 158. This button is without function.

Note

The adapters illustrated are only prime examples.

Fig. 157 Illustration image:

Single-button adapter

Fig. 158 Illustration image:

Two-button adapter

The voice control of the telephone is activated by pressing the button PTT (button

push to talk)  on the adapter ⇒ fig. 157 or ⇒ fig. 158.

If you insert the adapter with the telephone in the telephone mount, the handsfree-

system connects to the telephone by means of the interface of the adapter. If the

Communication 139

Operation of the telephone on the multifunction steering wheel*

The driver can set the basic functions of the telephone by simply operating the

buttons located on the steering wheel so that he can concentrate on the traffic situ-

ation without being distracted as little as possible by operating the telephone

⇒ fig. 159.

This applies only if your vehicle has been equiped with the telephone preinstalla-

tion at the factory.

If the side lights are switched on, the buttons on the multifunction steering wheel

are illuminated.

Fig. 159 Multifunction

steering wheel: Control

buttons for the telephone

Overview of the different functions in contrast to the multifunction steering wheel

without mobile phone operation ⇒ page 133.

Button

Action

Operation

Activation and deactivation of the voice control°

(Button PTT - Push to talk)

press briefly

1

A

Increase volume

Decrease volume

 turn upwards

 turn downwards

 press briefly

1

A

1

A

Accept call, terminate call, entry in the main menu of the telephone, list of selected numbers

2

A

 press button for a long

Reject call, entry in the main menu of the telephone, list of selected numbers

2

A

time

Reach one level higher in the menu (according to the current position in the menu)

Return in the main menu of the information display

 press briefly

3

A

 press button for a long

3

A

time

press briefly

Confirm menu selection

4

A

press button for a long

period of time

Confirming the selected menu point, the following initial letters in the telephone book

4

A

The last chosen menu selection, name

The next menu selection, name

 turn upwards

4

A

 turn downwards

4

A

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

140 Communication

The buttons operate the functions for the operating mode of the current

telephone.

Voice commands for mobile phone operation

Voice command

Activity

After this command the PIN code of the mobile

phone can be entered ⇒ page 141.

ENTER PIN/PIN CODE

DIAL NUMBER

REDIAL

Operate the telephone via the information display*

After this command a telephone number can be

entered which establishes a connection to the

requested partner ⇒ page 141.

The display of texts in the menu Telephone is possible in the following languages:

Czech, English, German, French, Italian, Spanish and Russian.

If you select the menu point Telephone on the information display with the aid of

After this command the last selected telephone

number is selected again ⇒ page 142.

4

the handwheel A, you can change to the following menus:

Phone book

Last calls

Voice commands for operating the phone phone book

Received calls

Missed calls

Voice command

SAVE/STORE

Activity

After this command a name with its telephone

NAMES/NAME/NUMBE number can be stored in the phone phone book

Phone book

R

⇒ page 142.

In the menu point Phone book is the list of the loaded contacts from the telephone

memory and the SIM card of the mobile phone. In the phone phonebook there are

1 500 free memory locations available.

After this command a telephone number which was

SELECT NAMES/NAME stored under its given name in the phone phone

book can be selected ⇒ page 143.

After this command a name in the phone phone

DELETE NAMES/NAME

Voice commands

book can be erased ⇒ page 143.

On vehicles which are factory-fitted with a navigation system* with

voice control, it is only possible to operate the voice control via the

navigation system*. The description on how to operate the voice

control can be found in the operating instructions of your navigation

system*.

LISTEN TO/PLAY

PHONEBOOK

After this command you can listen-in to the phone

phone book ⇒ page 144.

After this command the complete phone book or a

name can be erased ⇒ page 144.

DELETE PHONEBOOK

The voice control is possible in the following languages:

Czech, English, German, French, Italian and Spanish.

Communication 141

Other possible commands

•

the mobile phone is switched on.

The digits zero to nine are permitted. The system detects no continuous digit

combinations such as twenty-three, but only individually spoken digits (two, three).

After each order of digits (separation through brief voice pause) the detected digits

are repeated.

Voice command

DIAL

Activity

The telephone number is selected.

In addition to the name in the phone book, which is

selected on the information display, a voice recording

is stored to select with the help of the voice com-

mands or the entered PIN code.

Notes for entering the PIN code

STORE

•

When entering a PIN code with more than 8 digits, the system indicates “The

PIN is too long”.

When entering an incorrect PIN code, the system indicates “The PIN is incor-

rect”.

The entered name or the digits are repeated. Then the

system requests with voice response “please pro-

ceed” the entry of further digits or commands.

•

REPEAT

•

If the incorrect PIN code has been entered three times consecutively, the card

The entered name or the last entered order of digits is

erased. Previously entered groups of digits are

repeated. Then the system requests with voice

response “please proceed” the entry of further digits

or commands.

is blocked. With the aid of the personal unblocking code PUK (Personal Unblock

Key), the SIM card can be unblocked. The unblocking code can only be entered

via the phone keypad and not through the voice control.

BACK

Example for entering the PIN code

All entered digits are erased. Then the system

requests with voice response “The number is

deleted. The number please” the entry of further

digits or commands.

Voice command

Announcement

DELETE

ENTER PIN/PIN CODE

e.g. ZERO ONE TWO THREE

“The PIN please”.

“Zero One Two Three”.

CANCEL

The dialogue is ended.

If no entry is put in, the following announcement is made after about 5 seconds.

“Possible commands are: store, repeat,

correct, delete or more digits”.

Enter PIN code

“The PIN is saved”.

(end of dialogue)

STORE

A PIN code must be entered before operating the system.

–

Press the PTT button.

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

Give the command ENTER PIN/PIN CODE after the signal tone.

After this command the PIN code can be entered.

The entry of the PIN code is only possible if:

Dial number

•

the ignition is switched on;

–

Press the PTT button.

the mobile phone is in the mount;

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

142 Communication

After giving this command, the last number selected via voice input is selected

again.

–

Give the command DIAL NUMBER after the signal tone.

After giving this command, the system requests the entry of a telephone number.

The telephone number can be entered as an interconnected spoken row of digits

(complete number), in the form of order of digits (separation through a brief voice

pause) or through individually spoken digits. After each order of digits (separation

through brief voice pause) the detected digits are repeated.

Example of redial

Voice command

REDIAL

Announcement

“The number is being dialed”.

The digits zero to nine are permitted. The system detects no continuous digit

combinations such as twenty-three, but only individually spoken digits (two, three).

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

If you enter more than 20 digits, the system announces: “The number is too long”.

Additionally for international calls a Plus (+) has to be entered in front of the 20

digits.

Phone voice phonebook*

Example when entering a telephone number

Store name

Voice command

Announcement

–

Press the PTT button.

DIAL NUMBER

“The number please”.

“Zero Six Zero Three”.

Give the command SAVE/STORE NAMES/NAME/NUMBER after the

signal tone.

e.g. ZERO SIX ZERO THREE

If no entry is put in, the following announcement is made after about 5 seconds.

After giving this command, the system requests the entry of a name and a tele-

phone number which should be stored in the phone voice phonebook. In the

phone voice phonebook up to 50 entries can be stored.

“Possible commands are: dial, repeat,

correct, delete or more digits”.

FIVE SEVEN TWO

DIAL

“Five Seven Two”.

The telephone number can be entered as an interconnected spoken row of digits

(complete number), in the form of order of digits (separation through a brief voice

pause) or through individually spoken digits. After each order of digits (separation

through brief voice pause) the detected digits are repeated.

“The number is being dialed”.

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

The digits zero to nine are permitted. The system detects no continuous digit

combinations such as twenty-three, but only individually spoken digits (two, three).

Repeat last call

If you enter more than 20 digits, the system announces: “The number is too long”.

Additionally a Plus (+) has to be entered in front of the 20 digits.

–

Press the PTT button.

The stored entry is shown on the information display* with an asterisk in front of

the name.

Give the command REDIAL after the signal tone.

For similar names additional information (e.g. first names) should be stored.

Communication 143

Example for selecting an entry out of the phone voice phonebook

Example for storing in the phone voice phonebook

Voice command

Announcement

Voice command

Announcement

“The name please”.

“Company xyz”.

SAVE/STORE

NAMES/NAME/NUMBER

SELECT NAMES/NAME

COMPANY XYZ

“The name please”.

COMPANY XYZ

“Please repeat the name”.

“The number please”.

“Zero One Two Three”.

“Four Five Six”.

If no entry is put in, the following announcement is made after about 5 seconds.

COMPANY XYZ

“Possible commands are: dial, repeat, correct”.

ZERO ONE TWO THREE

FOUR FIVE SIX

DIAL

“The number is being dialed”.

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

If no entry is put in, the following announcement is made after about 5 seconds.

“Possible commands are: store, repeat, correct,

delete or more digits”.

Delete names

STORE

“The name COMPANY XYZ is stored”.

–

Press the PTT button.

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

Give the command DELETE NAMES/NAME after the signal tone.

After giving this command, there is the possibility to erase a stored entry in the

phone voice phone book.

Select name

–

Press the PTT button.

Example for erasing an entry out of the phone phonebook

Give the command DIAL/SELECT NAMES/NAME after the signal

Voice command

Announcement

tone.

DELETE NAMES/NAME

“The name please”.

After giving this command, there is the possibility to select a stored entry out of the

phone voice phonebook.

“Do you want to delete the entry Company

xyz?”.

COMPANY XYZ

YES

“Delete?”.

If no entry is put in, the following announcement is made after about 5 seconds.

“Possible commands are: yes, no, repeat, cor-

rect”.

YES

“The name is deleted”.

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

144 Communication

You can interrupt the dialogue at any time by pressing the PTT button or with the

Example for erasing individual names out of the phone phonebook

voice command CANCEL.

Voice command

Announcement

If the user answers with NO, the system answers with “Cancel” and the dialogue is

“Do you want to delete the whole

phonebook?”

ended.

DELETE PHONEBOOK

If no entry is put in, the following announcement is made after about 5 seconds.

Delete voice phonebook

“Possible commands are: yes, no,

repeat”.

–

Press the PTT button.

NO

The phonebook is read out.

Give the command DELETE PHONEBOOK after the signal tone.

When announcing the entry to be

erased, press the PTT button.

“Do you want to delete (name)?”

After giving this command there is the possibility to erase the complete phone

voice phone book or the individually stored names out of the phone phone book.

If no entry is put in, the following announcement is made after about 5 seconds.

Example for erasing the complete phonebook

“Possible commands are: yes, no”.

YES

“The name is deleted”.

Voice command

Announcement

Continue reading out the phone book.

“Do you want to delete the whole

phonebook?”.

DELETE PHONEBOOK

As long as the phonebook is read out, other entries can be erased by pressing the

PTT button.

If no entry is put in, the following announcement is made after about 5 seconds.

“Possible commands are: yes, no,

repeat”.

You can end the dialogue at any time with the voice command CANCEL.

YES

“Are you sure?”.

Listening-in to the phonebook

“The phonebook is deleted”.

–

Press the PTT button.

You can interrupt the dialogue at any time by pressing the PTT button or with the

voice command CANCEL.

Give the command LISTEN TO/PLAY PHONEBOOK after the signal

tone.

After giving this command the phone voice phone book is read out by the system.

By pressing the PTT button when announcing the desired name, the corresponding

telephone number is being dialed; the system answers: “The number is being

dialed”.

Communication 145

Loading a CD

Inputs AUX-IN* and MDI*

A

–

Press on the button A and insert the CD (compact disc) into the CD

The input AUX-IN is located below the armrest* of the front seats and is marked

with .

B

case A. The CD is automatically loaded onto the next free position in

D

the CD-changer. The LED in the corresponding button A stops

flashing.

The input MDI is located in the front centre console.

The inputs AUX-IN and MDI transmit audio signals from connected external audio

sources (e. g. iPod or mp3 player) and record music from these devices via your

radio* or your navigation system* installed in the factory.

Load CDs

A

–

Hold the button A pressed and guide the CDs one after the other

(maximum 6 CDs) into the CD case A. The LEDs in the buttons A

B

D

The description of the operation can be found in the relevant Owner's Manual of

your radio* or your navigation*.

are no longer flashing.

Loading a CD to one definite position

Note

A

D

–

Press on the button A. The LEDs in the buttons A light up at the

•

The loudspeakers in the vehicle are matched to a power output of the radio and

navigation system of 4x 20°W.

For the equipment sound system*, the loudspeakers are matched to a power

memory spaces, which are already assigned and flash in the case of

free memory spaces.

•

D

B

–

Touch the desired button A and guide the CD into the CD-case A.

output of the amplifier of 4x40°W + 6x20 W.

Ejecting a CD

CD changer*

C

–

Briefly press on the button A, in order to eject a CD. For assigned

D

memory spaces, now the LEDs light up in the buttons A.

D

–

Touch the corresponding button A. The CD is ejected.

Ejecting all CDs

C

–

Hold the button Apressed for more than 2 seconds, in order to eject

the CDs. All CDs in the CD-changer are ejected consecutively.

Note

B

•

Always guide the CD into the CD-case A with the printed side pointing

upwards.

Fig. 160 The CD changer

•

Never push the CD with force into the CD-case as the insertion is performed

automatically.

The CD changer for the radio and navigation system is housed on the left-

hand side of the luggage compartment.

Using the system

Safety

Driving Tips

General Maintenance

Breakdown assistance

Technical Data

Using the system -> Communication for Your Skoda Yeti 4 Door First Generation (2009-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals